Deterministic remote preparation of multi-qubit equatorial states through dissipative channels

We investigate the influence of a noisy environment on the remote preparation of the multi-qubit equatorial state, and specifically deduce the final states and fidelities of the remote preparation of the three-qubit and four-qubit equatorial states under diverse types of noisy environments, namely, amplitude damping, bit flip, phase damping, phase flip, bit-phase flip,depolarization, and non-Markov environments. The results show that when the decoherence factors of the front six noises are equal, the influence degrees of phase damped noise, bit flip noise, phase flip noise, and bit-phase flip noise are similar,while the information loss caused by the amplitude damped noise and depolarizing noise is less. In particular, the bit flip noise and depolarizing noise may have more complex effects on the remote state preparation(RSP) schemes depending on the phase information of the target states, even for the ideal cases where the fidelity values are always 1 for specific phase relations. In the non-Markov environment, owing to the back and forth of information between the environment and systems, fidelities exhibit oscillating behavior and the minimum value may stay greater than zero for a long evolutionary time. These results are expected to have potential applications for understanding and avoiding the influence of noise on remote quantum communication and quantum networks.

Error-detected single-photon quantum routing using a quantum dot and a double-sided microcavity system

Based on a hybrid system consisting of a quantum dot coupled with a double-sided micropillar cavity, we investigate the implementation of an error-detected photonic quantum routing controlled by the other photon. The computational errors from unexpected experimental imperfections are heralded by single photon detections, resulting in a unit fidelity for the present scheme, so that this scheme is intrinsically robust. We discuss the performance of the scheme with currently achievable experimental parameters. Our results show that the present scheme is efficient. Furthermore, our scheme could provide a promising building block for quantum networks and distributed quantum information processing in the future.

A quasi-isentropic model of a cylinder driven by aluminized explosives based on characteristic line analysis

A quasi-isentropic study on the process of driving a cylinder with aluminized explosives was carried out to examine the influence of the aluminum(Al) reaction rate on cylinder expansion and the physical parameters of the detonation products. Based on the proposed quasi-isentropic hypothesis and relevant isentropic theories, the characteristic lines of aluminized explosives driving a cylinder were analyzed,and a quasi-isentropic model was established. This model includes the variation of the cylinder wall velocity and the physical parameters of the detonation products with the Al reaction degree. Using previously reported experimental results, the quasi-isentropic model was verified to be applicative and accurate. This model was used to calculate the physical parameters for cylinder experiments with aluminized cyclotrimethylenetrinitramine explosives with 15.0 % and 30.0 % Al content. The results show that this quasi-isentropic model can be used not only to calculate the cylinder expansion rule or Al reaction degree, but also to calculate the physical parameters of the detonation products in the process of cylinder expansion. For explosives with 15.0 % and 30.0 % Al, 24.3 % and 18.5 % of the Al was found to have reacted at 33.9 μs and 34.0 μs, respectively. The difference in Al content results in different reaction intensity, occurrence time, and duration of two forms of reaction(diffusion and kinetic) between the Al powder and the detonation products;the post-detonation burning reaction between the Al powder and the detonation products prolongs the positive pressure action time, resulting in a continuous rise in temperature after detonation.

Change-over switch for quantum states transfer with topological channels in a circuit-QED lattice

We propose schemes to realize robust quantum states transfer between distant resonators using the topological edge states of a one-dimensional circuit quantum electrodynamics(QED)lattice.Analyses show that the distribution of edge states can be regulated accordingly with the on-site defects added on the resonators.And we can achieve different types of quantum state transfer without adjusting the number of lattices.Numerical simulations demonstrate that the on-site defects can be used as a change-over switch for high-fidelity single-qubit and two-qubit quantum states transfer.This work provides a viable prospect for flexible quantum state transfer in solid-state topological quantum system.

Direct measurement of two-qubit phononic entangled states via optomechanical interactions

We propose schemes of direct concurrence measurement for two-qubit phononic states from quantized mechanical vibration. By combining the Mach–Zehnder interferometer with the optomechanical cross-Kerr nonlinear effect, direct concurrence measurement schemes for two-qubit phononic entangled states are achieved with the help of photon detection with respect to the output of the interferometer. For different types of entangled states, diversified quantum devices and operations are designed accordingly. The final analysis shows reasonable performance under the current parameter conditions.Our schemes may be useful for potential phonon-based quantum computation and information in the future.

Nonreciprocal photon blockade in a spinning resonator coupled to two two-level atoms

We propose a scheme to simultaneously achieve nonreciprocal conventional photon blockade(NCPB) and unconventional photon blockade(NUPB) in a spinning resonator coupled to two two-level atoms. We show that, with the unequal frequency detuning of cavity and atoms from the driving laser, the quantum efect of the nonreciprocal photon blockade can be realized based on two regimes under diferent driving strengths. We confirm that, the NUPB results from the quantum destructive interference between distinct pathways when the driving laser is loaded from one side, whereas the destructive interference is broken when the system is driven from the other side. Moreover, the NCPB originates from whether the single excitation resonance condition is satisfied, corresponding to the opposite driving direction in contrast to the former. Besides, we obtain the optimal nonreciprocal results by appropriately choosing the system parameters. Interestingly, the UPB exhibits stronger robustness to thermal noises,and the nonreciprocity still exists up to a high thermal excitation. This work provides an alternative way to achieve nonreciprocal quantum devices based on the nonreciprocal photon blockade, which may help to develop information network processing.

Qubit-assisted squeezing of mirror motion in a dissipative cavity optomechanical system

In this study, we investigate a hybrid system consisting of an atomic ensemble trapped inside a dissipative optomechanical cavity assisted with perturbative oscillator-qubit coupling. Such a system is generally very suitable for generating stationary squeezing of the mirror motion in the long-time limit under the unresolved sideband regime. Based on the master equation and covariance matrix approaches, we discuss in detail the respective squeezing effects. We also determine that in both approaches, simplifying the system dynamics with adiabatic elimination of the highly dissipative cavity mode is very effective. In the master equation approach, we find that the squeezing is a resulting effect of the cooling process and is robust against thermal fluctuations of the mechanical mode. In the covariance matrix approach, we can approximately obtain the analytical result of the steady-state mechanical position variance from the reduced dynamical equation. Finally, we compare the two approaches and observe that they are completely equivalent for the stationary dynamics. Moreover, the scheme may be useful for possible ultraprecise quantum measurement that involves mechanical squeezing.

Engineering of strong mechanical squeezing via the joint effect between Duffing nonlinearity and parametric pump driving

Previous works for achieving mechanical squeezing focused mainly on the sole squeezing manipulation method.Here we study how to construct strong steady-state mechanical squeezing via the joint effect between Duffing nonlinearity and parametric pump driving. We find that the 3 d B limit of strong mechanical squeezing can be easily overcome from the joint effect of two different below 3 d B squeezing components induced by Duffing nonlinearity and parametric pump driving, respectively, without the need of any extra technologies, such as quantum measurement or quantum feedback. We first demonstrate that, in the ideal mechanical bath, the joint squeezing effect just is the superposition of the two respective independent squeezing components. The mechanical squeezing constructed by the joint effect is fairly robust against the mechanical thermal noise. Moreover, different from previous mechanical squeezing detection schemes, which need to introduce an additional ancillary cavity mode, the joint mechanical squeezing effect in the present scheme can be directly measured by homodyning the output field of the cavity with an appropriate phase. The joint idea opens up a new approach to construct strong mechanical squeezing and can be generalized to realize other strong macroscopic quantum effects.

Dissipation-induced topological phase transition and periodic-driving-induced photonic topological state transfer in a small optomechanical lattice

We propose a scheme to investigate the topological phase transition and the topological state transfer based on the small optomechanical lattice under the realistic parameters regime.We find that the optomechanical lattice can be equivalent to a topologically nontrivial Su-Schrieffer Heeger(SSH)model via designing the effective optomechanical coupling.Especially,the optomechanical lattice experiences the phase transition between topologically nontrivial SSH phase and topologically trivial SSH phase by controlling the decay of the cavity field and the opto mechanical coupling.We stress that the to pological phase transition is mainly induced by the decay of the cavity field,which is counter-intuitive since the dissipation is usually detrimental to the system.Also,we investigate the photonic state transfer between the two cavity fields via the topologically protected edge channel based on the small optomechanical lattice.We find that the quantum st ate transfer assisted by the topological zero energy mode can be achieved via implying the external lasers with the periodical driving amplitudes into the cavity fields.Our scheme provides the fundamental and the insightful explanations towards the mapping of the photonic topological insulator based on the micro-nano optomechanical quantum optical platform.

Engineering multipartite steady entanglement of distant atoms via dissipation

We propose a scheme for generating an entangled state for three atoms trapped in separate optical cavities that are coupled to each other through two optical fibers based on coherent driving and dissi- pation, which are induced by the classical fields and the decay of non-local bosonic modes, respectively. In our scheme, the interaction time need not be controlled strictly in the overall dynamics process, and the cavity field decay can be changed into a vital resource. The numerical simulation shows that the fidelity of the target state is insensitive to atomic spontaneous emission, and our scheme is good enough to generate the W state of distant atoms with a high fidelity and purity. In addition, the present scheme can also be generalized to prepare the N-partite W state of distant atoms.

Simulation and detection of the topological properties of a modulated Rice-Mele model in a one-dimensional circuit-QED lattice

Here, we propose a simple scheme to realize a one-dimensional(1 D) modulated Rice-Mele model(RMM) and investigate its topological properties with a 1 D circuit quantum electrodynamics(QED) lattice. The system can be mapped into a Chern insulator model by introducing a period parameter. Interestingly and surprisingly, we found that the circuit-QED lattice system always exhibits topologically nontrivial phases if both the nearest-neighbor hopping strength between two resonators and the qubitassisted on-site potentials are alternately changed in the direction of the lattice. The numerical results show that the topological phases can be obtained by introducing an additional modulation parameter and both the edge state and topological invariant can be unambiguously seen with the existence of decay and disorders, even with few resonators in the lattice.

Cavity optomechanical system-a powerful platform for investigating quantum effects

Brief introduction of cavity optomechanical system.It is well known that mechanical oscillators are particularly interesting devices,since they represent a prototype of classical systems[1].Due to the rapid devel-opment of the microfabrication feld,micro-or nanomechanical oscilla-tors can be successfully engineered and further controlled at a level of very high precision.However,limited by the manipulation technique,how to reach the quantum regime for such systems still remains a ma-jor challenge in the early research.On the other hand,light will exert a pressure force on an object,which is the so-called mechanical effect of light.This phenomenon originates from the fact that light carries momentum.

Manipulation of multi-transparency windows and fast-slow light transitions in a hybrid cavity optomechanical system

We study the generation of quadruple-transparency windows and the implementation of a conversion between slow and fast light in a hybrid optomechanical system. By demonstrating the generation of these transparency windows one by one, we analyze the physical mechanism through which each transparency window forms in detail. Additionally, we discuss how the system parameters affect the formation of transparency windows and conclude that the location, width, and absorption of each transparency window can be arbitrarily manipulated by varying the appropriate parameters. Moreover, when the pump field is changed from red to blue detuning, conversions between slow and fast light occur in the output field. These interesting properties of the output field can be applied to achieve the coherent control and manipulation of light pulses using cavity optomechanical system.

Special modes induced by inter-chain coupling in a non-Hermitian ladder system

We explore some interesting phenomena in a simple non-Hermitian ladder system.Special modes with energy eigenvalues closely related to the inter-chain-coupling strength appear in the non-Hermitian ladder system.We show that a phase transition occurs whereby special modes with pure real eigenvalues can switch to special modes with pure imaginary eigenvalues,when the inter-chain-coupling strength changes from symmetric to asymmetric.We find that the density profiles of all the special modes are completely identical under certain conditions,even if the inter-chain-coupling strength is added into the non-Hermitian ladder system in different ways.Moreover,we also demonstrate that the different inter-chain couplings are fundamentally equivalent to adding different on-site potential energies into the non-Hermitian ladder system.

Ground state cooling of magnomechanical resonator in PT-symmetric cavity magnomechanical system at room temperature

We propose to realize the ground state cooling of magnomechanical resonator in a parity-time(PT).symmetric cavity magnomechanical system composed of a loss ferromagnetic sphere and a gain microwave cavity.In the scheme,the magnomechanical resonator can be cooled close to its ground state via the magnomechanical interaction,and it is found that the cooling effect in PT-symmetric system is much higher than that in non-PT-symmetric system.Resorting to the magnetic force noise spectrum,we investigate the final mean phonon number with experimentally feasible parameters and find surprisingly that the ground state cooling of magnomechanical resonator can be directly achieved at room temperature.Furthermore,we also illustrate that the ground state cooling can be flexibly controlled via the external magnetic field.