The carbon materials as anode electrodes have been widely studied for potassium ion batteries(PIBs).However,the large size of potassium ions prevents their intercalation/deintercalation,resulting in poor storage behav...The carbon materials as anode electrodes have been widely studied for potassium ion batteries(PIBs).However,the large size of potassium ions prevents their intercalation/deintercalation,resulting in poor storage behaviors.Herein,a novel design of N/S codoped hierarchical carbonaceous fibers(NSHCF)formed from nanosheets self-assembled by catalyzing Aspergillus niger with Sn is reported.The asprepared NSHCF at 600℃(NSHCF-600)exhibits a high reversible capacity of 345.4 m Ah g^(-1) at 0.1 A g^(-1) after 100 cycles and an excellent rate performance of 124.5 m Ah g^(-1) at 2 A g^(-1).The excellent potassium storage performance can be ascribed to the N/S dual-doping,which enlarges interlayer spacing(0.404 nm)and introduces more defects.The larger interlayer spacing and higher pyridinic N active sites can promote K ions diffusion and storage.In addition,the ex situ transmission electron microscopy reveals the high reversibility of potassiation/depotassiation process and structural stability.展开更多
In this work,an amorphous ZnO was coated on LiNi_(0.6)Co_(0.2)Mn_(0.2)O_(2)(NCM)using a sol-gel strategy method.The NCM coated with 1 wt.%Zn O and a thickness of about 3 nm exhibits an improved cycling performance,acc...In this work,an amorphous ZnO was coated on LiNi_(0.6)Co_(0.2)Mn_(0.2)O_(2)(NCM)using a sol-gel strategy method.The NCM coated with 1 wt.%Zn O and a thickness of about 3 nm exhibits an improved cycling performance,accompanied by a lower capacity fading(from 194.8 to 133.8 m Ah g^(-1),i.e.,68%)than that of the pristine one(i.e.,only 34%)after 300 cycles at 0.2 C.The cyclic voltammetry(CV)and electrochemical impedance spectroscopy(EIS)indicate that the Zn O coating can improve extraction/insertion of Li+and inhibit the increase in impedance of the NCM cathode material.This approach may benefit the performance improvement of the Ni-rich cathode materials in Lithium-ion batteries(LIBs).展开更多
To address the capacity degradation,voltage fading,structural instability and adverse interface reactions in cathode materi-als of lithium-ion batteries(LIBs),numerous modification strategies have been developed,mainl...To address the capacity degradation,voltage fading,structural instability and adverse interface reactions in cathode materi-als of lithium-ion batteries(LIBs),numerous modification strategies have been developed,mainly including coating and doping.In particular,the important strategy of doping(surface doping and bulk doping)has been considered an effective strategy to modulate the crystal lattice structure of cathode materials.However,special insights into the mechanisms and effectiveness of the doping strategy,especially comparisons between surface doping and bulk doping in cathode materials,are still lacking.In this review,recent significant progress in surface doping and bulk doping strategies is demonstrated in detail by focusing on their inherent differences as well as effects on the structural stability,lithium-ion(Li-ion)diffusion and electrochemical properties of cathode materials from the following mechanistic insights:preventing the exposure of reactive Ni on the surface,stabilizing the Li slabs,mitigating the migration of transition metal(TM)ions,alleviating unde-sired structural transformations and adverse interface issues,enlarging the Li interslab spacing,forming three-dimensional(3D)Li-ion diffusion channels,and providing more active sites for the charge-transfer process.Moreover,insights into the correlation between the mechanisms of hybrid surface engineering strategies(doping and coating)and their influences on the electrochemical performance of cathode materials are provided by emphasizing the stabilization of the Li slabs,the enhancement of the surface chemical stability,and the alleviation of TM ion migration.Furthermore,the existing challenges and future perspectives in this promising field are indicated.展开更多
基金financial support from the National Natural Science Foundation of China(NSFC Grant No.21571080)the Project 2019JLP-04 supported by Joint Foundation of ShaanxiXi’an Science and Technology Project of China(201805037YD15CG21(20))。
文摘The carbon materials as anode electrodes have been widely studied for potassium ion batteries(PIBs).However,the large size of potassium ions prevents their intercalation/deintercalation,resulting in poor storage behaviors.Herein,a novel design of N/S codoped hierarchical carbonaceous fibers(NSHCF)formed from nanosheets self-assembled by catalyzing Aspergillus niger with Sn is reported.The asprepared NSHCF at 600℃(NSHCF-600)exhibits a high reversible capacity of 345.4 m Ah g^(-1) at 0.1 A g^(-1) after 100 cycles and an excellent rate performance of 124.5 m Ah g^(-1) at 2 A g^(-1).The excellent potassium storage performance can be ascribed to the N/S dual-doping,which enlarges interlayer spacing(0.404 nm)and introduces more defects.The larger interlayer spacing and higher pyridinic N active sites can promote K ions diffusion and storage.In addition,the ex situ transmission electron microscopy reveals the high reversibility of potassiation/depotassiation process and structural stability.
基金supported by the Natural Science Basic Research Plan in Shaanxi Province of China(2019JLP-04)the National Natural Science Foundation of China(51672189)+1 种基金Xi’an Science and Technology Project of China(201805037YD15CG21(20))Tianjin Science and Technology Project(18PTZWHZ00020)
文摘In this work,an amorphous ZnO was coated on LiNi_(0.6)Co_(0.2)Mn_(0.2)O_(2)(NCM)using a sol-gel strategy method.The NCM coated with 1 wt.%Zn O and a thickness of about 3 nm exhibits an improved cycling performance,accompanied by a lower capacity fading(from 194.8 to 133.8 m Ah g^(-1),i.e.,68%)than that of the pristine one(i.e.,only 34%)after 300 cycles at 0.2 C.The cyclic voltammetry(CV)and electrochemical impedance spectroscopy(EIS)indicate that the Zn O coating can improve extraction/insertion of Li+and inhibit the increase in impedance of the NCM cathode material.This approach may benefit the performance improvement of the Ni-rich cathode materials in Lithium-ion batteries(LIBs).
基金the National Natural Science Foundation of China(52072298 and 51802261)the Local Special Service Program Funded by Education Department of Shaanxi Provincial Government(19JC031)+2 种基金the Natural Science Foundation of Shaanxi(2020JC-41,2021TD-15)the Xi’an Science and Technology Project of China(2019219714SYS012CG034)the Project 2019JLP-04 supported by the Joint Foundation of Shaanxi.
文摘To address the capacity degradation,voltage fading,structural instability and adverse interface reactions in cathode materi-als of lithium-ion batteries(LIBs),numerous modification strategies have been developed,mainly including coating and doping.In particular,the important strategy of doping(surface doping and bulk doping)has been considered an effective strategy to modulate the crystal lattice structure of cathode materials.However,special insights into the mechanisms and effectiveness of the doping strategy,especially comparisons between surface doping and bulk doping in cathode materials,are still lacking.In this review,recent significant progress in surface doping and bulk doping strategies is demonstrated in detail by focusing on their inherent differences as well as effects on the structural stability,lithium-ion(Li-ion)diffusion and electrochemical properties of cathode materials from the following mechanistic insights:preventing the exposure of reactive Ni on the surface,stabilizing the Li slabs,mitigating the migration of transition metal(TM)ions,alleviating unde-sired structural transformations and adverse interface issues,enlarging the Li interslab spacing,forming three-dimensional(3D)Li-ion diffusion channels,and providing more active sites for the charge-transfer process.Moreover,insights into the correlation between the mechanisms of hybrid surface engineering strategies(doping and coating)and their influences on the electrochemical performance of cathode materials are provided by emphasizing the stabilization of the Li slabs,the enhancement of the surface chemical stability,and the alleviation of TM ion migration.Furthermore,the existing challenges and future perspectives in this promising field are indicated.