The Tongling ore cluster area experienced intensive compression and associated shearing during the Indosinian-Yanshanian Epoch, which formed a trunk ore-controlling fold and fault system in the caprock. The magmatic i...The Tongling ore cluster area experienced intensive compression and associated shearing during the Indosinian-Yanshanian Epoch, which formed a trunk ore-controlling fold and fault system in the caprock. The magmatic intrusion in the Yanshanian Epoch induced a multi-stage unmixing of poly-phase fluids, resulting in mineralization characterized by multi-layer, wide-range, and multiform styles. The magmatic intrusion in the Tongling area not only supplied the essential ore-forming materials, but also reconstructed the ore-controlling structures according to a trend surface simulation of the following five strata boundaries: Silurian-Devonian, Devonian-Carboniferous, Carboniferous- Permian, Middle Permian-Upper Permian and Permian -Triassic. The result of this simulation shows that there exists a significant difference between the strata in the upper part and those in the lower. The lower trend surfaces are antiform whereas the upper trend surfaces are synform. In addition, superposing of the trend surfaces of adjacent bed boundaries (such as, Silurian-Devonian boundary superposed upon Devonian-Carboniferous boundary) shows that the lower trend surface always pierces the one above. Moreover, the position and orientation of the pierced parts of the different superposed trend surfaces are similar and show E-W-trending zonal distribution in accordance with the distribution of the regional E-W-trending magmatic-metallogenic belt. Based on comprehensive analysis of the mechanical properties of the strata, structural deformation mechanisms, and field phenomena, it seems that the special characteristics of the stratal trend surface resulted from jacking due to magmatic intrusion into the caprock previously controlled by an E-W-trending basement fault. Therefore, it is deduced that the major ore-controlling structures, which formed during regional horizontal compression, were reconstructed by the vertical jacking function of ore-forming magmas during the Yanshanian Epoch. During the ore-forming process, the local vertical jacking of magmas, coupled with the regional horizontal compression, optimized an extensive environment in the fluid- conduit network and accelerated the unmixing of poly-phase fluids following magmatic emplacement. Jacking also strengthened the vertical and lateral fluid-guiding structures, supplying more suitable physical conditions for multi-layer emplacement and wide-ranging transport of poly-phase fluids.展开更多
During the Paleozoic, the Ordos area in the western North China Plate was located at the intersecting position of microplates and controlled by their interaction. The structural framework in the Ordos area, which unde...During the Paleozoic, the Ordos area in the western North China Plate was located at the intersecting position of microplates and controlled by their interaction. The structural framework in the Ordos area, which underwent transformations in the Ordovician, the Carboniferous and the Permian respectively, was dominated by the alternation of uplift and depression. The transformations of structural framework are utilized as the clues to investigate the microplates' interacting type and its response in the Ordos area. According to the regional structural evolution, the Ordos area is simplified into an isopachous, isotropic and elastic shell model, and under proposed various boundary conditions, three series of numerical simulations corresponding to the three structural transformations are carried out to determine the detailed tectonic constraints. Numerical simulations reveal that the structure of the uplift and depression, which is similar to the actual pattern, develops only under one special boundary condition in each of the three series, indicating that the structural framework responds to the unique tectonic background. The simulation results show that in the Early Paleozoic, the L-shaped paleouplift formed nearby the southwestern corner of the Ordos area because the intensity of the compressions in the southern and western boundaries resulting from the ocean-continent collisions was similar. In the Late Paleozoic, it evolved into continent-continent (or arc-continent) interaction in the southern and northern boundaries; in the preliminary stage of the interaction, since the interface between the North China Plate and the plates on the south and north was narrow, the relative acting force was little and the regional western boundary immobile, and the structural framework in the basin was characterized by the N-S trending slender-waist-shaped uplift; as the interface between the plates expanded gradually, the extrusive force in the southern and northern boundaries of the North China Plate increased, resulting in the paleogeographic divisions showing E-W trending, and, the western boundary of the basin was extruded westward due to the intense compression inducing the local NE trending of paleogeographic division in the central area. The simulation results further reflect that the symmetry of the uplift-depression pattern is restricted by that of the boundary conditions, suggesting that the Paleozoic structural transformations of the Ordos area under boundary constraints accord with the universal physical symmetrical principle.展开更多
基金the Fostering Plan Fund for Beyond-Century Excellent Talent of the Ministry of Education the Science and Technology Key Item of the Ministry of Education (No. 03178)+4 种基金 the National Natural Science Foundation of China (No. 40234051) the 0pen Foundation of the State Key Laboratory of Geological Processes and Mineral Resources (GPMR0528) the China Postdoctoral Science Foundation (2005038361) the Special Plans of Science and Technology of the Land Resources Department (No. 20010103) the 111 Project (No. B07011).
文摘The Tongling ore cluster area experienced intensive compression and associated shearing during the Indosinian-Yanshanian Epoch, which formed a trunk ore-controlling fold and fault system in the caprock. The magmatic intrusion in the Yanshanian Epoch induced a multi-stage unmixing of poly-phase fluids, resulting in mineralization characterized by multi-layer, wide-range, and multiform styles. The magmatic intrusion in the Tongling area not only supplied the essential ore-forming materials, but also reconstructed the ore-controlling structures according to a trend surface simulation of the following five strata boundaries: Silurian-Devonian, Devonian-Carboniferous, Carboniferous- Permian, Middle Permian-Upper Permian and Permian -Triassic. The result of this simulation shows that there exists a significant difference between the strata in the upper part and those in the lower. The lower trend surfaces are antiform whereas the upper trend surfaces are synform. In addition, superposing of the trend surfaces of adjacent bed boundaries (such as, Silurian-Devonian boundary superposed upon Devonian-Carboniferous boundary) shows that the lower trend surface always pierces the one above. Moreover, the position and orientation of the pierced parts of the different superposed trend surfaces are similar and show E-W-trending zonal distribution in accordance with the distribution of the regional E-W-trending magmatic-metallogenic belt. Based on comprehensive analysis of the mechanical properties of the strata, structural deformation mechanisms, and field phenomena, it seems that the special characteristics of the stratal trend surface resulted from jacking due to magmatic intrusion into the caprock previously controlled by an E-W-trending basement fault. Therefore, it is deduced that the major ore-controlling structures, which formed during regional horizontal compression, were reconstructed by the vertical jacking function of ore-forming magmas during the Yanshanian Epoch. During the ore-forming process, the local vertical jacking of magmas, coupled with the regional horizontal compression, optimized an extensive environment in the fluid- conduit network and accelerated the unmixing of poly-phase fluids following magmatic emplacement. Jacking also strengthened the vertical and lateral fluid-guiding structures, supplying more suitable physical conditions for multi-layer emplacement and wide-ranging transport of poly-phase fluids.
文摘During the Paleozoic, the Ordos area in the western North China Plate was located at the intersecting position of microplates and controlled by their interaction. The structural framework in the Ordos area, which underwent transformations in the Ordovician, the Carboniferous and the Permian respectively, was dominated by the alternation of uplift and depression. The transformations of structural framework are utilized as the clues to investigate the microplates' interacting type and its response in the Ordos area. According to the regional structural evolution, the Ordos area is simplified into an isopachous, isotropic and elastic shell model, and under proposed various boundary conditions, three series of numerical simulations corresponding to the three structural transformations are carried out to determine the detailed tectonic constraints. Numerical simulations reveal that the structure of the uplift and depression, which is similar to the actual pattern, develops only under one special boundary condition in each of the three series, indicating that the structural framework responds to the unique tectonic background. The simulation results show that in the Early Paleozoic, the L-shaped paleouplift formed nearby the southwestern corner of the Ordos area because the intensity of the compressions in the southern and western boundaries resulting from the ocean-continent collisions was similar. In the Late Paleozoic, it evolved into continent-continent (or arc-continent) interaction in the southern and northern boundaries; in the preliminary stage of the interaction, since the interface between the North China Plate and the plates on the south and north was narrow, the relative acting force was little and the regional western boundary immobile, and the structural framework in the basin was characterized by the N-S trending slender-waist-shaped uplift; as the interface between the plates expanded gradually, the extrusive force in the southern and northern boundaries of the North China Plate increased, resulting in the paleogeographic divisions showing E-W trending, and, the western boundary of the basin was extruded westward due to the intense compression inducing the local NE trending of paleogeographic division in the central area. The simulation results further reflect that the symmetry of the uplift-depression pattern is restricted by that of the boundary conditions, suggesting that the Paleozoic structural transformations of the Ordos area under boundary constraints accord with the universal physical symmetrical principle.