Asphaltenes generally exist in the form of molecular aggregates in crude oil or in petroleum residues,and asphaltene aggregates can usually cause serious problems to oil exploitation,transportation,and processing.Achi...Asphaltenes generally exist in the form of molecular aggregates in crude oil or in petroleum residues,and asphaltene aggregates can usually cause serious problems to oil exploitation,transportation,and processing.Achieving deaggregation and separation of asphaltene aggregates is a premise and basis for molecular characterization and processing of heavy oils.Aiming at the intermolecular interactions in asphaltene molecular aggregates,it has proposed and summarized that aspahltene aggregates can be subject to deaggregation by means of five approaches,including solvent diluting,removing active sites,moderate heating,ultrasonication and on-line molecular collision.Moreover,asphaltenes can be further separated to narrow fractions for molecular-level research based on polarity difference,molecular size difference,acid-base properties,and reactivity difference.展开更多
Replacement of precious single metal catalysts with cost-effective,highly-dispersed composite catalysts for catalytic hydrothermal conversion of residue holds tremendous promise for the residue upgrading technologies....Replacement of precious single metal catalysts with cost-effective,highly-dispersed composite catalysts for catalytic hydrothermal conversion of residue holds tremendous promise for the residue upgrading technologies.Organic metals were added to the feed as the oil-soluble precursors,and were transformed into the catalytic active phases in this work.Physical properties and structures of the composite catalysts had been investigated by X-ray fluorescence spectroscopy,X-ray photoelectron spectroscopy,X-ray diffraction,scanning electron microscopy and transmission electron microscopy.The composite catalysts were found to be highly efficient in the catalytic hydrothermal conversion of both the model compound and the residue.Increased metal dispersion and synergistic effects of two metals played indispensable roles in such catalytic system.Results showed that under the test conditions specified in the article,the catalyst had the best catalytic performance when the mass ratio of molybdenum to iron was 1.5.展开更多
High resolution tandem mass spectrometry has been applied to obtain the structure information of petroleumsamples. Here, we report a mefflod for structural characterization of crude oil molecules by the collision-indu...High resolution tandem mass spectrometry has been applied to obtain the structure information of petroleumsamples. Here, we report a mefflod for structural characterization of crude oil molecules by the collision-induced dissocia-tion （CID） technology coupled wiffl the high-field Fourier transform ion cyclotron resonmlce mass spectrometry （FT-ICRMS）. The ion isolation window was narrowed down to 1 Da to distinguish file complex homologues contained in petroleum.Aromatic model compounds and crude oil samples were measured by CID FT-ICR MS at different collision energy levels.The fragmentation of model compounds wiffl alkyl side-chains was found to be related to the size of file aromatic rings. Thefragmentation of model compounds wiffl archipelago structures depended on file lengffl of file bridge alkylene chain. Theprevalent reaction pafflway of model compounds with naphthenic rings was mainly determined by the position of naphfflen-ic rings in file molecules. On file basis of file fragmentation pathways, the structure differences of two crude oils were recog-nized as different content of naphthenic rings by CID technology with 1 Da isolation window. The NMR analysis was alsoapplied to confirm file CID results. This study exhibits the great potential of CID FT-ICR MS wiffl narrow isolation windowin file smlctural characterization of crude oil molecules.展开更多
The linkage of aromatic ring structures in vacuum residues was important for the refining process. The Fourier transform ion cyclotron resonance mass spectrometry(FT-ICR MS) combined with collision-induced dissociatio...The linkage of aromatic ring structures in vacuum residues was important for the refining process. The Fourier transform ion cyclotron resonance mass spectrometry(FT-ICR MS) combined with collision-induced dissociation(CID) is a powerful method to characterize the molecular structure of petroleum fractions. In this work, model compounds with different aromatic ring structures were measured by CID FT-ICR MS. The cracking of the parent ions and the generated fragment ions were able to distinguish different linkage of the model compounds. Then, vacuum residues were separated into saturates, aromatics, resins and asphaltenes fractions(SARA), and each fraction was characterized by CID technology. According to the experimental results, the aromatic rings in saturates and aromatics fractions were mainly of the island-type structures, while the aromatic rings in resins and asphaltenes fractions had a significant amount of archipelago-type structures.展开更多
文摘Asphaltenes generally exist in the form of molecular aggregates in crude oil or in petroleum residues,and asphaltene aggregates can usually cause serious problems to oil exploitation,transportation,and processing.Achieving deaggregation and separation of asphaltene aggregates is a premise and basis for molecular characterization and processing of heavy oils.Aiming at the intermolecular interactions in asphaltene molecular aggregates,it has proposed and summarized that aspahltene aggregates can be subject to deaggregation by means of five approaches,including solvent diluting,removing active sites,moderate heating,ultrasonication and on-line molecular collision.Moreover,asphaltenes can be further separated to narrow fractions for molecular-level research based on polarity difference,molecular size difference,acid-base properties,and reactivity difference.
基金This work is financially supported by the China Petroleum and Chemical Corporation(SINOPEC 120063-1).
文摘Replacement of precious single metal catalysts with cost-effective,highly-dispersed composite catalysts for catalytic hydrothermal conversion of residue holds tremendous promise for the residue upgrading technologies.Organic metals were added to the feed as the oil-soluble precursors,and were transformed into the catalytic active phases in this work.Physical properties and structures of the composite catalysts had been investigated by X-ray fluorescence spectroscopy,X-ray photoelectron spectroscopy,X-ray diffraction,scanning electron microscopy and transmission electron microscopy.The composite catalysts were found to be highly efficient in the catalytic hydrothermal conversion of both the model compound and the residue.Increased metal dispersion and synergistic effects of two metals played indispensable roles in such catalytic system.Results showed that under the test conditions specified in the article,the catalyst had the best catalytic performance when the mass ratio of molybdenum to iron was 1.5.
基金supported by the Key Laboratory of SINOPEC (KL17010)the research project of Research Institute of Petroleum Processing(R16075)
文摘High resolution tandem mass spectrometry has been applied to obtain the structure information of petroleumsamples. Here, we report a mefflod for structural characterization of crude oil molecules by the collision-induced dissocia-tion （CID） technology coupled wiffl the high-field Fourier transform ion cyclotron resonmlce mass spectrometry （FT-ICRMS）. The ion isolation window was narrowed down to 1 Da to distinguish file complex homologues contained in petroleum.Aromatic model compounds and crude oil samples were measured by CID FT-ICR MS at different collision energy levels.The fragmentation of model compounds wiffl alkyl side-chains was found to be related to the size of file aromatic rings. Thefragmentation of model compounds wiffl archipelago structures depended on file lengffl of file bridge alkylene chain. Theprevalent reaction pafflway of model compounds with naphthenic rings was mainly determined by the position of naphfflen-ic rings in file molecules. On file basis of file fragmentation pathways, the structure differences of two crude oils were recog-nized as different content of naphthenic rings by CID technology with 1 Da isolation window. The NMR analysis was alsoapplied to confirm file CID results. This study exhibits the great potential of CID FT-ICR MS wiffl narrow isolation windowin file smlctural characterization of crude oil molecules.
基金supported by the Major State Basic Research Development Program of China (973 Program, No. 2012CB224801)
文摘The linkage of aromatic ring structures in vacuum residues was important for the refining process. The Fourier transform ion cyclotron resonance mass spectrometry(FT-ICR MS) combined with collision-induced dissociation(CID) is a powerful method to characterize the molecular structure of petroleum fractions. In this work, model compounds with different aromatic ring structures were measured by CID FT-ICR MS. The cracking of the parent ions and the generated fragment ions were able to distinguish different linkage of the model compounds. Then, vacuum residues were separated into saturates, aromatics, resins and asphaltenes fractions(SARA), and each fraction was characterized by CID technology. According to the experimental results, the aromatic rings in saturates and aromatics fractions were mainly of the island-type structures, while the aromatic rings in resins and asphaltenes fractions had a significant amount of archipelago-type structures.
