In the present research, effect of silica fume as an additive and oil polluted sands as aggregates on compressive strength of concrete were investigated experimentally. The amount ofoil in the designed mixtures was as...In the present research, effect of silica fume as an additive and oil polluted sands as aggregates on compressive strength of concrete were investigated experimentally. The amount ofoil in the designed mixtures was assumed to be constant and equal to 2% of the sand weight. Silica fume accounting for 10%, 15% and 20% of the weight is added to the designed mixture. After preparation and curing, concrete specimens were placed into the three different conditions： fresh, brackish and saltwater environments （submerged in fresh water, alternation of exposed in air ＆ submerged in sea water and submerged in sea water）. The result of compressive strength tests shows that the compressive strength of the specimens consisting of silica fume increases significantly in comparison with the control specimens in all three environments. The compressive strength of the concrete with 15% silica fume content was about 30% to 50% higher than that of control specimens in all tested environments under the condition of using polluted aggregates in the designed mixture.展开更多
In this study, the passage of waves through pile groups with different arrangements is investigated using a three-dimensional(3D)numerical model. For the simulations, waves of three different heights of 36, 58, and 81...In this study, the passage of waves through pile groups with different arrangements is investigated using a three-dimensional(3D)numerical model. For the simulations, waves of three different heights of 36, 58, and 81 mm, a fixed period of 0.88s, and a fixed wave length of 1.128 m were used. To simulate the waves and flow pattern through the piles, Reynolds-averaged Navier–Stokes(RANS) equations of fluid motion were solved based on the finite volume method(FVM). Piles were defined as obstacles in the rectangular domain using the fractional area/volume obstacle representation(FAVOR) method. The volume-of-fluid(VOF) and re-normalization group(RNG) methods were used to simulate the free surface and turbulence phenomenon, respectively. By performing different numerical simulations, the effect of coastal pile arrangements on wave pattern was studied and was compared with existing experimental data, and an acceptable agreement was achieved.展开更多
Vortex formation over the intakes is an unde- sirable phenomenon within the water withdrawal process from a dam reservoir. Calculating the minimum operating water level in power intakes by empirical equations is not a...Vortex formation over the intakes is an unde- sirable phenomenon within the water withdrawal process from a dam reservoir. Calculating the minimum operating water level in power intakes by empirical equations is not a safe way and sometimes contains some errors. Therefore, current method to calculate the critical submergence of a power intake is construction of a scaled physical model in parallel with numerical model. In this research some pro- posed empirical relations for prediction of submergence depth in power intakes were validated with experimental data of different physical and numerical models of power intakes. Results showed that, equations which involved the geometry of intake have better correspondence with the experimental and numerical data.展开更多
基金the support of the Chabahar Maritime University for supporting this program and usage concrete laboratory of Civil Engineering Department
文摘In the present research, effect of silica fume as an additive and oil polluted sands as aggregates on compressive strength of concrete were investigated experimentally. The amount ofoil in the designed mixtures was assumed to be constant and equal to 2% of the sand weight. Silica fume accounting for 10%, 15% and 20% of the weight is added to the designed mixture. After preparation and curing, concrete specimens were placed into the three different conditions： fresh, brackish and saltwater environments （submerged in fresh water, alternation of exposed in air ＆ submerged in sea water and submerged in sea water）. The result of compressive strength tests shows that the compressive strength of the specimens consisting of silica fume increases significantly in comparison with the control specimens in all three environments. The compressive strength of the concrete with 15% silica fume content was about 30% to 50% higher than that of control specimens in all tested environments under the condition of using polluted aggregates in the designed mixture.
文摘In this study, the passage of waves through pile groups with different arrangements is investigated using a three-dimensional(3D)numerical model. For the simulations, waves of three different heights of 36, 58, and 81 mm, a fixed period of 0.88s, and a fixed wave length of 1.128 m were used. To simulate the waves and flow pattern through the piles, Reynolds-averaged Navier–Stokes(RANS) equations of fluid motion were solved based on the finite volume method(FVM). Piles were defined as obstacles in the rectangular domain using the fractional area/volume obstacle representation(FAVOR) method. The volume-of-fluid(VOF) and re-normalization group(RNG) methods were used to simulate the free surface and turbulence phenomenon, respectively. By performing different numerical simulations, the effect of coastal pile arrangements on wave pattern was studied and was compared with existing experimental data, and an acceptable agreement was achieved.
文摘Vortex formation over the intakes is an unde- sirable phenomenon within the water withdrawal process from a dam reservoir. Calculating the minimum operating water level in power intakes by empirical equations is not a safe way and sometimes contains some errors. Therefore, current method to calculate the critical submergence of a power intake is construction of a scaled physical model in parallel with numerical model. In this research some pro- posed empirical relations for prediction of submergence depth in power intakes were validated with experimental data of different physical and numerical models of power intakes. Results showed that, equations which involved the geometry of intake have better correspondence with the experimental and numerical data.
