Broadband mid-infrared pulse via intra-pulse difference frequency generation based on supercontinuum from multiple thin plates

We report on the generation of optical pulses with a nearly one octave-spanning spectrum ranging from 1300 nm to2500 nm at 1 kHz repetition rate, which are based on intra-pulse difference frequency generation(DFG) in β-barium borate crystal(β-BBO) and passively carrier-envelope-phase(CEP) stabilized. The DFG is induced by few-cycle pulses initiated from spectral broadening in multiple thin plates driven by a Ti: sapphire chirped-pulse amplifier. Furthermore, a numerical simulation is developed to estimate the conversion efficiency and output spectrum of the DFG. Our results show that the pulses from the DFG have the potential for seeding intense mid-infrared(MIR) laser generation and amplification to study strong-field physics and attosecond science.

Biological treatment of wastewater with high concentrations of zinc and sulfate ions from zinc pyrithione synthesis

An enriched and domesticated bacteria consortium of sulfate-reducing bacteria(SRB)was used to treat wastewater from zinc pyrithione(ZPT)production,and the effects of different reaction parameters on sulfate reduction and zinc precipitation were evaluated.The single-factor experimental results showed that the removal rates of Zn2+and24SO?decreased with an increased ZPT concentration ranging from3.0to5.0mg/L.Zn2+and24SO?in wastewater were effectively removed under the conditions of30?35°C,pH7?8and an inoculum concentration of10%?25%.The presence of Fe0in the SRB system enhanced Zn2+and24SO?removal and may increase the resistance of SRB to the toxicity of Zn2+and ZPT in wastewater.A Box?Behnken design was used to evaluate the influence of the main operating parameters on the removal rate of24SO?.The optimum parameter values were found to be pH7.45,33.61°C and ZPT concentration of0.62mg/L,and the removal rate of24SO?reached a maximum of91.62%under these optimum conditions.

Solder paste metamorphism

Solder paste quality can be improved from microstructure and surface status of the solder powder.In this work,the micro-morphology of solder paste was observed and the particle surface condition was analyzed.Also,the conditions of corrosion and the corrosion products in different organic acid groups(activators)were analyzed.The result shows that the SnO passive film on the solder powder surface reacts with the COO-in the active agent of the solder paste.This reaction led the passivation layer to be peeled off.It also caused the change in solder powders’physical and chemical properties and made the metal boundary to be cold-welded.This is the root cause of solder paste exsiccation and deterioration.The study on the details shows that to obtain high-quality solder paste,one of the key methods is using the solder powder with ideal passivation shell structure and defect-free surface.