期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
轻掺杂硅基神经电极的光噪声消减 被引量:1
1
作者 魏春蓉 王飞 +10 位作者 裴为华 刘智多 毛旭瑞 赵宏泽 王思凯 王毅军 杨晓伟 刘媛媛 赵姗姗 归强 陈弘达 《物理化学学报》 SCIE CAS CSCD 北大核心 2020年第12期109-115,共7页
硅基神经电极是记录神经细胞放电活动的一种实用工具。使用标准的集成电路加工技术,在宽度仅为70μm的单个硅基针上能排布上千个电极记录位点。光遗传学的发展使控制神经元活动更加精确,通过在给予光刺激的同时记录神经元的电活动,可以... 硅基神经电极是记录神经细胞放电活动的一种实用工具。使用标准的集成电路加工技术,在宽度仅为70μm的单个硅基针上能排布上千个电极记录位点。光遗传学的发展使控制神经元活动更加精确,通过在给予光刺激的同时记录神经元的电活动,可以获取更丰富的脑活动信息。当使用黄光或蓝光刺激神经元时,光子的能量大于硅衬底的禁带宽度,价带电子被激发到导带,从而生成电子-空穴对。因此,在光刺激下使用硅基神经电极时,硅基板中的光生载流子将严重干扰电极的信噪比。为满足在光刺激同时记录电活动的应用需求,必须减少光对硅基神经电极的噪声干扰。传统的降噪方法是使用重掺杂硅作为衬底材料,通过增加杂质浓度来降低载流子寿命,从而降低硅电极的光学噪声。但是,重掺杂的硅衬底比轻掺杂的硅衬底具有更多的晶格缺陷,这使得硅基电极更加脆弱,并且该方法与标准的集成电路加工技术不兼容。通过分析在轻掺杂硅衬底上制造电极的光致噪声机理,我们发现由光激发产生的载流子的不均匀分布将使轻掺杂硅衬底极化。由光致极化引起的电势将影响在其上制造的电极。将轻掺杂硅衬底金属化和接地将有效降低极化电位。使用这种方法,由光诱发的噪声幅度将下降到原始值的0.87%。为了确保神经元的放电率,将光刺激脉冲频率选择为20 Hz。在1 mW·mm^(-2)的光照下,电极的背景噪声可控制在45μV以下,可以满足一般光遗传学应用的需求。经过上述方式改造后的轻掺杂硅衬底将满足光遗传学应用对神经探针的要求。与传统的通过重掺杂整个衬底降低光噪声方法不同,该方法与标准的集成电路加工技术兼容,为利用标准集成电路加工技术制备高密度、高通量硅电极提供了噪声消除方法。 展开更多
关键词 光噪声 光生载流子 光遗传学 轻掺杂 硅基神经微探针
下载PDF
The slope creep law for a soft rock in an open-pit mine in the Gobi region of Xinjiang, China 被引量:2
2
作者 hongze zhao Yu Tian +2 位作者 Qingyong Guo Meijie Li Jianwen Wu 《International Journal of Coal Science & Technology》 EI 2020年第2期371-379,共9页
The lithology of the strata in the Gobi region of the Xinjiang autonomous region of China is mainly composed of mudstone,silty mudstone,and other soft rocks.Because of the low strength of the rock mass and the serious... The lithology of the strata in the Gobi region of the Xinjiang autonomous region of China is mainly composed of mudstone,silty mudstone,and other soft rocks.Because of the low strength of the rock mass and the serious effects of physical weathering in this area,the slope stability in open-pit mines is poor,and creep deformation and instability can readily occur.Taking the Dananhu No.2 open-pit mine as a typical example,the creep test of a mudstone sample under different stress levels was studied.Then,based on a bottom friction experiment and a FLAC3D numerical simulation,the deformation and failure processes of the slope were analyzed.The stress–displacement curve and the displacement–time curve for the monitoring points were plotted to obtain the relationship between the stress and displacement for the slope of the soft rock.The results showed that the long-term strength of the mudstone was between 8.0 and 8.8 MPa,and that stable creep occurred when the slope was under low stress.The potential failure mode for this type of slope is that the front edge creeps along the weak layer and then a crack is formed at the trailing edge of the slope.When the crack penetrates the weak layer,cutting bedding and bedding sliding occur.The deformation process of the stable creep slope includes an initial deformation stage,an initial creep stage,a constant velocity creep stage and a deceleration creep stage. 展开更多
关键词 Gobi region Soft rock slope Numerical simulation Creep deformation Creep experiment
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部