The clinical trials of tumor therapy using heavy ions beam 12C are now in progress at Institute of Modern Physics in Lanzhou. In order to achieve the precise radiotherapy with the high energy 12C beam in active pencil...The clinical trials of tumor therapy using heavy ions beam 12C are now in progress at Institute of Modern Physics in Lanzhou. In order to achieve the precise radiotherapy with the high energy 12C beam in active pencil beam scanning mode, we have developed an ionization chamber(IC) as an online monitor for beam intensity and also a dosimeter after calibration. Through the choosing of working gas and voltage, optimizing of the electrics and the read-out system, calibrating the linearity, the detector system provide us one of the simple and highly reliable way to monitoring the beam during the active pencil beam scanning treatments. The measurement results of this detector system show that it could work well under the condition of high energy 12C beam in active pencil beam scanning mode.展开更多
In this paper we present a timing detector which has low detection threshold and is radiation-resistant.The photons induced by radioactive beam ions passing through a thin plastic-scintillator foil BC422,emit from the...In this paper we present a timing detector which has low detection threshold and is radiation-resistant.The photons induced by radioactive beam ions passing through a thin plastic-scintillator foil BC422,emit from the foil center corresponding to one focal point of an aluminum ellipsoidal mirror and are reflected to another focus point at which the cathode of a photomultiplier tube locates.A time resolution of about 115 ps can be achieved for1 2N of 58.5 MeV/u and 130 ps for1 7B of 43.7 MeV/u.The counting rate up to 10 8packets per second(pps) is allowed.展开更多
The formation of the Tongyu gold deposit, controlled by regional polyphase deformation-metamorphism.is closely related to the regional composite antiform-shear slip fracture zone. Late-stage reworking of theTaihua Gro...The formation of the Tongyu gold deposit, controlled by regional polyphase deformation-metamorphism.is closely related to the regional composite antiform-shear slip fracture zone. Late-stage reworking of theTaihua Group accounts for the enrichment of ore substances. It is a typical syntectonic gold deposit. The formation and evolution of the deposit involved four stages: (Ⅰ) the state of preparation of ore sub-stances, in which primary source beds originated: (Ⅱ) the stage of remobilization of ore substances, in whichregional progressive metamorphism and migmatization and thermodynamic-chemical differentiation led toremobilization of gold and its initial local concentration: (Ⅲ) the stage of gold deposit formation, in which re-gional folding produced concordant and cross shear-slip fractures and under the dynamic action gold was sepa-rated and migrated in a certain direction and concentrated to form a gold deposit: (Ⅳ) the stage ofsuperpositon, reworking and exposure of orebodies, in which the block uplifted and the deposit againunderwent reworking through faulting and mechanical differentiation.Thermodynamic mineralization played adominant role in the formation of the deposit.展开更多
Mass is one of the fundamental properties of atomic nuclei. Isochronous mass spectrometry (IMS), using astorage ring combined with an in-flight separator, has been shown to be a powerful tool for mass measurementof ex...Mass is one of the fundamental properties of atomic nuclei. Isochronous mass spectrometry (IMS), using astorage ring combined with an in-flight separator, has been shown to be a powerful tool for mass measurementof exotic nuclei[1]. Recently, masses of many proton-rich nuclides were accurately determined at the HIRFL-CSRfacility[2]. In this paper, we described the first isochronous mass measurement of neutron-rich nuclides at CSRe.This experiment was performed at the end of 2011. In the experiment, the primary beam of 86Kr28+ ions wasaccumulated and accelerated to an energy of 460.65 MeV/u in the synchrotron CSRm. The 86Kr28+ ions were fastextracted and focused on a 15 mm thick beryllium target which was placed at the entrance of the RIBLL2 (anin-flight fragment separator).展开更多
Isochronous mass spectrometry in storage rings is a successful technique for the precision mass measurements ofthe nuclides with half-lives down to tens of microseconds[1]. Since the isochronous condition =t greatly r...Isochronous mass spectrometry in storage rings is a successful technique for the precision mass measurements ofthe nuclides with half-lives down to tens of microseconds[1]. Since the isochronous condition =t greatly reducesthe influence of the velocity difference on the ion revolution periods, the revolution period difference ΔT =T ??TRof a stored ion with respect to a reference time TR is directly related to its mass-to-charge ratio difference Δ(m=q),written in the first order as:展开更多
In order to satisfy high precision requirement for the modern nuclear physics experiment detectors and radiologicimaging technology equipments, we do some researches in the LaBr3 detector with digital waveform applica...In order to satisfy high precision requirement for the modern nuclear physics experiment detectors and radiologicimaging technology equipments, we do some researches in the LaBr3 detector with digital waveform application research techniques. The DRS4 board and digital waveformmethods substantially reduce the power consumption,which also are beneficial to the miniaturization ofthe data acquisition for large experiments, and to reducethe building cost.展开更多
基金Supported by the National Nature Science Foundation of China (No. 10305015, No.10475098)the Major Program of the Chinese Academy of Science (No. O701050YZD)
文摘The clinical trials of tumor therapy using heavy ions beam 12C are now in progress at Institute of Modern Physics in Lanzhou. In order to achieve the precise radiotherapy with the high energy 12C beam in active pencil beam scanning mode, we have developed an ionization chamber(IC) as an online monitor for beam intensity and also a dosimeter after calibration. Through the choosing of working gas and voltage, optimizing of the electrics and the read-out system, calibrating the linearity, the detector system provide us one of the simple and highly reliable way to monitoring the beam during the active pencil beam scanning treatments. The measurement results of this detector system show that it could work well under the condition of high energy 12C beam in active pencil beam scanning mode.
基金Supported by National Nature Science Foundation of China (No.10205019,10475098)Doctoral Foundation of Southwest University (No.SWNUB2005028)Hundred Talent Project of CAS (0501080BR0)
文摘In this paper we present a timing detector which has low detection threshold and is radiation-resistant.The photons induced by radioactive beam ions passing through a thin plastic-scintillator foil BC422,emit from the foil center corresponding to one focal point of an aluminum ellipsoidal mirror and are reflected to another focus point at which the cathode of a photomultiplier tube locates.A time resolution of about 115 ps can be achieved for1 2N of 58.5 MeV/u and 130 ps for1 7B of 43.7 MeV/u.The counting rate up to 10 8packets per second(pps) is allowed.
文摘The formation of the Tongyu gold deposit, controlled by regional polyphase deformation-metamorphism.is closely related to the regional composite antiform-shear slip fracture zone. Late-stage reworking of theTaihua Group accounts for the enrichment of ore substances. It is a typical syntectonic gold deposit. The formation and evolution of the deposit involved four stages: (Ⅰ) the state of preparation of ore sub-stances, in which primary source beds originated: (Ⅱ) the stage of remobilization of ore substances, in whichregional progressive metamorphism and migmatization and thermodynamic-chemical differentiation led toremobilization of gold and its initial local concentration: (Ⅲ) the stage of gold deposit formation, in which re-gional folding produced concordant and cross shear-slip fractures and under the dynamic action gold was sepa-rated and migrated in a certain direction and concentrated to form a gold deposit: (Ⅳ) the stage ofsuperpositon, reworking and exposure of orebodies, in which the block uplifted and the deposit againunderwent reworking through faulting and mechanical differentiation.Thermodynamic mineralization played adominant role in the formation of the deposit.
文摘Mass is one of the fundamental properties of atomic nuclei. Isochronous mass spectrometry (IMS), using astorage ring combined with an in-flight separator, has been shown to be a powerful tool for mass measurementof exotic nuclei[1]. Recently, masses of many proton-rich nuclides were accurately determined at the HIRFL-CSRfacility[2]. In this paper, we described the first isochronous mass measurement of neutron-rich nuclides at CSRe.This experiment was performed at the end of 2011. In the experiment, the primary beam of 86Kr28+ ions wasaccumulated and accelerated to an energy of 460.65 MeV/u in the synchrotron CSRm. The 86Kr28+ ions were fastextracted and focused on a 15 mm thick beryllium target which was placed at the entrance of the RIBLL2 (anin-flight fragment separator).
文摘Isochronous mass spectrometry in storage rings is a successful technique for the precision mass measurements ofthe nuclides with half-lives down to tens of microseconds[1]. Since the isochronous condition =t greatly reducesthe influence of the velocity difference on the ion revolution periods, the revolution period difference ΔT =T ??TRof a stored ion with respect to a reference time TR is directly related to its mass-to-charge ratio difference Δ(m=q),written in the first order as:
文摘In order to satisfy high precision requirement for the modern nuclear physics experiment detectors and radiologicimaging technology equipments, we do some researches in the LaBr3 detector with digital waveform application research techniques. The DRS4 board and digital waveformmethods substantially reduce the power consumption,which also are beneficial to the miniaturization ofthe data acquisition for large experiments, and to reducethe building cost.
