采用(NH_(4))_(2)SO_(4)焙烧-水浸工艺提高菱镁矿的利用效率

研究采用硫酸铵焙烧—水浸工艺提高菱镁矿的利用效率,结合XRD和TG-DTA分析以及对比硫酸铵焙烧MgO的物相变化得到焙烧过程中矿相的转化过程。实验结果表明,在菱镁矿粒度为~74μm、硫酸铵与菱镁矿物料摩尔比为1.6:1、焙烧温度为475℃和焙烧时间为2 h的条件下,镁的提取率达到98.7%。反应中物相转化过程可以概括如下:MgCO_(3)先转变为(NH_(4))_(2)Mg_(2)(SO_(4))_(3),再分解得到MgSO_(4)。反应遵循化学反应和扩散混合控制机理,其表观活化能为33.02 k J/mol。

Extraction and kinetic analysis of Pb and Sr from the leaching residue of zinc oxide ore

NH4HCO3 conversion followed by HCl leaching was performed and proven to be effective in extracting Pb and Sr from zinc extracted residual.The mechanism and operating conditions of NH4HCO3 conversion,including molar ratio of NH4HCO3 to zinc extracted residual,NH4HCO3 concentration,conversion temperature,conversion time,and stirring velocity,were discussed,and operating conditions were optimized by the orthogonal test.Experimental results indicate that NH4HCO3 conversion at temperatures ranging from 25 to 85°C follows the shrinking unreacted core model and is controlled by inner diffusion through the product layer.The extraction ratios of Pb and Sr under optimized conditions reached 85.15%and 87.08%,respectively.Moreover,the apparent activation energies of Pb and Sr were 13.85 and 13.67 kJ·mol^−1,respectively.

Reaction mechanism of roasting Zn_2SiO_4 using NaOH

The reaction kinetics of roasting zinc silicate using NaOH was investigated.The orthogonal test was employed to optimize the reaction conditions and the optimized reaction conditions were as follows:molar ratio of NaOH to Zn2SiO4 of 16:1,reaction temperature of 550°C,and reaction time of 2.5 h.In order to ascertain the phases transformation and reaction processes of zinc oxide and silica,the XRD phase analysis was used to analyze the phases of these specimens roasted at different temperatures.The final phases of the specimen roasted at 600°C were Na2ZnO2,Na4SiO4,Na2ZnSiO4 and NaOH.The reaction kinetic equation of roasting was determined by the shrinking unreacted core model.Aiming to investigate the reaction mechanism,two control models of reaction rate were applied:chemical reaction at the particle surface and diffusion through the product layer.The results indicated that the diffusion through the product layer model described the reaction process well.The apparent activation energy of the roasting was 19.77 kJ/mol.

Zinc extraction from zinc oxidized ore using(NH4)2SO4 roasting−leaching process

An improved method of(NH4)2SO4 roasting followed by water leaching to utilize zinc oxidized ores was studied.The operating parameters were obtained by investigating the effects of the molar ratio of(NH4)2SO4 to zinc,roasting temperature,and holding time on zinc extraction.The roasting process followed the chemical reaction control mechanism with the apparent activation energy value of 41.74 kJ·mol^−1.The transformation of mineral phases in roasting was identified by X-ray diffraction analysis combined with thermogravimetry–differential thermal analysis curves.The water leaching conditions,including the leaching temperature,leaching time,stirring velocity,and liquid-to-solid ratio,were discussed,and the leaching kinetics was studied.The reaction rate was obtained under outer diffusion without product layer control;the values of the apparent activation energy for two stages were 4.12 and 8.19 kJ·mol^−1.The maximum zinc extraction ratio reached 96%while the efficiency of iron extraction was approximately 32%under appropriate conditions.This work offers an effective method for the comprehensive use of zinc oxidized ores.

Growth mechanism and photocatalytic evaluation of flower-like ZnO microstructures prepared with SDBS assistance

Flower-like ZnO microstructures were successfully produced using a hydrothermal method employing ZnSO_(4)/(NH_(4))_(2)SO_(4) as a raw material.The effect of the operating parameters of the hydrothermal temperature, OH^(-)/Zn^(2+) molar ratio, time, and amount of dispersant on the phase structure and micromorphology of the ZnO particles were investigated.The synthesis conditions of the flower-like ZnO microstructures were: hydrothermal temperature of 160℃, OH^(-)/Zn^(2+) molar ratio of 5:1, reaction time of 4 h, and 4 mL of dispersant.The flower-like ZnO microstructures were comprised of hexagon-shaped ZnO rods arranged in a radiatively.Degradation experiments of Rhodamine B with the flower-like ZnO microstructures demonstrated a degradation efficiency of 97.6% after 4 h of exposure to sunshine, indicating excellent photocatalytic capacity.The growth mechanism of the flower-like ZnO microstructures was presented.

Reaction condition optimization and kinetic investigation of roasting zinc oxide ore using (NH_4)_2SO_4

An orthogonal test was used to optimize the reaction conditions of roasting zinc oxide ore using（NH_4）_2SO_4. The optimized reaction conditions are defined as an（NH_4）_2SO_4/zinc molar ratio of 1.4：1, a roasting temperature of 440°C, and a thermostatic time of 60 min. The molar ratio of（NH_4）_2SO_4/zinc is the most predominant factor and the roasting temperature is the second significant factor that governs the zinc extraction. Thermogravimetric-differential thermal analysis was used for（NH_4）_2SO_4 and zinc mixed in a molar ratio of 1.4：1 at the heating rates of 5, 10, 15, and 20 K·min-1. Two strong endothermic peaks indicate that the complex chemical reactions occur at approximately 290°C and 400°C. XRD analysis was employed to examine the transformations of mineral phases during roasting process. Kinetic parameters, including reaction apparent activation energy, reaction order, and frequency factor, were calculated by the Doyle-Ozawa and Kissinger methods. Corresponding to the two endothermic peaks, the kinetic equations were obtained.

Facile fabrication of spherical flower-like Mg(OH)2 and its fast and efficient removal for heavy metal ions

Spherical flower-like Mg(OH)_(2) was fabricated from MgSO_(4) effluent and its adsorption performance for heavy metal ions was evaluated.The appropriate fabrication conditions are as follows:Mg^(2+)/NH4OH molar ratio of 1:0.5,temperature of 120°C and time of 1 h at Mg^(2+)concentration of 2 mol/L.Spherical flower-like Mg(OH)_(2) composed of ultra-thin sheets exhibits an excellent adsorption ability for Ni^(2+),Cu^(2+),Zn^(2+),Pb^(2+),Fe^(3+)and Co^(2+),and the adsorption reaches the equilibrium in 6 min.The maximum adsorption capacities of the studied heavy metal ions onto Mg(OH)_(2) at 20°C are 58.55,85.84,44.94,485.44,625.00 and 27.86 mg/g,respectively.The adsorption is well fitted by the Langmuir model,indicating that the adsorption is monolayer.The adsorption kinetics follows the pseudo-second-order model.Chemisorption is the operative mechanism.Spherical flower-like Mg(OH)_(2) is a qualified candidate for heavy metal ions removal.