期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
一个玉米ZmMs7复等位基因突变体的遗传分析与分子鉴定
1
作者 曹枭雄 刘伊凡 +9 位作者 周玉强 王婧 吴宇锦 王红武 李坤 刘小刚 黄长玲 刘志芳 郭晋杰 胡小娇 《作物学报》 CAS CSCD 北大核心 2023年第11期2913-2922,共10页
我们在自然群体中发现了一个玉米雄性不育突变体(male sterile mutant),命名为ms20s1。该突变体雄花育性彻底丧失,花药干瘪皱缩,没有花粉形成。细胞学分析发现,与野生型相比,ms20s1突变体花药在S11期表现出明显的药室收缩,绒毡层细胞肿... 我们在自然群体中发现了一个玉米雄性不育突变体(male sterile mutant),命名为ms20s1。该突变体雄花育性彻底丧失,花药干瘪皱缩,没有花粉形成。细胞学分析发现,与野生型相比,ms20s1突变体花药在S11期表现出明显的药室收缩,绒毡层细胞肿胀,小孢子破裂的表型,表明ms20s1突变体绒毡层细胞程序性死亡出现异常,且花粉败育。遗传分析表明该不育性状受单个隐性核基因控制。为克隆目标基因,以ms20s1为母本分别与不同自交系杂交构建F_(2)定位群体,利用靶向测序技术(GBTS)分析群体基因型,将基因定位于7号染色体124.95-128.47 Mb之间,进一步精细定位将该区间缩小到0.68 Mb。生物信息学分析发现,该区间存在一个已知基因ZmMs7。ZmMs7基因编码PHD-finger转录因子,在绒毡层发育和花粉外壁的形成过程中发挥重要作用。等位测验分析发现ms20s1为ZmMs7基因的等位突变体。基因测序结果表明ms20s1突变体在外显子区存在多处序列变异,与所报道的ZmMs7基因已知突变体ms7-6007和ms7gl的突变方式不同,证明ms20s1是一个新的ZmMs7基因等位突变体。突变体ms20s1的发现与鉴定为探讨玉米核雄性不育的分子机制以及育种应用提供了新的材料。 展开更多
关键词 玉米 雄性不育 ms20s1 基因定位 等位突变
下载PDF
玉米籽粒突变体smk7的表型分析和基因定位 被引量:4
2
作者 蒋成功 石慧敏 +7 位作者 王红武 李坤 黄长玲 刘志芳 吴宇锦 李树强 胡小娇 马庆 《作物学报》 CAS CSCD 北大核心 2021年第2期285-293,共9页
利用甲基磺酸乙酯(EMS)对玉米自交系B73进行诱变,获得一个可以稳定遗传的小籽粒突变体smk7(small kernel 7)。smk7成熟籽粒表现为体积变小,胚和胚乳发育缺陷,百粒重显著降低。突变籽粒发芽率仅为10%,且幼苗黄化不能生长成正常植株。成熟... 利用甲基磺酸乙酯(EMS)对玉米自交系B73进行诱变,获得一个可以稳定遗传的小籽粒突变体smk7(small kernel 7)。smk7成熟籽粒表现为体积变小,胚和胚乳发育缺陷,百粒重显著降低。突变籽粒发芽率仅为10%,且幼苗黄化不能生长成正常植株。成熟smk7胚乳中淀粉、蛋白、油分含量与野生型籽粒相比无显著差异,但突变体胚乳淀粉粒体积明显变小且形状不规则。smk7突变籽粒在授粉后12 d即可观察到明显的小籽粒和空瘪表型,石蜡切片显微观察显示突变籽粒的胚和胚乳发育迟缓,胚乳基部转移层细胞(BETL)相对于野生型细胞壁向内生长减少,发育受阻。用杂合植株(+/smk7)与多个自交系分别杂交,构建不同背景的F2分离群体,遗传分析结果表明该性状受单隐性核基因控制。利用靶向测序基因型分型(genotyping by target sequencing,GBTS)技术将基因初定位于2号染色体短臂,进一步精细定位发现该基因位于RM1433917和RM1535316两个标记之间约120 kb的物理范围内,共有8个蛋白编码基因。本研究为进一步克隆和解析SMK7基因调控玉米籽粒发育的分子机制奠定了基础。 展开更多
关键词 玉米 小粒突变体 遗传分析 基因定位
下载PDF
QTL analysis of the developmental changes in cell wall components and forage digestibility in maize(Zea mays L.) 被引量:2
3
作者 LI Kun YANG Xue +8 位作者 LIU Xiao-gang HU Xiao-jiao WU Yu-jin WANG Qi MA Fei-qian LI Shu-qiang WANG Hong-wu LIU Zhi-fang huang chang-ling 《Journal of Integrative Agriculture》 SCIE CAS CSCD 2022年第12期3501-3513,共13页
Cell wall architecture plays a key role in stalk strength and forage digestibility.Lignin,cellulose,and hemicellulose are the three main components of plant cell walls,and they can impact stalk quality by affecting th... Cell wall architecture plays a key role in stalk strength and forage digestibility.Lignin,cellulose,and hemicellulose are the three main components of plant cell walls,and they can impact stalk quality by affecting the structure and strength of the cell wall.To explore cell wall development during secondary cell wall lignification in maize stalks,conventional and conditional genetic mapping were used to identify the dynamic quantitative trait loci(QTLs)of the cell wall components and digestibility traits during five growth stages after silking.Acid detergent lignin(ADL),cellulose(CEL),acid detergent fiber(ADF),neutral detergent fiber(NDF),and in vitro dry matter digestibility(IVDMD)were evaluated in a maize recombinant inbred line(RIL)population.ADL,CEL,ADF,and NDF gradually increased from 10 to 40 days after silking(DAS),and then they decreased.IVDMD initially decreased until 40 DAS,and then it increased slightly.Seventytwo QTLs were identified for the five traits,and each accounted for 3.48–24.04%of the phenotypic variation.Six QTL hotspots were found,and they were localized in the 1.08,2.04,2.07,7.03,8.05,and 9.03 bins of the maize genome.Within the interval of the pleiotropic QTL identified in bin 1.08 of the maize genome,six genes associated with cell wall component biosynthesis were identified as potential candidate genes for stalk strength as well as cell wall-related traits.In addition,26 conditional QTLs were detected in the five stages for all of the investigated traits.Twenty-two of the 26 conditional QTLs were found at 30 DAS conditioned using the values of 20 DAS,and at 50 DAS conditioned using the values of 40 DAS.These results indicated that cell wall-related traits are regulated by many genes,which are specifically expressed at different stages after silking.Simultaneous improvements in both forage digestibility and lodging resistance could be achieved by pyramiding multiple beneficial QTL alleles identified in this study. 展开更多
关键词 quantitative trait loci maize(Zea mays L.) cell wall components forage quality
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部