期刊文献+
共找到5篇文章
< 1 >
每页显示 20 50 100
SLA 3D打印用有机硅树脂的制备研究 被引量:5
1
作者 李松 黄宇刚 +3 位作者 卢依婷 高锋 华标 李盛 《塑料工业》 CAS CSCD 北大核心 2019年第10期143-147,共5页
利用光固化三维(3D)打印技术对有机硅材料进行成型加工,需要先对有机硅材料进行光敏改性。采用硅氢加成与酯交换的方法,在硅油上引入丙烯基团,制备出一种立体光固化(SLA)3D打印用光敏有机硅预聚体。在此基础上,对不同种类的光引发剂在... 利用光固化三维(3D)打印技术对有机硅材料进行成型加工,需要先对有机硅材料进行光敏改性。采用硅氢加成与酯交换的方法,在硅油上引入丙烯基团,制备出一种立体光固化(SLA)3D打印用光敏有机硅预聚体。在此基础上,对不同种类的光引发剂在光敏有机硅预聚体中的溶解度、固化时间及用量进行了探索;在具有最佳效果的光引发剂的种类与用量下,对光敏有机硅树脂固化深度进行了探索;确定了最佳光固化效果的配方后,对光敏有机硅树脂进行了光固化3D打印成型。结果表明,在实验选材范围内,光引发剂2,4,6-三甲基苯甲酰基-二苯基氧化膦(TPO)在光敏有机硅中具有较大的溶解度与较好的光引发效果;当光引发剂TPO的用量为4%时,光敏有机硅树脂具有较好的光反应特性;在不用活性稀释剂、溶剂以及热能的条件下,制备的有机硅光敏树脂可以在SLA3D打印机中完整地成型出制件。 展开更多
关键词 有机硅 光固化三维打印 光敏特性 预聚体 制备
下载PDF
Hydrological characteristics and changes in the Nu-Salween River basin revealed with model-based reconstructed data 被引量:1
2
作者 YANG Fan LU Hui +6 位作者 YANG Kun huang Guang-wei LI Yi-shan WANG Wei LU Ping TIAN Fu-qiang huang yu-gang 《Journal of Mountain Science》 SCIE CSCD 2021年第11期2982-3002,共21页
The Nu-Salween River(NSR),the longest free-flow river in Southeast Asia,plays an irreplaceable role in social development and ecological protection.The lower NSR region is particularly valuable as it is inhabited by a... The Nu-Salween River(NSR),the longest free-flow river in Southeast Asia,plays an irreplaceable role in social development and ecological protection.The lower NSR region is particularly valuable as it is inhabited by approximately 6.7 million people.The basin has limited hydraulic conservancy infrastructure and insufficient ability to cope with climate change risks.Studying the hydrological characteristics and changes in the basin provides the scientific basis for rational protection and development of the basin.However,owing to the limitation of observation data,previous studies have focused on the local area and neglected the study of the lower reaches,which is not enough to reflect the spatial characteristics of the entire basin.In this study,the ECMWF 5th generation reanalysis data(ERA5)and Multi-Source Weighted-Ensemble Precipitation(MSWEP)were applied to develop a geomorphology-based hydrological model(GBHM)for reconstructing hydrological datasets(i.e.GBHM-ERA5 and GBHM-MSWEP).The reconstructed datasets covering the complete basin were verified against the gauge observation and compared with other commonly used streamflow products,including Global Flood Awareness System v2.1,GloFAS-Reanalysis dataset v3.0,and linear optimal runoff aggregate(LORA).The comparison results revealed that GBHM-ERA5 is significantly better than the other four datasets and provides a good reproduction of the hydrological characteristics and trends of the NSR.Detailed analysis of GBHM-ERA5 revealed that:(1)A multi-year mean surface runoff represented 39%of precipitation over the basin during 1980–2018,which had low surface runoff in the upstream,while areas around the Three Parallel Rivers Area and the estuary had abundant surface runoff.(2)The surface runoff and discharge coefficient of variations in spring were larger than those in other seasons,and the inter-annual variation in the downstream was smaller than that in the upstream and midstream regions.(3)More than 70%of the basin areas showed a decreasing trend in the surface runoff,except for parts of Nagqu,south of Shan State in Myanmar,and Thailand,where surface runoff has an increasing trend.(4)The downstream discharge has dropped significantly at a rate of approximately 680 million cubic metresper year,and the decline rate is greater than that of upstream and midstream,especially in summer.This study provides a data basis for subsequent studies in the NSR basin and further elucidates the impact of climate change on the basin,which is beneficial to river planning and promotes international cooperation on the water-and eco-security of the basin. 展开更多
关键词 Nu-Salween River Distributed hydrologic model ERA5 Surface runoff DISCHARGE Climate Change
下载PDF
基于GMO的立方晶前体溶液液体栓塞剂相态转变过程的研究
3
作者 杜玲然 严立标 +4 位作者 黄剑文 余宗峻 杨海南 黄玉刚 李旭丰 《合成材料老化与应用》 2019年第4期10-14,共5页
实验通过乙醇扩散、甘油单油酸酯(GMO)吸水动态研究3种前体溶液液体栓塞剂在过量水中从液体转化为凝胶的过程,在相图中绘制其变化趋势。采用偏光显微镜(PLM)、小角射线衍射(SAXS)和流变学方法鉴别各凝胶样品的相态。结果证实,基于GMO的... 实验通过乙醇扩散、甘油单油酸酯(GMO)吸水动态研究3种前体溶液液体栓塞剂在过量水中从液体转化为凝胶的过程,在相图中绘制其变化趋势。采用偏光显微镜(PLM)、小角射线衍射(SAXS)和流变学方法鉴别各凝胶样品的相态。结果证实,基于GMO的立方晶前体溶液液体栓塞剂在过量水中均可以转化成Pn3m立方晶相凝胶。 展开更多
关键词 甘油单油酸酯 立方晶 液体栓塞剂 相态转变
下载PDF
离子交换型微球栓塞剂的载药及可视化研究
4
作者 李旭丰 付纪军 +5 位作者 严立标 余宗峻 黄剑文 杨海南 黄玉刚 杜玲然 《合成材料老化与应用》 2018年第5期106-109,共4页
商业化离子交换型微球栓塞剂仅能负载荷正电的药物,且本身不能被X射线、CT或MRI检测,在现有的影像学设备下不可视,不利于栓塞术中监控和术后复查。该文总结了离子交换型微球栓塞剂载药及可视化方面的研究报道,介绍了前沿最新进展以及在... 商业化离子交换型微球栓塞剂仅能负载荷正电的药物,且本身不能被X射线、CT或MRI检测,在现有的影像学设备下不可视,不利于栓塞术中监控和术后复查。该文总结了离子交换型微球栓塞剂载药及可视化方面的研究报道,介绍了前沿最新进展以及在临床研究与应用中的现状,最后提出离子交换型微球栓塞剂在载药及可视化方面将来的发展方向。 展开更多
关键词 离子交换型微球栓塞剂 动脉栓塞 可视化 药物载体
下载PDF
浅谈智慧客车云控平台的研究与应用
5
作者 黄宇刚 谭福伦 +3 位作者 王俊红 黄苏杭 李青川 费帮生 《汽车电器》 2021年第9期16-17,共2页
客车智能化的发展在产品集成度和客户体验上带来了很大提升,但与此同时也对设计开发、品质管控和售后服务提出了更高要求,面对智慧客车大数据带来的机遇和挑战,从信息交互、OTA远程升级、大数据深度挖掘、远程智能控制等维度,创建新一... 客车智能化的发展在产品集成度和客户体验上带来了很大提升,但与此同时也对设计开发、品质管控和售后服务提出了更高要求,面对智慧客车大数据带来的机遇和挑战,从信息交互、OTA远程升级、大数据深度挖掘、远程智能控制等维度,创建新一代车载信息交互云控平台。 展开更多
关键词 智慧客车 大数据 云控平台
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部