Structure and Properties of Gel-spun Ultra-high Molecular Weight Polyethylene Fibers with High Gel Solution Concentration

The gel-spun ultra-high molecular weight polyethylene （UHMWPE） fibers were prepared at the industrial production line with different gel solution concentrations of 15 wt%, 18 wt% and 24 wt%. The difference in ultimate structure and mechanical properties of UHMWPE fibers for different gel solution concentrations were analyzed by tensile testing, differential scanning calorimetry （DSC）, wide angle X-ray diffraction （WAXD） and small angle X-ray scattering （SAXS）. With the increase of gel solution concentration, the ultimate mechanical properties of UHMWPE fibers were decreased and the crystallization and orientation of UHMWPE fibers became inferior. Besides, both the average shish length （ （Lshsh） ） and shish misorientation （B0） of UHMWPE fibers were decreased with the increase of gel solution concentration. In addition, the appropriate increase of spinning temperature led to the further optimization of the ultimate structure and mechanical properties of UHMWPE fibers.

Multiple Endothermic Peaks Resulted from Different Crystal Structures in an Isomorphous Copolymer Poly(3-hydroxybutyrate-co-3-hydroxyvalerate)

The multiple endothermic peaks of poly（3-hydroxybutyrate-co-3-hydroxyvalerate） （P（HB-co-HV）） in differential scanning calorimetry （DSC） results, as one representative phenomenon of polymer with unique cocrystallization behavior, were generally considered as the results of melting/recrystallization. In this study, wide angle X-ray diffraction （WAXD） and small angle X-ray scattering （SAXS） experiments were conducted to analyze the phenomena of multiple endothermic peaks in DSC results. The results of these analyses indicated that the multiple endotherms were mainly caused by different lamellae structures. For P（HB-co-HV） with lower HV content, it was comprised of two structures of HV total exclusion and HV partial inclusion in the crystal lamellae. For P（HB-co-HV） with higher HV content, it was also comprised of two structures of HV total inclusion and HV partial inclusion in the crystal lamellae. However, only structure with HV partial inclusion in the crystal lamellae remained existing after first melting peak for all samples.

The Influence of Chitin Nanocrystals on Structural Evolution of Ultra-high Molecular Weight Polyethylene/Chitin Nanocrystal Fibers in Hot-drawing Process

Ultra-high molecular weight polyethylene（UHMWPE）/chitin nanocrystal（CNC） fibers were prepared. Compared with the pure UHMWPE fibers, the ultimate tensile strength and Young＇s modulus of UHMWPE/CNC fibers are improved by 15.7% and 49.6%, respectively, with the addition of chitin nanocrystals（CNCs） of 1 wt%. The melting temperature（Tm） of UHMWPE/CNC fibers was higher than that of pure UHMWPE fibers. Pure UHMWPE fibers and UHMWPE/CNC fibers were characterized with respect to crystallinity, orientation and kebab structure by wide-angle X-ray diffraction（WAXD）, small-angle X-ray scattering（SAXS） and scanning electron microscopy（SEM）. It is found that the CNCs act as the shish structure in UHMWPE/CNC fibers and the kebab crystals are grown around the CNCs. There was almost no difference between pure UHMWPE fibers and UHMWPE/CNC fibers in orientation. But the degree of crystallinity of various stages of UHMWPE/CNC fibers was respectively higher than the corresponding stage of pure UHMWPE fibers. Moreover, the addition of 1 wt% CNCs improved the thickness of kebab crystals and accelerated the transformation of kebab to shish.

Characterization of Structural Knot Distributions in UHMWPE Fibers

Microbeam wide-angle X-ray diffraction（WAXD） experiments were carried out at different structural knot positions of SIOC and M4 fibers of ultra-high molecular weight polyethylene（UHMWPE）. The optical microscope images revealed that SIOC fiber had bamboo-like structural knots, and M4 fiber had chaotic distribution of structural knots. WAXD patterns showed the monoclinic unit cell in the whole M4 fiber, but different lamellar orientations in the bamboo joint of SIOC fiber. In addition, small-angle X-ray scattering（SAXS） patterns confirmed that the SIOC fiber contained uniform distribution of shish structures, and differential scanning calorimetry（DSC） measurements showed that its less branched and short chains benefited the orthorhombic-hexagonal phase transformation.