The 26 November 2005 Jiujiang-Ruichang, Jiangxi, Ms 5.7 earthquake occurred in a seismotectonic setting of moderate earthquake. The northwest-trending Xiangfan-Guangji fault （XFG） does not enter into the epicenter v...The 26 November 2005 Jiujiang-Ruichang, Jiangxi, Ms 5.7 earthquake occurred in a seismotectonic setting of moderate earthquake. The northwest-trending Xiangfan-Guangji fault （XFG） does not enter into the epicenter vicinity, but the northeast-trending Ruichang-Wuning fault （RWF） as a regional fault extends to the epicenter nearby, appearing as the Ruichang basin and its marginal faults. Tilting of the Ruichang Basin （RCB） in the Quaternary was controlled by the RCB southeast- marginal, buried fault （RSMBF）. Shallow geophysical survey reveals that the RSMBF caused an offset of the reflection layers. Drill hole columnar section demonstrates that there are about 10-12 m displacement in the lower section of the middle-Pleistocene Series along the RSMBF, but no disruption is found in the upper section of the middle-Pleistocene Series. The RSMBF not only has activity in the Quaternary, but also coincides with the nodal plane I from the focal mechanism of the Jiujiang- Ruichang Ms 5.7 earthquake. This evidence, including aftershock distribution and isoseismic lines, strongly suggests that the RSMBF might be the seismogenic tectonics. The RWF is discontinuous at the surface, and consists of three en echelon Quaternary basins, which are the Ruichang, Fanzhen and Wuning basins. Three moderate earthquakes, the Fanzhen ML 4.9 earthquake, the Yejiapu ML 4.1 earthquake and the Jiujiang-Ruichang Ms 5.7 earthquake, have happened in the basins since 1995. The seismogenic tectonics of the Jiujiang-Ruichang Ms 5.7 earthquake is not isolated, but may be controlled by the RWF at depth, the slip of which causes the accumulation of energy for earthquake occurrence.展开更多
It has been proven by a number of earthquake case studies that an active fault-induced earthquake beneath a city can be devastating. It is an urgent issue for seismic hazard reduction to explore the distribution of ac...It has been proven by a number of earthquake case studies that an active fault-induced earthquake beneath a city can be devastating. It is an urgent issue for seismic hazard reduction to explore the distribution of active faults beneath the urban area and identify the seismic source and the risks underneath. As a pilot project of active fault exploration in China, the project, entitled “Active fault exploration and seismic hazard assessment in Fuzhou City", started in early 2001 and passed the check before acceptance of China Earthquake Administration in August 2004. The project was aimed to solve a series of scientific issues such as fault location, dating, movement nature, deep settings, seismic risk and hazard, preparedness of earthquake prevention and disaster reduction, and etc. by means of exploration and assessment of active faults by stages, i.e., the preliminary survey and identification of active faults in target area, the exploration of deep seismotectonic settings, the risk evaluation of active seismogenic faults, the construction of geographic information system of active faults, and so on. A lot of exploration methods were employed in the project such as the detection of absorbed mercury, free mercury and radon in soil, the geological radar, multi-channel DC electrical method, tsansient electromagnetic method, shallow seismic refraction and reflection, effect contrast of explored sources, and various sounding experiments, to establish the buried Quaternary standard section of the Fuzhou basin. By summing up, the above explorations and experiments have achieved the following results and conclusions: (1)The results of the synthetic pilot project of active fault exploration in Fuzhou City demonstrate that, on the basis of sufficient collection, sorting out and analysis of geological, geophysical and borehole data, the best method for active fault exploration (location) and seismic risk assessment (dating and characterizing) in urban area is the combination of various approaches, that is, the possible location of active fault determined by using geochemical exploration as a guide “scout", the shallow seismic sounding as the main tool, the electromagnetic method as a supplement, establishing the standard Quaternary profile or stratigraphic sequence from drilling and various geophysical parameters from borehole logs as methods to correct and verify the data above. And in addition, the method also includes the field surveys on fault exposures, trenching, paleoearthquake investigation, dating and comparison of lithology, strata sequence, absolute or relative ages of the cores on the two sides of buried faults. (2)The Fuzhou basin locates under the regional seismotectonic settings which have the potential of moderate earthquake. Comparatively, the region is less affected by the “Taiwan dynamic Antenna"; (3)The activity of the major faults in Fuzhou basin is weak in general. All the six identified target faults are not Holocene faults, among which the Bayi Reservoir-Shanggan fault and the Minhou-Nanyu fault are dormant at least since the mid Epipleistocene time, and the rest are dormant since the Epipleistocene time; (4)In terms of deep-seated structures beneath the basin, there is no evidence indicating the possible occurrence of the underneath strong destructive earthquakes. The adjacent Changle-Zhao’an fault zone is the potential seismic source which may possibly affect Fuzhou City; (5)There exists potential of moderate-strong earthquake on the major faults of the region, but the probability is low; (6)The seismic hazards are weak in the region and the surface earthquake fractures are not likely to occur; (7)The first geographic information system of active faults is developed with functions of information query and display, data management, analysis and processing, etc.展开更多
Field investigation has revealed that the large-scale dextral strike-slip movement and the associated tectonic deformation along the Red River fault zone have the following features: geometrically, the Red River fault...Field investigation has revealed that the large-scale dextral strike-slip movement and the associated tectonic deformation along the Red River fault zone have the following features: geometrically, the Red River fault zone can be divided into three deformation regions, namely, the north, central and south regions. The north region lies on the eastern side of the Northwest Yunnan extensional taphrogenic belt, which is characterized by the 3 sets of rift-depression basins striking NNW, NNE and near N-S since the Pliocene time, and on its western side is the Lanping-Yunlong compressive deformation belt of the Paleogene to Neogene; the deformation in the central region is characterized by dextral strike-slip or shearing. The east Yunnan Miocene compressive deformation belt lies on the eastern side of the fault in the south, and the Tengtiaohe tensile fault depression belt is located on its west. In terms of tectonic geomorphology, the aforementioned deformation is represented by basin-range tectonics in the north, linear faulted valley-basins in the central part and compressive (or tensional) basins in the south. Among them, the great variance in elevation of the planation surfaces on both sides of the Cangshan-Erhai fault suggests prominent normal faulting along the Red River fault since the Pliocene. From the viewpoint of spatial-temporal evolution, the main active portion of the fault was the southern segment in the Paleogene-Miocene-Pliocene, which is represented by “tearing” from south to north. The main active portion of the fault has migrated to the northern segment since the Pliocene, especially in the late Quaternary, which is characterized by extensional slip from north to southeast. The size of the deformation region and the magnitude of deformation show that the eastern plate of the Red River fault has been an active plate of the relative movement of blocks.展开更多
In the epicenter of the Lushan MS7.0 earthquake there are several imbricate active reverse faults lying from northwest to southeast,namely the Gengda-Longdong,Yanjing-Wulong,Shuangshi-Dachuan and Dayi faults.Emergency...In the epicenter of the Lushan MS7.0 earthquake there are several imbricate active reverse faults lying from northwest to southeast,namely the Gengda-Longdong,Yanjing-Wulong,Shuangshi-Dachuan and Dayi faults.Emergency field investigations have indicated that no apparent earthquake surface rupture zones were located along these active faults or their adjacent areas.Only brittle compressive ruptures in the cement-covered pavements can be seen in Shuangshi,Taiping,Longxing and Longmen Townships,and these ruptures show that a local crustal shortening occurred in the region during the earthquake.Combining spatial distribution of the relocated aftershocks and focal mechanism solutions,it is inferred that the Lushan earthquake is classified as a typical blind reverse-fault earthquake,and it is advised that the relevant departments should pay great attention to other historically un-ruptured segments along the Longmenshan thrust belt and throughout its adjacent areas.展开更多
The apparent ages of samples are obtained from fission track dating of apatite samples collected from the fault zones in Mabian area, southern Sichuan Province. In addition, thermal history is simulated from the obtai...The apparent ages of samples are obtained from fission track dating of apatite samples collected from the fault zones in Mabian area, southern Sichuan Province. In addition, thermal history is simulated from the obtained data by applying AFT Solve Program, to acquire the thermal evolution history of the samples. The result shows that tectonically the Mabian area was relatively stable between 25 and 3 Ma, compared to the inner parts and other marginal areas of the Tibetan Plateau. The studied area had little response to the rapid uplift events that occurred for several times in the Tibetan Plateau during 25-3 Ma. The latest thermal event related to the activity of the Lidian fault zone (about 8 Ma ) is later than that of the Ebian fault zone (18-15 Ma ) to the west, indicating to some extent that the evolution of fault activity in the Mabian area has migrated from west to east. The latest extensive tectonic uplift occurred since about 3 Ma. As compared with the Xianshuihe fault zone, the Mabian area is closer to the east- ern margin of the plateau, while the time of fast cooling event in this area is later than that in the southeast segment of the Xianshuihe fault zone (3.6-3.46 Ma ). It appears to support the assumption of episodic uplift and stepwise outward extension of the eastern boundary of the Tibetan Plateau in late Cenozoic.展开更多
The MS6.4 Menyuan earthquake occurred on the northern side of the Lenglongling fault(LLLF) in the mid-western of the Qilian-Haiyuan fault zone on January 21, 2016. The earthquake epicenter was distant from the Minle-D...The MS6.4 Menyuan earthquake occurred on the northern side of the Lenglongling fault(LLLF) in the mid-western of the Qilian-Haiyuan fault zone on January 21, 2016. The earthquake epicenter was distant from the Minle-Damaying and Huangcheng-Shuangta faults, eastern of the Northern Qilian Shan fault zone. A near northwest-striking rupture plane intersects the two faults at a certain angle. The focal mechanism solution shows that this was a thrust-type earthquake, slightly different from the strike-slip movement with a thrust component of the LLLF. Field geological mapping, tectonic geomorphology analysis, trench excavation and 14 C dating reveal that(1) the LLLF has been obviously active since the Holocene, and may behave with characteristic slip behavior and produce M_W7.3–7.5 earthquakes;(2) the LLLF appears as a flower structure in terms of structure style, and dips NNE at a steep angle; and(3) the most recent earthquake event occurred after 1815–1065 a BP. An associated fault, the Northern Lenglongling fault(NLLLF), is located at the northwestern end of the LLLF. Consequently, the NLLLF was continually subject to tectonic pushing effects from the left-lateral shear at the end of the LLLF, and, accordingly, it bent and rotated outward tectonically.Subsequently, the fault deviated from the dominant rupture azimuth and activity weakened. In the late Quaternary, it behaved as a thrust fault with no obvious deformation at the surface. This is indicated by the arc shape, with a micro-protrusion northeastward,and no geologic or geomorphic signs of surface rupturing since the late Quaternary. However, such faults could still rupture at depth, producing moderate-strong earthquakes. The geometric and kinematic properties of the NLLLF are in good agreement with the occurrence and kinematic properties of nodal plane 2, and with the distribution characteristics of the aftershocks and seismic intensity. Therefore, the NLLLF is a more suitable seismogenic structure for the MS 6.4 Menyuan earthquake. In addition, the thrust movement of the NLLLF accommodates subsequent movement of the LLLF. During the historical evolution of the NLLLF,the LLLF and the NLLLF have affected the local topography through tectonic uplift.展开更多
Tectonically, the large-scale right-lateral strike-slip movement along the Red River fault zone is char-acterized at its late phase with the southeastward extension and deformation of the Northwestern Yunnan normal fa...Tectonically, the large-scale right-lateral strike-slip movement along the Red River fault zone is char-acterized at its late phase with the southeastward extension and deformation of the Northwestern Yunnan normal fault depression on its northern segment, and the dextral shear displacement on its central-southern segment. Research of the relations between stratum deformation and fault movement on the typical fault segments, such as Jianchuan, southeast Midu, Yuanjiang River, Yuanyang, etc. since the Miocene Epoch shows that there are two times dextral faulting dominated by normal shearing occurring along the Red River fault zone since the Miocene Epoch. The fission track dating (abbrevi-ated to FT dating, the same below) is conducted on apatite samples collected from the above fault segments and relating to these movements. Based on the measured single grain’s age and the con-fined track length, we choose the Laslet annealing model to retrieve the thermal history of the samples, and the results show that the fault zone experienced two times obvious shear displacement, one in 5.5 ± 1.5 MaBP and the other in 2.1± 0.8 MaBP. The central-southern segment sees two intensive uplifts of mountain mass in the Yuanjiang River-Yuanyang region at 3.6―3.8 MaBP and 1.6―2.3 MaBP, which correspond to the above-mentioned two dextral normal displacement events since the late Miocene Epoch.展开更多
文摘The 26 November 2005 Jiujiang-Ruichang, Jiangxi, Ms 5.7 earthquake occurred in a seismotectonic setting of moderate earthquake. The northwest-trending Xiangfan-Guangji fault （XFG） does not enter into the epicenter vicinity, but the northeast-trending Ruichang-Wuning fault （RWF） as a regional fault extends to the epicenter nearby, appearing as the Ruichang basin and its marginal faults. Tilting of the Ruichang Basin （RCB） in the Quaternary was controlled by the RCB southeast- marginal, buried fault （RSMBF）. Shallow geophysical survey reveals that the RSMBF caused an offset of the reflection layers. Drill hole columnar section demonstrates that there are about 10-12 m displacement in the lower section of the middle-Pleistocene Series along the RSMBF, but no disruption is found in the upper section of the middle-Pleistocene Series. The RSMBF not only has activity in the Quaternary, but also coincides with the nodal plane I from the focal mechanism of the Jiujiang- Ruichang Ms 5.7 earthquake. This evidence, including aftershock distribution and isoseismic lines, strongly suggests that the RSMBF might be the seismogenic tectonics. The RWF is discontinuous at the surface, and consists of three en echelon Quaternary basins, which are the Ruichang, Fanzhen and Wuning basins. Three moderate earthquakes, the Fanzhen ML 4.9 earthquake, the Yejiapu ML 4.1 earthquake and the Jiujiang-Ruichang Ms 5.7 earthquake, have happened in the basins since 1995. The seismogenic tectonics of the Jiujiang-Ruichang Ms 5.7 earthquake is not isolated, but may be controlled by the RWF at depth, the slip of which causes the accumulation of energy for earthquake occurrence.
文摘It has been proven by a number of earthquake case studies that an active fault-induced earthquake beneath a city can be devastating. It is an urgent issue for seismic hazard reduction to explore the distribution of active faults beneath the urban area and identify the seismic source and the risks underneath. As a pilot project of active fault exploration in China, the project, entitled “Active fault exploration and seismic hazard assessment in Fuzhou City", started in early 2001 and passed the check before acceptance of China Earthquake Administration in August 2004. The project was aimed to solve a series of scientific issues such as fault location, dating, movement nature, deep settings, seismic risk and hazard, preparedness of earthquake prevention and disaster reduction, and etc. by means of exploration and assessment of active faults by stages, i.e., the preliminary survey and identification of active faults in target area, the exploration of deep seismotectonic settings, the risk evaluation of active seismogenic faults, the construction of geographic information system of active faults, and so on. A lot of exploration methods were employed in the project such as the detection of absorbed mercury, free mercury and radon in soil, the geological radar, multi-channel DC electrical method, tsansient electromagnetic method, shallow seismic refraction and reflection, effect contrast of explored sources, and various sounding experiments, to establish the buried Quaternary standard section of the Fuzhou basin. By summing up, the above explorations and experiments have achieved the following results and conclusions: (1)The results of the synthetic pilot project of active fault exploration in Fuzhou City demonstrate that, on the basis of sufficient collection, sorting out and analysis of geological, geophysical and borehole data, the best method for active fault exploration (location) and seismic risk assessment (dating and characterizing) in urban area is the combination of various approaches, that is, the possible location of active fault determined by using geochemical exploration as a guide “scout", the shallow seismic sounding as the main tool, the electromagnetic method as a supplement, establishing the standard Quaternary profile or stratigraphic sequence from drilling and various geophysical parameters from borehole logs as methods to correct and verify the data above. And in addition, the method also includes the field surveys on fault exposures, trenching, paleoearthquake investigation, dating and comparison of lithology, strata sequence, absolute or relative ages of the cores on the two sides of buried faults. (2)The Fuzhou basin locates under the regional seismotectonic settings which have the potential of moderate earthquake. Comparatively, the region is less affected by the “Taiwan dynamic Antenna"; (3)The activity of the major faults in Fuzhou basin is weak in general. All the six identified target faults are not Holocene faults, among which the Bayi Reservoir-Shanggan fault and the Minhou-Nanyu fault are dormant at least since the mid Epipleistocene time, and the rest are dormant since the Epipleistocene time; (4)In terms of deep-seated structures beneath the basin, there is no evidence indicating the possible occurrence of the underneath strong destructive earthquakes. The adjacent Changle-Zhao’an fault zone is the potential seismic source which may possibly affect Fuzhou City; (5)There exists potential of moderate-strong earthquake on the major faults of the region, but the probability is low; (6)The seismic hazards are weak in the region and the surface earthquake fractures are not likely to occur; (7)The first geographic information system of active faults is developed with functions of information query and display, data management, analysis and processing, etc.
文摘Field investigation has revealed that the large-scale dextral strike-slip movement and the associated tectonic deformation along the Red River fault zone have the following features: geometrically, the Red River fault zone can be divided into three deformation regions, namely, the north, central and south regions. The north region lies on the eastern side of the Northwest Yunnan extensional taphrogenic belt, which is characterized by the 3 sets of rift-depression basins striking NNW, NNE and near N-S since the Pliocene time, and on its western side is the Lanping-Yunlong compressive deformation belt of the Paleogene to Neogene; the deformation in the central region is characterized by dextral strike-slip or shearing. The east Yunnan Miocene compressive deformation belt lies on the eastern side of the fault in the south, and the Tengtiaohe tensile fault depression belt is located on its west. In terms of tectonic geomorphology, the aforementioned deformation is represented by basin-range tectonics in the north, linear faulted valley-basins in the central part and compressive (or tensional) basins in the south. Among them, the great variance in elevation of the planation surfaces on both sides of the Cangshan-Erhai fault suggests prominent normal faulting along the Red River fault since the Pliocene. From the viewpoint of spatial-temporal evolution, the main active portion of the fault was the southern segment in the Paleogene-Miocene-Pliocene, which is represented by “tearing” from south to north. The main active portion of the fault has migrated to the northern segment since the Pliocene, especially in the late Quaternary, which is characterized by extensional slip from north to southeast. The size of the deformation region and the magnitude of deformation show that the eastern plate of the Red River fault has been an active plate of the relative movement of blocks.
基金supported by the National Natural Science Foundation of China(91214201 and 40821160550)the Special Fund for Scientific Investigation of the Lushan Earthquake
文摘In the epicenter of the Lushan MS7.0 earthquake there are several imbricate active reverse faults lying from northwest to southeast,namely the Gengda-Longdong,Yanjing-Wulong,Shuangshi-Dachuan and Dayi faults.Emergency field investigations have indicated that no apparent earthquake surface rupture zones were located along these active faults or their adjacent areas.Only brittle compressive ruptures in the cement-covered pavements can be seen in Shuangshi,Taiping,Longxing and Longmen Townships,and these ruptures show that a local crustal shortening occurred in the region during the earthquake.Combining spatial distribution of the relocated aftershocks and focal mechanism solutions,it is inferred that the Lushan earthquake is classified as a typical blind reverse-fault earthquake,and it is advised that the relevant departments should pay great attention to other historically un-ruptured segments along the Longmenshan thrust belt and throughout its adjacent areas.
基金the National Basic Research Program of China (No.2004CB418401)
文摘The apparent ages of samples are obtained from fission track dating of apatite samples collected from the fault zones in Mabian area, southern Sichuan Province. In addition, thermal history is simulated from the obtained data by applying AFT Solve Program, to acquire the thermal evolution history of the samples. The result shows that tectonically the Mabian area was relatively stable between 25 and 3 Ma, compared to the inner parts and other marginal areas of the Tibetan Plateau. The studied area had little response to the rapid uplift events that occurred for several times in the Tibetan Plateau during 25-3 Ma. The latest thermal event related to the activity of the Lidian fault zone (about 8 Ma ) is later than that of the Ebian fault zone (18-15 Ma ) to the west, indicating to some extent that the evolution of fault activity in the Mabian area has migrated from west to east. The latest extensive tectonic uplift occurred since about 3 Ma. As compared with the Xianshuihe fault zone, the Mabian area is closer to the east- ern margin of the plateau, while the time of fast cooling event in this area is later than that in the southeast segment of the Xianshuihe fault zone (3.6-3.46 Ma ). It appears to support the assumption of episodic uplift and stepwise outward extension of the eastern boundary of the Tibetan Plateau in late Cenozoic.
基金supported by a Special Project on Earthquake Research, the China Active Fault Survey Project-The South-North Seismic Zone Northern Segment (Grant No. 201408023)Fundamental Research Funds in Institute of Crustal Dynamics, China Earthquake Administration (Grant No. ZDJ2015-16)
文摘The MS6.4 Menyuan earthquake occurred on the northern side of the Lenglongling fault(LLLF) in the mid-western of the Qilian-Haiyuan fault zone on January 21, 2016. The earthquake epicenter was distant from the Minle-Damaying and Huangcheng-Shuangta faults, eastern of the Northern Qilian Shan fault zone. A near northwest-striking rupture plane intersects the two faults at a certain angle. The focal mechanism solution shows that this was a thrust-type earthquake, slightly different from the strike-slip movement with a thrust component of the LLLF. Field geological mapping, tectonic geomorphology analysis, trench excavation and 14 C dating reveal that(1) the LLLF has been obviously active since the Holocene, and may behave with characteristic slip behavior and produce M_W7.3–7.5 earthquakes;(2) the LLLF appears as a flower structure in terms of structure style, and dips NNE at a steep angle; and(3) the most recent earthquake event occurred after 1815–1065 a BP. An associated fault, the Northern Lenglongling fault(NLLLF), is located at the northwestern end of the LLLF. Consequently, the NLLLF was continually subject to tectonic pushing effects from the left-lateral shear at the end of the LLLF, and, accordingly, it bent and rotated outward tectonically.Subsequently, the fault deviated from the dominant rupture azimuth and activity weakened. In the late Quaternary, it behaved as a thrust fault with no obvious deformation at the surface. This is indicated by the arc shape, with a micro-protrusion northeastward,and no geologic or geomorphic signs of surface rupturing since the late Quaternary. However, such faults could still rupture at depth, producing moderate-strong earthquakes. The geometric and kinematic properties of the NLLLF are in good agreement with the occurrence and kinematic properties of nodal plane 2, and with the distribution characteristics of the aftershocks and seismic intensity. Therefore, the NLLLF is a more suitable seismogenic structure for the MS 6.4 Menyuan earthquake. In addition, the thrust movement of the NLLLF accommodates subsequent movement of the LLLF. During the historical evolution of the NLLLF,the LLLF and the NLLLF have affected the local topography through tectonic uplift.
基金the National Natural Science Foundation of China (Grant No.40272087)
文摘Tectonically, the large-scale right-lateral strike-slip movement along the Red River fault zone is char-acterized at its late phase with the southeastward extension and deformation of the Northwestern Yunnan normal fault depression on its northern segment, and the dextral shear displacement on its central-southern segment. Research of the relations between stratum deformation and fault movement on the typical fault segments, such as Jianchuan, southeast Midu, Yuanjiang River, Yuanyang, etc. since the Miocene Epoch shows that there are two times dextral faulting dominated by normal shearing occurring along the Red River fault zone since the Miocene Epoch. The fission track dating (abbrevi-ated to FT dating, the same below) is conducted on apatite samples collected from the above fault segments and relating to these movements. Based on the measured single grain’s age and the con-fined track length, we choose the Laslet annealing model to retrieve the thermal history of the samples, and the results show that the fault zone experienced two times obvious shear displacement, one in 5.5 ± 1.5 MaBP and the other in 2.1± 0.8 MaBP. The central-southern segment sees two intensive uplifts of mountain mass in the Yuanjiang River-Yuanyang region at 3.6―3.8 MaBP and 1.6―2.3 MaBP, which correspond to the above-mentioned two dextral normal displacement events since the late Miocene Epoch.
