This work investigated the pore structure characteristics and reservoir features of the finegrained tight reservoirs in the lower member of the Xinhe Formation(J2x1) in the Xiaohu subsag,Yabulai Basin based on core sa...This work investigated the pore structure characteristics and reservoir features of the finegrained tight reservoirs in the lower member of the Xinhe Formation(J2x1) in the Xiaohu subsag,Yabulai Basin based on core samples through various techniques. Interbedded silt/fine sandstones and mudstones are developed in the study area. Scanning electron microscopy(SEM) images were used to delineate different types of pores, including primary intergranular pores, secondary intergranular and intragranular pores, organic pores and fractures. The pore types were distinguished by pore size, pore area, location and formation process. The pore radii of the fine-grained rocks range from 1 nm to 1.55μm, mainly concentrated between 5 and 300 nm by low pressure N2adsorption and MICP analyses. The pore structure parameters of pore throat size and pore throat sorting coefficient are both positively correlated with porosity, while pore throat sorting coefficient has a negative correlation with permeability. The pore structures of the studied samples are much related to the mineral type and content and grain size, followed by TOC content. In these rocks with relatively low TOC and low maturity, the rigid minerals protect pores with pressure shadow from collapse, and dissolution-related pores contribute a lot to inorganic porosity. In contrast, these rocks with abundant TOC contain a large number of organic pores. The permeability of the fine-grained tight reservoir is mainly dominated by larger pore throats, while a large number of small pores(mostly <0.1 μm) contribute considerably to porosity. These results have deepened our understanding of the interbedded fine-grained tight reservoirs and can be applicable to fine-grained reservoirs in a similar setting.展开更多
Sedimentary basins containing igneous intrusions within sedimentary reservoir units represent an important risk in petroleum exploration. The Upper Triassic to Lower Jurassic sediments at Wilhelm?ya(Svalbard) contains...Sedimentary basins containing igneous intrusions within sedimentary reservoir units represent an important risk in petroleum exploration. The Upper Triassic to Lower Jurassic sediments at Wilhelm?ya(Svalbard) contains reservoir heterogeneity as a result of sill emplacement and represent a unique case study to better understand the effect of magmatic intrusions on the general burial diagenesis of siliciclastic sediments. Sills develop contact metamorphic aureoles by conduction as presented in many earlier studies. However, there is significant impact of localized hydrothermal circulation systems affecting reservoir sediments at considerable distance from the sill intrusions. Dolerite sill intrusions in the studied area are of limited vertical extent(~12 m thick), but created localized hydrothermal convection cells affecting sediments at considerable distance(more than five times the thickness of the sill)from the intrusions. We present evidence that the sedimentary sequence can be divided into two units:(1) the bulk poorly lithified sediment with a maximum burial temperature much lower than 60-70 ℃,and(2) thinner intervals outside the contact zone that have experienced hydrothermal temperatures(around 140 ℃). The main diagenetic alteration associated with normal burial diagenesis is minor mechanical plastic deformation of ductile grains such as mica. Mineral grain contacts show no evidence of pressure dissolution and the vitrinite reflectance suggests a maximum temperature of ~40 ℃. Contrary to this, part of the sediment, preferentially along calcite cemented flow baffles, show evidence of hydrothermal alteration. These hydrothermally altered sediment sections are characterized by recrystallized carbonate cemented intervals. Further, the hydrothermal solutions have resulted in localized sericitization(illitization) of feldspars, albitization of both K-feldspar and plagioclase and the formation of fibrous illite nucleated on kaolinite. These observations suggest hydrothermal alteration at T> 120-140 ℃ at distances considerably further away than expected from sill heat dissipation by conduction only, which commonly affect sediments about twice the thickness of the sill intrusion. We propose that carbonate-cemented sections acted as flow baffles already during the hydrothermal fluid mobility and controlled the migration pathways of the buoyant hot fluids. Significant hydrothermally induced diagenetic alterations affecting the porosity and hence reservoir quality was not noted in the noncarbonate-cemented reservoir intervals.展开更多
基金financially supported by the National Natural Science Foundation of China (grant No. U1762217)the State Key Development Program for Basic Research of China (grant No. 2014CB239002)+1 种基金the National Science and Technology Special Grant (grant No. 2016ZX05006-007)the Fundamental Research Funds for the Central Universities (grant No. 15CX06009A)
文摘This work investigated the pore structure characteristics and reservoir features of the finegrained tight reservoirs in the lower member of the Xinhe Formation(J2x1) in the Xiaohu subsag,Yabulai Basin based on core samples through various techniques. Interbedded silt/fine sandstones and mudstones are developed in the study area. Scanning electron microscopy(SEM) images were used to delineate different types of pores, including primary intergranular pores, secondary intergranular and intragranular pores, organic pores and fractures. The pore types were distinguished by pore size, pore area, location and formation process. The pore radii of the fine-grained rocks range from 1 nm to 1.55μm, mainly concentrated between 5 and 300 nm by low pressure N2adsorption and MICP analyses. The pore structure parameters of pore throat size and pore throat sorting coefficient are both positively correlated with porosity, while pore throat sorting coefficient has a negative correlation with permeability. The pore structures of the studied samples are much related to the mineral type and content and grain size, followed by TOC content. In these rocks with relatively low TOC and low maturity, the rigid minerals protect pores with pressure shadow from collapse, and dissolution-related pores contribute a lot to inorganic porosity. In contrast, these rocks with abundant TOC contain a large number of organic pores. The permeability of the fine-grained tight reservoir is mainly dominated by larger pore throats, while a large number of small pores(mostly <0.1 μm) contribute considerably to porosity. These results have deepened our understanding of the interbedded fine-grained tight reservoirs and can be applicable to fine-grained reservoirs in a similar setting.
基金(partially)funded by the project"Recon-structing the Triassic Northern Barents shelfbasin inill patternscontrolled by gentle sags and faults"(Trias North-www.mn.uio.no/triasnorth/)under grant 234152 from the Research Council of Nor-waywith financial support from Tullow Oil Norge,LundinNorway,Statoil Petroleum,Edison Norge and RWE Dea Norge
文摘Sedimentary basins containing igneous intrusions within sedimentary reservoir units represent an important risk in petroleum exploration. The Upper Triassic to Lower Jurassic sediments at Wilhelm?ya(Svalbard) contains reservoir heterogeneity as a result of sill emplacement and represent a unique case study to better understand the effect of magmatic intrusions on the general burial diagenesis of siliciclastic sediments. Sills develop contact metamorphic aureoles by conduction as presented in many earlier studies. However, there is significant impact of localized hydrothermal circulation systems affecting reservoir sediments at considerable distance from the sill intrusions. Dolerite sill intrusions in the studied area are of limited vertical extent(~12 m thick), but created localized hydrothermal convection cells affecting sediments at considerable distance(more than five times the thickness of the sill)from the intrusions. We present evidence that the sedimentary sequence can be divided into two units:(1) the bulk poorly lithified sediment with a maximum burial temperature much lower than 60-70 ℃,and(2) thinner intervals outside the contact zone that have experienced hydrothermal temperatures(around 140 ℃). The main diagenetic alteration associated with normal burial diagenesis is minor mechanical plastic deformation of ductile grains such as mica. Mineral grain contacts show no evidence of pressure dissolution and the vitrinite reflectance suggests a maximum temperature of ~40 ℃. Contrary to this, part of the sediment, preferentially along calcite cemented flow baffles, show evidence of hydrothermal alteration. These hydrothermally altered sediment sections are characterized by recrystallized carbonate cemented intervals. Further, the hydrothermal solutions have resulted in localized sericitization(illitization) of feldspars, albitization of both K-feldspar and plagioclase and the formation of fibrous illite nucleated on kaolinite. These observations suggest hydrothermal alteration at T> 120-140 ℃ at distances considerably further away than expected from sill heat dissipation by conduction only, which commonly affect sediments about twice the thickness of the sill intrusion. We propose that carbonate-cemented sections acted as flow baffles already during the hydrothermal fluid mobility and controlled the migration pathways of the buoyant hot fluids. Significant hydrothermally induced diagenetic alterations affecting the porosity and hence reservoir quality was not noted in the noncarbonate-cemented reservoir intervals.