The Philippine Sea is the largest marginal sea in the Western Pacific Ocean and is divided into two parts by the Kyushu-Palau Ridge(KPR).The western part is the West Philippine Basin,and the eastern part consists of t...The Philippine Sea is the largest marginal sea in the Western Pacific Ocean and is divided into two parts by the Kyushu-Palau Ridge(KPR).The western part is the West Philippine Basin,and the eastern part consists of the Shikoku and Parece Vela basins.Based on surveyed data of massive high-resolution multibeam bathymetric data and sub-bottom profiles data collected from the southern section of the KPR from 2018 to 2021,this paper analyzes the topographic and geomorphological features,shallow sedimentary features,and tectonic genesis of the southern section of the KPR,obtaining the following conclusions.The southern section of the KPR has complex and rugged topography,with positive and negative topography alternatingly distributed and a maximum height difference of 4086 m.The slope of seamounts in this section generally exceeds 10°and is up to a maximum of 59°.All these contribute noticeably discontinuous topography.There are primarily nine geomorphological types in the southern section of the KPR,including seamounts,ridges,and intermontane valleys,etc.Among them,seven independent seamount groups are divided by five large troughs,forming an overall geomorphological pattern of seven abyssal seamount groups and five troughs.This reflects the geomorphological features of a deep oceanic ridge.Intramontane basins and intermontane valleys in the southern section of the KPR are covered by evenly thick sediments.In contrast,sediments in ridges and seamounts in this section are thin or even missing,with slumps developing locally.Therefore,the sediments are discontinuous and unevenly developed.The KPR formed under the control of tectonism such as volcanic activities and plate movements.In addition,exogenic forces such as underflow scouring and sedimentation also play a certain role in shaping seafloor landforms in the KPR.展开更多
High-cost pre-alloyed powder is the bottleneck problem that limits the widespread application of additivemanufactured shape memory alloys.In this work,the lowcost ternary NiTiFe shape memory alloy is fabricated by las...High-cost pre-alloyed powder is the bottleneck problem that limits the widespread application of additivemanufactured shape memory alloys.In this work,the lowcost ternary NiTiFe shape memory alloy is fabricated by laser powder bed fusion(LPBF)technique via mechanically mixed pre-alloy NiTi powder and varying contents pure Fe powder(1,2,3 wt%).All NiTiFe alloys show a relative density of up to 99.8%by optimizing the LPBF processing parameters.Owing to the heterogeneous nucleation effect of micron-sized Fe particles,both grain refinement and texture weakening are generated in the NiTiFe alloys,accompanied by the reduction of dislocation density.For the room-temperature mechanical properties,the NiTi-3Fe alloy shows the highest microhardness of HV370,but the fracture strength and elongation reduce to1701 MPa and 23%simultaneously.The evolution of mechanical properties is attributed to the high internal defects,low dislocation density and the incoherent oxide.Moreover,the NiTi-3Fe alloy shows the quasi-linear superelasticity behavior;the superelastic recoverable strain of NiTi-1Fe and NiTi-2Fe decreased with the increase in Fe content.This study provided a new-fangled insight for the development of multi-component NiTi-based shape memory alloys by additive manufacturing.展开更多
In this paper, we report a rapid synthesis of piezoelectric ZnO-nanostructures and fabrication of the nanostructures- based power-generators demonstrating an energy conversion from an environmental mechanical/ultrason...In this paper, we report a rapid synthesis of piezoelectric ZnO-nanostructures and fabrication of the nanostructures- based power-generators demonstrating an energy conversion from an environmental mechanical/ultrasonic energy to an electrical energy. The ZnO nanostructures are grown on a silicon wafer by a modified chemical solution method (CSD, chemical-solution-deposition) with a two-step thermal-oxidation approach. The synthesis process can be completed within 1 h. By varying the mixture-ratio of Zn micro-particles in an oxalic acid solution with 0.75 mol/l concentration in the CSD process, the growth mechanism is well-controlled to synthesize three different types of ZnO-nanostructures (i.e., dandelion-like nanostructures, columnar nanostructures, and nanowires). Furthermore, through oxidizing at different temperatures in the thermal-oxidation process, the featured geometry of the nanostructures (e.g., the length and diameter of a nanowire) is modified. The geometry, size, morphology, crystallization, and material phase of the modified nanostructures are characterized by scanning electron microscopy and X-ray diffraction. Finally, the nanostructures are used to fabricate several micro power-generators. Through the piezoelectric effect, a maximum current density output of 0.28 μA cm-2 generated by a power-generator under an ultrasonic wave is observed.展开更多
基金This paper is funded by the National Special Program of China Geological Survey(DD20191002,DD20191003)。
文摘The Philippine Sea is the largest marginal sea in the Western Pacific Ocean and is divided into two parts by the Kyushu-Palau Ridge(KPR).The western part is the West Philippine Basin,and the eastern part consists of the Shikoku and Parece Vela basins.Based on surveyed data of massive high-resolution multibeam bathymetric data and sub-bottom profiles data collected from the southern section of the KPR from 2018 to 2021,this paper analyzes the topographic and geomorphological features,shallow sedimentary features,and tectonic genesis of the southern section of the KPR,obtaining the following conclusions.The southern section of the KPR has complex and rugged topography,with positive and negative topography alternatingly distributed and a maximum height difference of 4086 m.The slope of seamounts in this section generally exceeds 10°and is up to a maximum of 59°.All these contribute noticeably discontinuous topography.There are primarily nine geomorphological types in the southern section of the KPR,including seamounts,ridges,and intermontane valleys,etc.Among them,seven independent seamount groups are divided by five large troughs,forming an overall geomorphological pattern of seven abyssal seamount groups and five troughs.This reflects the geomorphological features of a deep oceanic ridge.Intramontane basins and intermontane valleys in the southern section of the KPR are covered by evenly thick sediments.In contrast,sediments in ridges and seamounts in this section are thin or even missing,with slumps developing locally.Therefore,the sediments are discontinuous and unevenly developed.The KPR formed under the control of tectonism such as volcanic activities and plate movements.In addition,exogenic forces such as underflow scouring and sedimentation also play a certain role in shaping seafloor landforms in the KPR.
基金financially supported by the National Natural Science Foundation of China(No.52201225)the Post-doctoral Foundation Project of Shenzhen Polytechnic(No.6021330013K0)+4 种基金the Additive Manufacturing Technology R&D Center(No.602331004PQ)Guangdong Provincial General University Innovation Team Project(No.2020KCXTD047)Shenzhen ScienceandTechnologyInnovationCommission(No.JSGG20200701095008016)Shenzhen Science and Technology Program(No.RCBS20221008093241051)the Natural Science Foundation of Guangdong Province(No.2022A1515110389)。
文摘High-cost pre-alloyed powder is the bottleneck problem that limits the widespread application of additivemanufactured shape memory alloys.In this work,the lowcost ternary NiTiFe shape memory alloy is fabricated by laser powder bed fusion(LPBF)technique via mechanically mixed pre-alloy NiTi powder and varying contents pure Fe powder(1,2,3 wt%).All NiTiFe alloys show a relative density of up to 99.8%by optimizing the LPBF processing parameters.Owing to the heterogeneous nucleation effect of micron-sized Fe particles,both grain refinement and texture weakening are generated in the NiTiFe alloys,accompanied by the reduction of dislocation density.For the room-temperature mechanical properties,the NiTi-3Fe alloy shows the highest microhardness of HV370,but the fracture strength and elongation reduce to1701 MPa and 23%simultaneously.The evolution of mechanical properties is attributed to the high internal defects,low dislocation density and the incoherent oxide.Moreover,the NiTi-3Fe alloy shows the quasi-linear superelasticity behavior;the superelastic recoverable strain of NiTi-1Fe and NiTi-2Fe decreased with the increase in Fe content.This study provided a new-fangled insight for the development of multi-component NiTi-based shape memory alloys by additive manufacturing.
基金the National Science Council of the Republic of China,Taiwan,for fnancially supporting this research under Contract No.NSC 101-2218-E-539001 and NSC 102-2623-E-539-001-ET
文摘In this paper, we report a rapid synthesis of piezoelectric ZnO-nanostructures and fabrication of the nanostructures- based power-generators demonstrating an energy conversion from an environmental mechanical/ultrasonic energy to an electrical energy. The ZnO nanostructures are grown on a silicon wafer by a modified chemical solution method (CSD, chemical-solution-deposition) with a two-step thermal-oxidation approach. The synthesis process can be completed within 1 h. By varying the mixture-ratio of Zn micro-particles in an oxalic acid solution with 0.75 mol/l concentration in the CSD process, the growth mechanism is well-controlled to synthesize three different types of ZnO-nanostructures (i.e., dandelion-like nanostructures, columnar nanostructures, and nanowires). Furthermore, through oxidizing at different temperatures in the thermal-oxidation process, the featured geometry of the nanostructures (e.g., the length and diameter of a nanowire) is modified. The geometry, size, morphology, crystallization, and material phase of the modified nanostructures are characterized by scanning electron microscopy and X-ray diffraction. Finally, the nanostructures are used to fabricate several micro power-generators. Through the piezoelectric effect, a maximum current density output of 0.28 μA cm-2 generated by a power-generator under an ultrasonic wave is observed.