It has been proven by a number of earthquake case studies that an active fault-induced earthquake beneath a city can be devastating. It is an urgent issue for seismic hazard reduction to explore the distribution of ac...It has been proven by a number of earthquake case studies that an active fault-induced earthquake beneath a city can be devastating. It is an urgent issue for seismic hazard reduction to explore the distribution of active faults beneath the urban area and identify the seismic source and the risks underneath. As a pilot project of active fault exploration in China, the project, entitled “Active fault exploration and seismic hazard assessment in Fuzhou City", started in early 2001 and passed the check before acceptance of China Earthquake Administration in August 2004. The project was aimed to solve a series of scientific issues such as fault location, dating, movement nature, deep settings, seismic risk and hazard, preparedness of earthquake prevention and disaster reduction, and etc. by means of exploration and assessment of active faults by stages, i.e., the preliminary survey and identification of active faults in target area, the exploration of deep seismotectonic settings, the risk evaluation of active seismogenic faults, the construction of geographic information system of active faults, and so on. A lot of exploration methods were employed in the project such as the detection of absorbed mercury, free mercury and radon in soil, the geological radar, multi-channel DC electrical method, tsansient electromagnetic method, shallow seismic refraction and reflection, effect contrast of explored sources, and various sounding experiments, to establish the buried Quaternary standard section of the Fuzhou basin. By summing up, the above explorations and experiments have achieved the following results and conclusions: (1)The results of the synthetic pilot project of active fault exploration in Fuzhou City demonstrate that, on the basis of sufficient collection, sorting out and analysis of geological, geophysical and borehole data, the best method for active fault exploration (location) and seismic risk assessment (dating and characterizing) in urban area is the combination of various approaches, that is, the possible location of active fault determined by using geochemical exploration as a guide “scout", the shallow seismic sounding as the main tool, the electromagnetic method as a supplement, establishing the standard Quaternary profile or stratigraphic sequence from drilling and various geophysical parameters from borehole logs as methods to correct and verify the data above. And in addition, the method also includes the field surveys on fault exposures, trenching, paleoearthquake investigation, dating and comparison of lithology, strata sequence, absolute or relative ages of the cores on the two sides of buried faults. (2)The Fuzhou basin locates under the regional seismotectonic settings which have the potential of moderate earthquake. Comparatively, the region is less affected by the “Taiwan dynamic Antenna"; (3)The activity of the major faults in Fuzhou basin is weak in general. All the six identified target faults are not Holocene faults, among which the Bayi Reservoir-Shanggan fault and the Minhou-Nanyu fault are dormant at least since the mid Epipleistocene time, and the rest are dormant since the Epipleistocene time; (4)In terms of deep-seated structures beneath the basin, there is no evidence indicating the possible occurrence of the underneath strong destructive earthquakes. The adjacent Changle-Zhao’an fault zone is the potential seismic source which may possibly affect Fuzhou City; (5)There exists potential of moderate-strong earthquake on the major faults of the region, but the probability is low; (6)The seismic hazards are weak in the region and the surface earthquake fractures are not likely to occur; (7)The first geographic information system of active faults is developed with functions of information query and display, data management, analysis and processing, etc.展开更多
The Zhangzhou basin is located at the middle section of the southeast coast seismic zone of the mainland of China. Using high-resolution refraction and wide-angle reflection/refraction seismic profiling of Zhangzhou b...The Zhangzhou basin is located at the middle section of the southeast coast seismic zone of the mainland of China. Using high-resolution refraction and wide-angle reflection/refraction seismic profiling of Zhangzhou basin and its vicinity, we have obtained the crustal geometric structure and velocity structure as well as the geometric configuration and structural relationship between the deep and shallow fractures.The results show that the crust in the region is divided into the upper crust and lower crust. The thickness of the upper crust is 16.5km～18.8km, and that of the lower crust is 12.0km～13.0km. The upper crust is further divided into an upper and lower section. In the lower section of the upper crust, there is a low-velocity layer with a velocity of about 6.00km/s; the depth of the top surface of the low-velocity layer is about 12.0km, and the thickness is about 5.0km. The lower crust is also divided into an upper and lower section. The depth of Moho is 29.0km～31.8km. There are 6 normal faults in the shallow crust in this region, and most of them extend downwards to a depth of less than 4km, the maximum depth is about 5km.Below the shallow normal faults, there is a conjectural high-dip angle deep fault zone. The fault zone extends downwards till the Moho and upwards into the low-velocity layer in lower section of the upper crust. The deep and shallow faults are not tectonically connected. The combination character of deep and shallow structures in the Zhangzhou basin indicates that the Jiulongjiang fault zone is a deep fault zone with distinct characteristics and a complex deep and shallow structure background. The acquisition of deep seismic exploration results obviously enhanced the reliability of explanation of deep-structural data and the exploration precision of the region. The combination of deep and shallow structures resulted in uniform explanation results. The delamination of the crust and the characteristic of the structures are more precise and explicit. We discovered for the first time the combination characteristics of extensional structures and listric faults in the upper crust. This is not only helpful to the integrative judgment of earthquake risk in Zhangzhou and its vicinity, but also of importance for deepening the knowledge of deep dynamic processes in the southeast coast seismic zone.展开更多
The Quanzhou basin and its adjacent areas locate in the middle of the southeastern coast seismic belt on the Chinese mainland. The very fine geometry structure of this area from near ground to Moho interface and the r...The Quanzhou basin and its adjacent areas locate in the middle of the southeastern coast seismic belt on the Chinese mainland. The very fine geometry structure of this area from near ground to Moho interface and the relationship between the deep and shallow faults are obtained based on deep seismic reflection profiling. This profile is the first deep seismic reflection profile in this area and it indicates that the crust can be divided into the upper crust and the lower crust and the thickness of crust is from 29.5 km to 31 km in this area. The upper crust and the lower crust can be also divided into two layers. There are shallow normal faults developed in the upper crust and extending to the depth from 6 km to 12 km. The angle of those listric faults decreases with depth and the faults joint into the C1 interface （detachment surface）. There is a high angle fault under the Yong’an-Jinjiang fault belt which cuts off the interface of the upper crust and the lower crust and the Moho interface. Although there is no connection between the shallow and the deep faults, it offers deep structural environment for moderate and strong earthquake because of the deep high angle fault. This exploration result improves the reliability and precision of explanation of deep crustal structure in this area. The pull-apart and listric normal fault model indicates that the upper crust structure accords to the dynamic process of Taiwan Straits. This is helpful for seismicity estimation of Quanzhou and its adjacent area and important for obtaining more of the dynamic process of the southeast coast seismic belt.展开更多
Based on detailed logging of fourteen drill holes, combined with the results of other researchers, the preliminary summarization on sedimentary characteristics of the late Pleistocene of the Fuzhou basin is done. The ...Based on detailed logging of fourteen drill holes, combined with the results of other researchers, the preliminary summarization on sedimentary characteristics of the late Pleistocene of the Fuzhou basin is done. The deposition of Fuzhou basin began from about 56.5ka BP and the sediments are composed of gravel, sand, clay and silt, which show a depositional sequence with granularity becoming smaller from the lower to the upper and a big lateral variation of lithology. There are three silt layers in late Quaternary strata of Fuzhou basin. The first and second layers were developed during the middle and late Holocene, the deposition time is about 7.86ka BP to 1.44 ka BP and they are the results of “Changle Transgression". The third was developed during the late of late Pleistocene and the deposition time is from 44ka BP to 20ka BP and it is the result of “Fuzhou Transgression".The buried late Quaternary sediments in Fuzhou basin can be divided into upper Pleistocene series and Holocene series, which include four formations from old to new. They are the Longhai formation (Q^3_pl), Dongshan formation (Qhd), Changle formation (Qhc) and Jiangtian formation (Qhj), respectively. The Longhai formation can be divided into three members and belongs to the Pleistocene series, other three formations belong to the Holocene series.展开更多
文摘It has been proven by a number of earthquake case studies that an active fault-induced earthquake beneath a city can be devastating. It is an urgent issue for seismic hazard reduction to explore the distribution of active faults beneath the urban area and identify the seismic source and the risks underneath. As a pilot project of active fault exploration in China, the project, entitled “Active fault exploration and seismic hazard assessment in Fuzhou City", started in early 2001 and passed the check before acceptance of China Earthquake Administration in August 2004. The project was aimed to solve a series of scientific issues such as fault location, dating, movement nature, deep settings, seismic risk and hazard, preparedness of earthquake prevention and disaster reduction, and etc. by means of exploration and assessment of active faults by stages, i.e., the preliminary survey and identification of active faults in target area, the exploration of deep seismotectonic settings, the risk evaluation of active seismogenic faults, the construction of geographic information system of active faults, and so on. A lot of exploration methods were employed in the project such as the detection of absorbed mercury, free mercury and radon in soil, the geological radar, multi-channel DC electrical method, tsansient electromagnetic method, shallow seismic refraction and reflection, effect contrast of explored sources, and various sounding experiments, to establish the buried Quaternary standard section of the Fuzhou basin. By summing up, the above explorations and experiments have achieved the following results and conclusions: (1)The results of the synthetic pilot project of active fault exploration in Fuzhou City demonstrate that, on the basis of sufficient collection, sorting out and analysis of geological, geophysical and borehole data, the best method for active fault exploration (location) and seismic risk assessment (dating and characterizing) in urban area is the combination of various approaches, that is, the possible location of active fault determined by using geochemical exploration as a guide “scout", the shallow seismic sounding as the main tool, the electromagnetic method as a supplement, establishing the standard Quaternary profile or stratigraphic sequence from drilling and various geophysical parameters from borehole logs as methods to correct and verify the data above. And in addition, the method also includes the field surveys on fault exposures, trenching, paleoearthquake investigation, dating and comparison of lithology, strata sequence, absolute or relative ages of the cores on the two sides of buried faults. (2)The Fuzhou basin locates under the regional seismotectonic settings which have the potential of moderate earthquake. Comparatively, the region is less affected by the “Taiwan dynamic Antenna"; (3)The activity of the major faults in Fuzhou basin is weak in general. All the six identified target faults are not Holocene faults, among which the Bayi Reservoir-Shanggan fault and the Minhou-Nanyu fault are dormant at least since the mid Epipleistocene time, and the rest are dormant since the Epipleistocene time; (4)In terms of deep-seated structures beneath the basin, there is no evidence indicating the possible occurrence of the underneath strong destructive earthquakes. The adjacent Changle-Zhao’an fault zone is the potential seismic source which may possibly affect Fuzhou City; (5)There exists potential of moderate-strong earthquake on the major faults of the region, but the probability is low; (6)The seismic hazards are weak in the region and the surface earthquake fractures are not likely to occur; (7)The first geographic information system of active faults is developed with functions of information query and display, data management, analysis and processing, etc.
基金This research was funded by the 10th Five-Year KeyProject of Fujian Province ,entitled"Exploration of active fault and seismic risk evaluationin cities in Fujian province"
文摘The Zhangzhou basin is located at the middle section of the southeast coast seismic zone of the mainland of China. Using high-resolution refraction and wide-angle reflection/refraction seismic profiling of Zhangzhou basin and its vicinity, we have obtained the crustal geometric structure and velocity structure as well as the geometric configuration and structural relationship between the deep and shallow fractures.The results show that the crust in the region is divided into the upper crust and lower crust. The thickness of the upper crust is 16.5km～18.8km, and that of the lower crust is 12.0km～13.0km. The upper crust is further divided into an upper and lower section. In the lower section of the upper crust, there is a low-velocity layer with a velocity of about 6.00km/s; the depth of the top surface of the low-velocity layer is about 12.0km, and the thickness is about 5.0km. The lower crust is also divided into an upper and lower section. The depth of Moho is 29.0km～31.8km. There are 6 normal faults in the shallow crust in this region, and most of them extend downwards to a depth of less than 4km, the maximum depth is about 5km.Below the shallow normal faults, there is a conjectural high-dip angle deep fault zone. The fault zone extends downwards till the Moho and upwards into the low-velocity layer in lower section of the upper crust. The deep and shallow faults are not tectonically connected. The combination character of deep and shallow structures in the Zhangzhou basin indicates that the Jiulongjiang fault zone is a deep fault zone with distinct characteristics and a complex deep and shallow structure background. The acquisition of deep seismic exploration results obviously enhanced the reliability of explanation of deep-structural data and the exploration precision of the region. The combination of deep and shallow structures resulted in uniform explanation results. The delamination of the crust and the characteristic of the structures are more precise and explicit. We discovered for the first time the combination characteristics of extensional structures and listric faults in the upper crust. This is not only helpful to the integrative judgment of earthquake risk in Zhangzhou and its vicinity, but also of importance for deepening the knowledge of deep dynamic processes in the southeast coast seismic zone.
文摘The Quanzhou basin and its adjacent areas locate in the middle of the southeastern coast seismic belt on the Chinese mainland. The very fine geometry structure of this area from near ground to Moho interface and the relationship between the deep and shallow faults are obtained based on deep seismic reflection profiling. This profile is the first deep seismic reflection profile in this area and it indicates that the crust can be divided into the upper crust and the lower crust and the thickness of crust is from 29.5 km to 31 km in this area. The upper crust and the lower crust can be also divided into two layers. There are shallow normal faults developed in the upper crust and extending to the depth from 6 km to 12 km. The angle of those listric faults decreases with depth and the faults joint into the C1 interface （detachment surface）. There is a high angle fault under the Yong’an-Jinjiang fault belt which cuts off the interface of the upper crust and the lower crust and the Moho interface. Although there is no connection between the shallow and the deep faults, it offers deep structural environment for moderate and strong earthquake because of the deep high angle fault. This exploration result improves the reliability and precision of explanation of deep crustal structure in this area. The pull-apart and listric normal fault model indicates that the upper crust structure accords to the dynamic process of Taiwan Straits. This is helpful for seismicity estimation of Quanzhou and its adjacent area and important for obtaining more of the dynamic process of the southeast coast seismic belt.
基金The research project was sponsored by the NationalDevelopment and ReformCommission of China (20041138) .
文摘Based on detailed logging of fourteen drill holes, combined with the results of other researchers, the preliminary summarization on sedimentary characteristics of the late Pleistocene of the Fuzhou basin is done. The deposition of Fuzhou basin began from about 56.5ka BP and the sediments are composed of gravel, sand, clay and silt, which show a depositional sequence with granularity becoming smaller from the lower to the upper and a big lateral variation of lithology. There are three silt layers in late Quaternary strata of Fuzhou basin. The first and second layers were developed during the middle and late Holocene, the deposition time is about 7.86ka BP to 1.44 ka BP and they are the results of “Changle Transgression". The third was developed during the late of late Pleistocene and the deposition time is from 44ka BP to 20ka BP and it is the result of “Fuzhou Transgression".The buried late Quaternary sediments in Fuzhou basin can be divided into upper Pleistocene series and Holocene series, which include four formations from old to new. They are the Longhai formation (Q^3_pl), Dongshan formation (Qhd), Changle formation (Qhc) and Jiangtian formation (Qhj), respectively. The Longhai formation can be divided into three members and belongs to the Pleistocene series, other three formations belong to the Holocene series.
