Combining Self-Organizing Map and Lipschitz Condition for Estimation in Direction of Arrival

There are many DOA estimation methods based on different signal features, and these methods are often evaluated by experimental results, but lack the necessary theoretical basis. Therefore, a direction of arrival (DOA) estimation system based on self-organizing map (SOM) and designed for arbitrarily distributed sensor array is proposed. The essential principle of this method is that the map from distance difference of arrival (DDOA) to DOA is Lipschitz continuity, it indicates the similar topology between them, and thus Kohonen SOM is a suitable network to classify DOA through DDOA. The simulation results show that the DOA estimation errors are less than 1° for most signals between 0° to 180°. Compared to MUSIC, Root-MUSIC, ESPRIT, and RBF, the errors of signals under signal-to-noise ratios (SNR) declines from 20 dB to 2 dB are robust, SOM is better than RBF and almost close to MUSIC. Further, the network can be trained in advance, which makes it possible to be implemented in real-time.

Size effects on the mixed modes and defect modes for a nano-scale phononic crystal slab

The size-dependent band structure of an Si phononic crystal(PnC)slab with an air hole is studied by utilizing the non-classic wave equations of the nonlocal strain gradient theory(NSGT).The three-dimensional(3D)non-classic wave equations for the anisotropic material are derived according to the differential form of the NSGT.Based on the the general form of partial differential equation modules in COMSOL,a method is proposed to solve the non-classic wave equations.The bands of the in-plane modes and mixed modes are identified.The in-plane size effect and thickness effect on the band structure of the PnC slab are compared.It is found that the thickness effect only acts on the mixed modes.The relative width of the band gap is widened by the thickness effect.The effects of the geometric parameters on the thickness effect of the mixed modes are further studied,and a defect is introduced to the PnC supercell to reveal the influence of the size effects with stiffness-softening and stiffness-hardening on the defect modes.This study paves the way for studying and designing PnC slabs at nano-scale.

Folding beam-type piezoelectric phononic crystal with low-frequency and broad band gap

A folding beam-type piezoelectric phononic crystal model is proposed to isolate vibration. Two piezoelectric bimorphs are joined by two masses as a folding structure to comprise each unit cell of the piezoelectric phononic crystal. Each bimorph is connected independently by a resistive-inductive resonant shunting circuit. The folding structure extends the propagation path of elastic waves, while its structure size remains quite small. Propagation of coupled extension-flexural elastic waves is studied by the classical laminated beam theory and transfer matrix method. The theoretical model is further verified with the finite element method(FEM). The effects of geometrical and circuit parameters on the band gaps are analyzed. With only 4 unit cells, the folding beam-type piezoelectric phononic crystal generates two Bragg band gaps of 369 Hz to1 687 Hz and 2 127 Hz to 4 000 Hz. In addition, between these two Bragg band gaps, a locally resonant band gap is induced by resonant shunting circuits. Appropriate circuit parameters are used to join these two Bragg band gaps by the locally resonant band gap.Thus, a low-frequency and broad band gap of 369 Hz to 4 000 Hz is obtained.

HIGH-FREQUENCY VIBRATIONS OF CORRUGATED CYLINDRICAL PIEZOELECTRIC SHELLS

Coupled extensional and flexural cylindrical vibrations of a corrugated cylindrical piezoelectric shell consisting of multiple pieces of circular cylindrical surfaces smoothly connected along their generatrix are studied. To validate the results for the case of relatively thick shells or equivalently high-frequency modes with short wavelengths, existing analysis is extended by considering shear deformation and rotatory inertia. An analytical solution is obtained. Based on the solution, resonant frequencies and mode shapes are calculated.

Third-order elastic, piezoelectric, and dielectric constants

The definitions of the third-order elastic,piezoelectric,and dielectric constants and the properties of the associated tensors are discussed.Based on the energy conservation and coordinate transformation,the relations among the third-order constants are obtained.Furthermore,the relations among the third-order elastic,piezoelectric,and dielectric constants of the seven crystal systems and isotropic materials are listed in detail.These third-order constants relations play an important role in solving nonlinear problems of elastic and piezoelectric materials.It is further found that all third-order piezoelectric constants are 0 for 15 kinds of point groups,while all third-order dielectric constants are 0 for 16 kinds of point groups as well as isotropic material.The reason is that some of the point groups are centrally symmetric,and the other point groups are high symmetry.These results provide the foundation to measure these constants,to choose material,and to research nonlinear problems.Moreover,these results are helpful not only for the study of nonlinear elastic and piezoelectric problems,but also for the research on flexoelectric effects and size effects.

DYNAMIC CHARACTERISTICS OF AXIALLY-SYMMETRICAL ANNULAR CORRUGATED SHELL PIEZOELECTRIC TRANSDUCERS

The coupled extensional and flexural vibrations of an annular corrugated shell piezoelectric transducer consisting of multiple circularly-annular surfaces smoothly connected along the interfaces were investigated in the paper. Only a time-harmonic voltage is applied across two electrodes of the piezoelectric shell as the external loading. A theoretical solution was obtained using the classical shell theory. Based on the solution, basic vibration characteristics of resonant frequencies, mode shapes were calculated and examined.

Two Kinds Equal Frequency Circuits to Achieve Locally Resonant Band Gap of a Circular Plate Attached Alternately by Piezoelectric Unimorphs

A circular thin plate is proposed for vibration attenuation,which is attached alternately by annular piezoelectric unimorphs with resonant shunt circuits.Two kinds of equal frequency resonant shunt circuits are designed to achieve an integrated locally resonant（LR）band gap（BG） with a much smaller transmission factor：（1） the structure is arrayed periodically while the resonant shunt circuits are aperiodic;（2） the resonant shunt circuits are periodic while the structure is aperiodic.The transmission factor curve is calculated,which is validated by the finite element method.Dependences of the LR BG performance upon the geometric and electric parameters are also analyzed.