Parameter identification of Pasternak foundation models(PFM)is never satisfactory,which discourages the application and popularization of PFM.In the present study,an energy-based model to predict the dynamic foundatio...Parameter identification of Pasternak foundation models(PFM)is never satisfactory,which discourages the application and popularization of PFM.In the present study,an energy-based model to predict the dynamic foundation coefficients was proposed using the vibration kinetic energy and potential energy of a Pasternak foundation-rigid plate system.On the basis of the Pasternak foundation,the relationship among the natural frequency,dynamic foundation coefficients,rigid plate configuration,and vibrating soil equivalent mass per unit area was considered.To obtain the natural frequencies of the Pasternak foundation-rigid plate system,dynamic tests were performed.Using two or more dynamic test results of various rigid plates on a foundation,a set of equations of dynamic foundation coefficients was set up to directly identify the foundation coefficients and equivalent mass per unit area of vibrating soil.The feasibility of the proposed method was verified by comparing it with the outdoor and indoor test results and finite element analysis results.When the proposed method is used to obtain the dynamic parameters,PFM can be generalized and applied more widely in engineering practice.展开更多
As a type of nonstructural component, infill walls play a significant role in the seismic behavior of high-rise buildings. However, the stiffness of the infill wall is generally either ignored or considered by simplif...As a type of nonstructural component, infill walls play a significant role in the seismic behavior of high-rise buildings. However, the stiffness of the infill wall is generally either ignored or considered by simplified empirical criteria that lead to a period shortening. The difference can be greatly decreased by using a structural identification methodology. In this study, an ambient vibration test was performed on four on-site reinforced concrete high-rise buildings, and the design results were compared with the PKPM models using corresponding finite element(FE) models. A diagonal strut model was used to simulate the behavior of the infill wall, and the identified modal parameters measured from the on-site test were employed to calibrate the parameters of the diagonal strut in the FE models. The SAP2000 models with calibrated elastic modulus were used to evaluate the seismic response in the elastic state. Based on the load-displacement relationship of the infill wall, nonlinear dynamic analysis models were built in PERFORM-3 D and calibrated using the measured modal periods. The analysis results revealed that the structural performance under small/large earthquake records were both strengthened by infill walls, and the contribution of infill walls should be considered for better accuracy in the design process.展开更多
文摘Parameter identification of Pasternak foundation models(PFM)is never satisfactory,which discourages the application and popularization of PFM.In the present study,an energy-based model to predict the dynamic foundation coefficients was proposed using the vibration kinetic energy and potential energy of a Pasternak foundation-rigid plate system.On the basis of the Pasternak foundation,the relationship among the natural frequency,dynamic foundation coefficients,rigid plate configuration,and vibrating soil equivalent mass per unit area was considered.To obtain the natural frequencies of the Pasternak foundation-rigid plate system,dynamic tests were performed.Using two or more dynamic test results of various rigid plates on a foundation,a set of equations of dynamic foundation coefficients was set up to directly identify the foundation coefficients and equivalent mass per unit area of vibrating soil.The feasibility of the proposed method was verified by comparing it with the outdoor and indoor test results and finite element analysis results.When the proposed method is used to obtain the dynamic parameters,PFM can be generalized and applied more widely in engineering practice.
基金Supported by:National Key Research and Development Program of China under Grant Nos.2016YFC0701400 and 2016YFC0701308the Key Research and Development Program of Hunan Province under Grant No.2017SK2220the National Natural Science Foundation of China(NSFC)under Grant No.51878264
文摘As a type of nonstructural component, infill walls play a significant role in the seismic behavior of high-rise buildings. However, the stiffness of the infill wall is generally either ignored or considered by simplified empirical criteria that lead to a period shortening. The difference can be greatly decreased by using a structural identification methodology. In this study, an ambient vibration test was performed on four on-site reinforced concrete high-rise buildings, and the design results were compared with the PKPM models using corresponding finite element(FE) models. A diagonal strut model was used to simulate the behavior of the infill wall, and the identified modal parameters measured from the on-site test were employed to calibrate the parameters of the diagonal strut in the FE models. The SAP2000 models with calibrated elastic modulus were used to evaluate the seismic response in the elastic state. Based on the load-displacement relationship of the infill wall, nonlinear dynamic analysis models were built in PERFORM-3 D and calibrated using the measured modal periods. The analysis results revealed that the structural performance under small/large earthquake records were both strengthened by infill walls, and the contribution of infill walls should be considered for better accuracy in the design process.