Natural surface coatings collected from natural substances (NSCsNS) were employed to study the roles of the main chemical components (iron oxides, manganese oxides, and other components) in controlling the adsorpt...Natural surface coatings collected from natural substances (NSCsNS) were employed to study the roles of the main chemical components (iron oxides, manganese oxides, and other components) in controlling the adsorption of lead(Pb) and cadmium(Cd) in aquatic environments. The selective chemical extraction followed by the adsorption of Pb and Cd experiments and statistical analysis, were used to investigate the adsorption property of each component. Hydroxylamine hydrochloride was used to remove manganese oxides selectively, and sodium dithionite was used to extract iron oxides and manganese oxides. The result indicated that iron oxides and manganese oxides played an important role in the adsorption of Pb and Cd on NSCsNS, and the relative contribution was about two-thirds. The contribution of manganese oxides was the greatest, with a lesser role indicated for other components. The adsorption ability of manganese oxides for Pb and Cd was greater than that of iron oxides or other components for Pb and Cd. The Pb adsorption observed in each component was greater than Cd adsorption.展开更多
The comparative studies of Pb and Cd adsorption to the surface coatings(Fe, Mn, Al oxides, organic materials, and associated minerals), which were developed on glass slides in five natural and two technical waters(pla...The comparative studies of Pb and Cd adsorption to the surface coatings(Fe, Mn, Al oxides, organic materials, and associated minerals), which were developed on glass slides in five natural and two technical waters(plant effluents), were carried out under controlled laboratory conditions(mineral salts solution with defined speciation, ionic strength 0 05 mol/L, 25 ℃ and pH 6 0). The classical Langmuir adsorption isotherm was applied to estimating the equilibrium coefficients of Pb and Cd adsorption to the surface coatings. The results show that the maximum adsorption of Pb and Cd to the surface coatings mentioned above varied widely. There was a systemic increase in the maximum adsorption of Pb and Cd to the surface coatings with increasing the contents of Mn and Fe oxides in the surface coatings in significant correlation, respectively, not only highlighting the relative importance of the metal oxide fraction for Pb and Cd adsorption to the surface coatings developed in natural and technical water samples, but also implying the same adsorption mechanisms of Pb and Cd to the surface coatings developed both in natural and technical water samples.展开更多
基金Supported by the National Natural Science Foundation of China(No.20477014).
文摘Natural surface coatings collected from natural substances (NSCsNS) were employed to study the roles of the main chemical components (iron oxides, manganese oxides, and other components) in controlling the adsorption of lead(Pb) and cadmium(Cd) in aquatic environments. The selective chemical extraction followed by the adsorption of Pb and Cd experiments and statistical analysis, were used to investigate the adsorption property of each component. Hydroxylamine hydrochloride was used to remove manganese oxides selectively, and sodium dithionite was used to extract iron oxides and manganese oxides. The result indicated that iron oxides and manganese oxides played an important role in the adsorption of Pb and Cd on NSCsNS, and the relative contribution was about two-thirds. The contribution of manganese oxides was the greatest, with a lesser role indicated for other components. The adsorption ability of manganese oxides for Pb and Cd was greater than that of iron oxides or other components for Pb and Cd. The Pb adsorption observed in each component was greater than Cd adsorption.
基金Supported by the National Natural Science Foundation of China( No. 2 0 0 770 11) and Supporting Program Foundationfor Outstanding Faculties in Chinese U niversities by the State Education Ministry of P.R.China
文摘The comparative studies of Pb and Cd adsorption to the surface coatings(Fe, Mn, Al oxides, organic materials, and associated minerals), which were developed on glass slides in five natural and two technical waters(plant effluents), were carried out under controlled laboratory conditions(mineral salts solution with defined speciation, ionic strength 0 05 mol/L, 25 ℃ and pH 6 0). The classical Langmuir adsorption isotherm was applied to estimating the equilibrium coefficients of Pb and Cd adsorption to the surface coatings. The results show that the maximum adsorption of Pb and Cd to the surface coatings mentioned above varied widely. There was a systemic increase in the maximum adsorption of Pb and Cd to the surface coatings with increasing the contents of Mn and Fe oxides in the surface coatings in significant correlation, respectively, not only highlighting the relative importance of the metal oxide fraction for Pb and Cd adsorption to the surface coatings developed in natural and technical water samples, but also implying the same adsorption mechanisms of Pb and Cd to the surface coatings developed both in natural and technical water samples.