Preparation of aromatic hydrocarbons from catalytic pyrolysis of digestate

Catalytic pyrolysis of digestate to produce aromatic hydrocarbons can be combined with anaerobic fermentation to effectively transform and utilize all biomass components,which can achieve the meaningful purpose of transforming waste into high-value products.This study explored whether catalytic pyrolysis of digestate is feasible to prepare aromatic hydrocarbons by analyzing the thermogravimetric characteristics,pyrolysis characteristics,and catalytic pyrolysis characteristics of digestate.For digestate pyrolysis,an increase in temperature was found to elevate the CO,CH_4,and monocyclic aromatic hydrocarbon(benzene,toluene,and xylene;BTX)content,whereas it decreased the contents of phenols,acids,aldehydes,and other oxygenates.Furthermore,the catalytic pyrolysis process effectively inhibited the acids,phenols,and furans in the liquid,whereas the yield of BTX increased from 25.45%to 45.99%,and the selectivity of xylene was also increased from 10.32%to 28.72%after adding ZSM-5.ZSM-5 also inhibited the production of nitrogenous compounds.

Electrochemical behaviors of silicon wafers in silica slurry

The electrochemical behaviors of n-type silicon wafers pH value and solid content of the slurry on the corrosion of silicon in silica-based slurry were investigated, and the influences of the wafers were studied by using electrochemical DC polarization and AC impedance techniques. The results revealed that these factors affected the corrosion behaviors of silicon wafers to different degrees and had their suitable parameters that made the maximum corrosion rate of the wafers. The corrosion potential of （100） sttrface was lower than that of（111）, whereas the current density of （100） was much higher than that of（111）.

Clinical relevance of distolingual roots and periodontal status in mandibular first molars: a cross-sectional study employing CBCT analysis

Objectives:Distolingual root of the permanent mandibular first molar(PMFM-DLR)has been frequently reported,which may complicate the treatment of periodontitis.This study aimed to assess the morphological features of PMFM-DLR and investigate the correlation between the morphological features of PMFM-DLR and periodontal status in patients with Eastern Chinese ethnic background.Materials and methods:A total of 836 cone beam computed tomography(CBCT)images with 1497 mandibular first molars were analyzed to observe the prevalence of PMFM-DLR at the patients and tooth levels in Eastern China.Among them,complete periodontal charts were available for 69 Chinese patients with 103 teeth.Correlation and regression analyses were used to evaluate the correlation between the morphological features of DLR,bone loss,and periodontal clinical parameters,including clinical attachment loss(CAL),probing pocket depth(PPD),gingival recession(GR),and furcation involvement(FI).Results:The patient-level prevalence and tooth-level prevalence of DLR in mandibular first molars were 29.4%and 26.3%,respectively.Multiple linear regression analysis suggested that bone loss at the lingual site and CAL were negatively affected by the angle of separation between distolingual and mesial roots in the transverse section,while they were significantly influenced by age and the angle of separation between distobuccal and mesial roots in the coronal section.Conclusions:The prevalence of PMFM-DLR in Eastern China was relatively high in our cohort.The morphological features of DLR were correlated with the periodontal status of mandibular first molars.This study provides critical information on the morphological features of DLR for improved diagnosis and treatment options of mandibular molars with DLR.

A genomic association study revealing subphenotypes of childhood steroid-sensitive nephrotic syndrome in a larger genomic sequencing cohort

Dissecting the genetic components that contribute to the two main subphenotypes of steroid-sensitive nephrotic syndrome(SSNS)using genome-wide association studies(GWAS)strategy is important for understanding the disease.We conducted a multicenter cohort study(360 patients and 1835 controls)combined with a GWAS strategy to identify susceptibility var-iants associated with the following two subphenotypes of ssNS:steroid-sensitive nephrotic syn-drome without relapse(SSNswR,181 patients)and steroid-dependent/frequent relapse nephrotic syndrome(SDNS/FRNS,179 patients).The distribution of two single-nucleotide poly-morphisms(SNPs)in ANKRD36 and ALPG was significant between SSNSWR and healthy controls,and that of two SNPs in GAD1 and HLA-DQA1 was significant between SDNS/FRNS and healthy controls.Interestingly,rs1047989 in HLA-DQA1 was a candidate locus for SDNS/FRNS but not for SSNSWR.No significant SNPs were observed between SSNSWR and SDNS/FRNS.Meanwhile,chromosome 2:171713702 in GAD1 was associated with a greater steroid dose(>0.75 mg/kg/d)upon relapse to first remission in patients with SDNS/FRNS(odds ratio=3.14;95%confidence interval,0.97-9.87;P=0.034).rs117014418 in APOL4 was significantly associated with a decrease in eGFR of greater than 20%compared with the baseline in SDNS/FRNS patients(P=0.0001).Protein-protein intersection network construction suggested that HLA-DQA1 and HLA-DQB1 function together through GSDMA.Thus,SSNSWR belongs to non-HLA region-dependent nephropathy,and the HLA-DQA/DQB region is likely strongly associated with dis-ease relapse,especially in SDNS/FRNS.The study provides a novel approach for the GWAS strategy of SsNS and contributes to our understanding of the pathological mechanisms of SSNSWRandSDNS/FRNS.

Highly efficient chemicalproductionviaelectrified,transient high-temperature synthesis

In response to the current energy and environmental challenges,reducing or replacing reliance on fossil fuels and striving for carbon neutrality seems to be the only viable choice.Recently,a cutting-edge,eco-friendly method of chemical synthesis via transient Joule heating(JH)demonstrated significant promise across various domains,including methane reforming,ammonia synthesis,volatile organic compounds removal,plastic recycling,the synthesis of functional carbon materials from repurposed solid waste,etc.In this review,the advantages,and latest developments in thermochemical synthesis by flash and transient JH are comprehensively outlined.Unlike the ongoing heating process of conventional furnaces that consume fossil fuels,dynamic and transient JH can get significantly higher reaction rates,energy efficiency,flexibility,and versatility.Subsequently,the transient reaction mechanism,data science optimization,and scale-up production models are discussed,and prospects for the integration of the electrified chemical industry with renewable energy for carbon neutrality and long-term energy storage are also envisioned.

Catalytic hydrogenolysis of organosolv lignin: Cleaving C–O bonds over CuMgAlO_(x)-layered porous metal oxide catalysts for oriented monophenols production

To understand the catalytic conversion of lignin into high-value products,lignin depolymerization was performed using a layered polymetallic oxide(CuMgAlO_(x))catalyst.The effects of the conversion temperature,hydrogen pressure,and reaction time were studied,and the ability of CuMgAlO_(x)to break the C–O bond was evaluated.The CuMgAlO_(x)(Mg/Al=3:1)catalyst contained acidic sites and had a relatively homogeneous elemental distribution with a high pore size and specific surface area.Theβ-O-4 was almost completely converted by disassociating the C–O bond,resulting in yields of 14.74%ethylbenzene,47.58%α-methylphenyl ethanol,and 36.43%phenol.The highest yield of lignin-derived monophenols was 85.16%under reaction conditions of 280℃ and 3 Mpa for 4 h.As the reaction progressed,depolymerization and condensation reactions occurred simultaneously.Higher temperatures(>280℃)and pressures(>3 Mpa)tended to produce solid char.This study establishes guidelines for the high-value application of industrial lignin in the catalytic conversion of polymetallic oxides.

Whole-exome sequencing of a multicenter cohort identifies genetic changes associated with clinical phenotypes in pediatric nephrotic syndrome

Understanding the association between the genetic and clinical phenotypes in children with nephrotic syndrome(NS)of different etiologies is critical for early clinical guidance.We employed whole-exome sequencing(WES)to detect monogenic causes of NS in a multicenter cohort of 637 patients.In this study,a genetic cause was identified in 30.0%of the idiopathic steroid-resistant nephrotic syndrome(SRNS)patients.Other than congenital nephrotic syndrome(CNS),there were no significant differences in the incidence of monogenic diseases based on the age at manifestation.Causative mutations were detected in 39.5%of patients with focal segmental glomerulosclerosis(FSGS)and 9.2%of those with minimal change disease(MCD).In terms of the patterns in patients with different types of steroid resistance,a single gene mutation was identified in 34.8%of patients with primary resistance,2.9%with secondary resistance,and 71.4%of children with multidrug resistance.Among the various intensified immunosuppressive therapies,tacrolimus(TAC)showed the highest response rate,with 49.7%of idiopathic SRNS patients achieving complete remission.Idiopathic SRNS patients with monogenic disease showed a similar multidrug resistance pattern,and only 31.4%of patients with monogenic disease achieved a partial remission on TAC.During an average 4.1-year follow-up,21.4%of idiopathic SRNS patients with monogenic disease progressed to end-stage renal disease(ESRD).Collectively,this study provides evidence that genetic testing is necessary for presumed steroid-resistant and idiopathic SRNS patients,especially those with primary and/or multidrug resistance.

Inventory of CO2 emissions driven by energy consumption in Hubei Province： a time-series energy input-output analysis

Based on an input-output analysis, this paper compiles inventories of fuel-related CO2 emissions of Hubei economy in the years of 2002, 2005, and 2007. Results show that calculated total direct CO2 emissions rose from 114,462.69 kt （2002） to 196,650.31 kt （2005）, reaching 210,419.93 kt in 2007, with an average 22.50% rate of increase. Raw coal was the dominant source of the direct emissions throughout the three years. The sector of Electric Power, Heat Production, and Supply was the main direct emissions contributor, with the largest intensities observed from 2002 （1192.97 g/CNY） to 2007 （1739.15 g/ CNY）. From the industrial perspective, the secondary industry, which is characterized as manufacture of finished products, was still the pillar of the Hubei economy during this period concerned, contributing more than 80% of the total direct emissions. As a net exporter of embodied CO2 emissions in 2002 and 2007, Hubei reported net-exported emissions of 4109.00 kt and 17,871.77 kt respectively; however, Hubei was once a net importer of CO2 emissions in 2005 （2511.93 kt）. The CO2 emissions embodied in export and fixed capital formation had the two leading fractions of emissions embodied in the final use. The corresponding countermeasures, such as promoting renew- able and clean energy and properly reducing the exports of low value added and carbon-intensive products are suggestions for reducing CO2 emissions in Hubei.