Sodium borosilicate glasses are candidate materials for high-level radioactive waste vitrification;therefore, understanding the irradiation effects in model borosilicate glass is crucial. Effects of electronic energy ...Sodium borosilicate glasses are candidate materials for high-level radioactive waste vitrification;therefore, understanding the irradiation effects in model borosilicate glass is crucial. Effects of electronic energy deposition and nuclear energy deposition induced by the impact of heavy ions on the hardness and Young’s modulus of sodium borosilicate glass were investigated. The work concentrates on sodium borosilicate glasses, henceforth termed NBS1 (60.0% SiO2, 15.0% B2O3, and 25.0% Na2O in mol%). The NBS1 glasses were irradiated by P, Kr, and Xe ions with 0.3 MeV, 4 MeV, and 5 MeV, respectively. The hardness and Young’s modulus of ion-irradiated NBS1 glasses were measured by nanoindentation tests. The relationships between the evolution of the hardness, the change in the Young’s modulus of the NBS1 glasses, and the energy deposition were investigated. With the increase in the nuclear energy deposition, both the hardness and Young’s modulus of NBS1 glasses dropped exponentially and then saturated. Regardless of the ion species, the nuclear energy depositions required for the saturation of hardness and Young’s modulus were apparent at approximately 1.2 × 10^20 keV/cm^3 and 1.8 × 10^20 keV/cm^3, respectively. The dose dependency of the hardness and Young’s modulus of NBS1 glasses was consistent with previous studies by Peuget et al. Moreover, the electronic energy loss is less than 4 keV/nm, and the electronic energy deposition is less than 3.0 × 10^22 keV/cm^3 in this work. Therefore, the evolution of hardness and Young’s modulus could have been primarily induced by nuclear energy deposition.展开更多
Based on the IBUU transport model, the effect of proton transition momentum on collective flows is studied in ^40Ca + ^40Ca,^112Sn + ^112Sn, and ^197Au + ^197Au collisions at an incident beam energy of 400 MeV/A with ...Based on the IBUU transport model, the effect of proton transition momentum on collective flows is studied in ^40Ca + ^40Ca,^112Sn + ^112Sn, and ^197Au + ^197Au collisions at an incident beam energy of 400 MeV/A with impact parameter b=6 fm. It is found that in a neutron rich system, the difference between neutron and proton elliptic flow is largely affected by the proton transition momentum. At beam energies around (and particularly below) the pion production threshold, the π^-/π^+ ratio is greatly sensitive to proton transition momentum in asymmetric nuclear matter. This study may help us to understand the nucleon momentum distribution in nuclei, which is important for the equation of state of asymmetric nuclear matter, such as neutron stars.展开更多
基金supported by the National Natural Science Foundations of China(Nos.11505085 and 11505086)the Fundamental Research Funds for the Central Universities(No.lzujbky-2018-72)DSTI Foundation of Gansu(No.2018ZX-07)
文摘Sodium borosilicate glasses are candidate materials for high-level radioactive waste vitrification;therefore, understanding the irradiation effects in model borosilicate glass is crucial. Effects of electronic energy deposition and nuclear energy deposition induced by the impact of heavy ions on the hardness and Young’s modulus of sodium borosilicate glass were investigated. The work concentrates on sodium borosilicate glasses, henceforth termed NBS1 (60.0% SiO2, 15.0% B2O3, and 25.0% Na2O in mol%). The NBS1 glasses were irradiated by P, Kr, and Xe ions with 0.3 MeV, 4 MeV, and 5 MeV, respectively. The hardness and Young’s modulus of ion-irradiated NBS1 glasses were measured by nanoindentation tests. The relationships between the evolution of the hardness, the change in the Young’s modulus of the NBS1 glasses, and the energy deposition were investigated. With the increase in the nuclear energy deposition, both the hardness and Young’s modulus of NBS1 glasses dropped exponentially and then saturated. Regardless of the ion species, the nuclear energy depositions required for the saturation of hardness and Young’s modulus were apparent at approximately 1.2 × 10^20 keV/cm^3 and 1.8 × 10^20 keV/cm^3, respectively. The dose dependency of the hardness and Young’s modulus of NBS1 glasses was consistent with previous studies by Peuget et al. Moreover, the electronic energy loss is less than 4 keV/nm, and the electronic energy deposition is less than 3.0 × 10^22 keV/cm^3 in this work. Therefore, the evolution of hardness and Young’s modulus could have been primarily induced by nuclear energy deposition.
基金Partially supported by the National Natural Science Foundation of China(11875152,11675066,U1867207,11505085)
文摘Based on the IBUU transport model, the effect of proton transition momentum on collective flows is studied in ^40Ca + ^40Ca,^112Sn + ^112Sn, and ^197Au + ^197Au collisions at an incident beam energy of 400 MeV/A with impact parameter b=6 fm. It is found that in a neutron rich system, the difference between neutron and proton elliptic flow is largely affected by the proton transition momentum. At beam energies around (and particularly below) the pion production threshold, the π^-/π^+ ratio is greatly sensitive to proton transition momentum in asymmetric nuclear matter. This study may help us to understand the nucleon momentum distribution in nuclei, which is important for the equation of state of asymmetric nuclear matter, such as neutron stars.