Mg has received much attention as a next-generation implantable material owing to its biocompatibility,bone-like mechanical properties,and biodegradability in physiological environments.The application of various poly...Mg has received much attention as a next-generation implantable material owing to its biocompatibility,bone-like mechanical properties,and biodegradability in physiological environments.The application of various polymer coatings has been conducted in the past to reduce the rapid formation of hydrogen gas and the local change in pH during the initial phase of the chemical reaction with the body fluids.Here,we propose femtosecond(fs)laser-mediated Mg surface patterning for significant enhancement of the binding strength of the coating material,which eventually reduces the corrosion rate.Analyses of the structural,physical,crystallographic,and chemical properties of the Mg surface have been conducted in order to understand the mechanism by which the surface adhesion increases between Mg and the polymer coating layer.Depending on the fs laser conditions,the surface structure becomes rough owing to the presence of several microscaled pits and grooves of nanoporous MgO,resulting in a tightly bonded poly(lactic-co-glycolic acid)(PLGA)layer.The corrosion rate of the PLGA-coated,fs laser-treated Mg is considerably slow compared with the non-treated Mg;the treated Mg is also more biocompatible compared with the non-treated Mg.The fs laser-based surface modification technique offers a simple and quick method for introducing a rough coating on Mg;further,it does not require any chemical treatment,thereby overcoming a potential obstacle for its clinical use.展开更多
Formation of galvanic cells between constituent phases is largely responsible for corrosion in Mg-based alloys.We develop a methodology to calculate the electrochemical potentials of intermetallic compounds and alloys...Formation of galvanic cells between constituent phases is largely responsible for corrosion in Mg-based alloys.We develop a methodology to calculate the electrochemical potentials of intermetallic compounds and alloys using a simple model based on the Born-Haber cycle.Calculated electrochemical potentials are used to predict and control the formation of galvanic cells and minimize corrosion.We demonstrate the applicability of our model by minimizing galvanic corrosion in Mg-3wt%Sr-x Zn alloy by tailoring the Zn composition.The methodology proposed in this work is applicable for any general alloy system and will facilitate efficient design of corrosion resistant alloys.展开更多
During the past decade,there has been extensive research toward the possibility of exploring magnesium and its alloys as biocompatible and biodegradable materials for implantable applications.Its practical medical app...During the past decade,there has been extensive research toward the possibility of exploring magnesium and its alloys as biocompatible and biodegradable materials for implantable applications.Its practical medical application,however,has been limited to specific areas owing to rapid corrosion in the initial stage and the consequent complications.Surface coatings can significantly reduce the initial corrosion of Mg alloys,and several studies have been carried out to improve the adhesion strength of the coating to the surfaces of the alloys.The composition of hydroxyapatite(HAp)is very similar to that of bone tissue;it is one of the most commonly used coating materials for bone-related implants owing to favorable osseointegration post-implantation.In this study,HAp was coated on Mg using nanosecond laser coating,combining the advantages of chemical and physical treatments.Photothermal heat generated in the liquid precursor by the laser improved the adhesion of the coating through the precipitation and growth of HAp at the localized nanosecond laser focal area and increased the corrosion resistance and cell adhesion of Mg.The physical,crystallographic,and chemical bondings were analyzed to explore the mechanism through which the surface adhesion between Mg and the HAp coating layer increased.The applicability of the coating to Mg screws used for clinical devices and improvement in its corrosion property were confirmed.The liquid environment-based laser surface coating technique offers a simple and quick process that does not require any chemical ligands,and therefore,overcomes a potential obstacle in its clinical use.展开更多
Hydroxyapatite,an essential mineral in human bones composed mainly of calcium and phosphorus,is widely used to coat bone graft and implant surfaces for enhanced biocompatibility and bone formation.For a strong implant...Hydroxyapatite,an essential mineral in human bones composed mainly of calcium and phosphorus,is widely used to coat bone graft and implant surfaces for enhanced biocompatibility and bone formation.For a strong implant-bone bond,the bone-forming cells must not only adhere to the implant surface but also move to the surface requiring bone formation.However,strong adhesion tends to inhibit cell migration on the surface of hydroxyapatite.Herein,a cell migration highway pattern that can promote cell migration was prepared using a nanosecond laser on hydroxyapatite coating.The developed surface promoted bone-forming cell movement compared with the unpatterned hydroxyapatite surface,and the cell adhesion and movement speed could be controlled by adjusting the pattern width.Live-cell microscopy,cell tracking,and serum protein analysis revealed the fundamental principle of this phenomenon.These findings are applicable to hydroxyapatite-coated biomaterials and can be implemented easily by laser patterning without complicated processes.The cell migration highway can promote and control cell movement while maintaining the existing advantages of hydroxyapatite coatings.Furthermore,it can be applied to the surface treatment of not only implant materials directly bonded to bone but also various implanted biomaterials implanted that require cell movement control.展开更多
Developing a universal culture platform that manipulates cell fate is one of the most important tasks in the investigation of the role of the cellular microenvironment.This study focuses on the application of topograp...Developing a universal culture platform that manipulates cell fate is one of the most important tasks in the investigation of the role of the cellular microenvironment.This study focuses on the application of topographical and electrical field stimuli to human myogenic precursor cell(hMPC)cultures to assess the influences of the adherent direction,proliferation,and differentiation,and induce preconditioning-induced therapeutic benefits.First,a topographical surface of commercially available culture dishes was achieved by femtosecond laser texturing.The detachable biphasic electrical current system was then applied to the hMPCs cultured on laser-textured culture dishes.Laser-textured topographies were remarkably effective in inducing the assembly of hMPC myotubes by enhancing the orientation of adherent hMPCs compared with flat surfaces.Furthermore,electrical field stimulation through laser-textured topographies was found to promote the expression of myogenic regulatory factors compared with nonstimulated cells.As such,we successfully demonstrated that the combined stimulation of topographical and electrical cues could effectively enhance the myogenic maturation of hMPCs in a surface spatial and electrical field-dependent manner,thus providing the basis for therapeutic strategies.展开更多
基金This work was supported by the National Research Foundation of Korea(NRF)grant funded by the Korea government(MSIT)(No.2020R1A2C2010413)the KIST project(2E30341)。
文摘Mg has received much attention as a next-generation implantable material owing to its biocompatibility,bone-like mechanical properties,and biodegradability in physiological environments.The application of various polymer coatings has been conducted in the past to reduce the rapid formation of hydrogen gas and the local change in pH during the initial phase of the chemical reaction with the body fluids.Here,we propose femtosecond(fs)laser-mediated Mg surface patterning for significant enhancement of the binding strength of the coating material,which eventually reduces the corrosion rate.Analyses of the structural,physical,crystallographic,and chemical properties of the Mg surface have been conducted in order to understand the mechanism by which the surface adhesion increases between Mg and the polymer coating layer.Depending on the fs laser conditions,the surface structure becomes rough owing to the presence of several microscaled pits and grooves of nanoporous MgO,resulting in a tightly bonded poly(lactic-co-glycolic acid)(PLGA)layer.The corrosion rate of the PLGA-coated,fs laser-treated Mg is considerably slow compared with the non-treated Mg;the treated Mg is also more biocompatible compared with the non-treated Mg.The fs laser-based surface modification technique offers a simple and quick method for introducing a rough coating on Mg;further,it does not require any chemical treatment,thereby overcoming a potential obstacle for its clinical use.
基金the Technology Innovation Program(20012502)funded by the Ministry of Trade,Industry and Energy and National Research Foundation of Korea(NRF)Grant funded by Ministry of Science and ICT(MSIT)(NRF-2019R1A2C1089593,NRF2020M3H4A3106736,NRF-2021M3H4A6A01045764)。
文摘Formation of galvanic cells between constituent phases is largely responsible for corrosion in Mg-based alloys.We develop a methodology to calculate the electrochemical potentials of intermetallic compounds and alloys using a simple model based on the Born-Haber cycle.Calculated electrochemical potentials are used to predict and control the formation of galvanic cells and minimize corrosion.We demonstrate the applicability of our model by minimizing galvanic corrosion in Mg-3wt%Sr-x Zn alloy by tailoring the Zn composition.The methodology proposed in this work is applicable for any general alloy system and will facilitate efficient design of corrosion resistant alloys.
基金This work was supported by a National Research Foundation of Korea(NRF)grant funded by the Korean government(MSIT)[grant number 2020R1A2C2010413]Korea Research Council[grant number NRF-2021K1A3A1A74095929]+1 种基金KIST project[grant number 2E31641]KU-KIST Graduate School of Converging Science and Technology Program.
文摘During the past decade,there has been extensive research toward the possibility of exploring magnesium and its alloys as biocompatible and biodegradable materials for implantable applications.Its practical medical application,however,has been limited to specific areas owing to rapid corrosion in the initial stage and the consequent complications.Surface coatings can significantly reduce the initial corrosion of Mg alloys,and several studies have been carried out to improve the adhesion strength of the coating to the surfaces of the alloys.The composition of hydroxyapatite(HAp)is very similar to that of bone tissue;it is one of the most commonly used coating materials for bone-related implants owing to favorable osseointegration post-implantation.In this study,HAp was coated on Mg using nanosecond laser coating,combining the advantages of chemical and physical treatments.Photothermal heat generated in the liquid precursor by the laser improved the adhesion of the coating through the precipitation and growth of HAp at the localized nanosecond laser focal area and increased the corrosion resistance and cell adhesion of Mg.The physical,crystallographic,and chemical bondings were analyzed to explore the mechanism through which the surface adhesion between Mg and the HAp coating layer increased.The applicability of the coating to Mg screws used for clinical devices and improvement in its corrosion property were confirmed.The liquid environment-based laser surface coating technique offers a simple and quick process that does not require any chemical ligands,and therefore,overcomes a potential obstacle in its clinical use.
基金This work was supported by a National Research Foundation of Korea(NRF)grant funded by the Korean government(MSIT)[grant number 2020R1A2C2010413]the Korea Medical Device Development Fund grant funded by the Korea government(the Ministry of Science and ICT,the Ministry of Trade,Industry and Energy,the Ministry of Health&Welfare,the Ministry of Food and Drug Safety)(NTIS Number:9991007189)+1 种基金the KIST project(grant number 2E31121)the KU-KIST Graduate School of Converging Science and Technology Program.
文摘Hydroxyapatite,an essential mineral in human bones composed mainly of calcium and phosphorus,is widely used to coat bone graft and implant surfaces for enhanced biocompatibility and bone formation.For a strong implant-bone bond,the bone-forming cells must not only adhere to the implant surface but also move to the surface requiring bone formation.However,strong adhesion tends to inhibit cell migration on the surface of hydroxyapatite.Herein,a cell migration highway pattern that can promote cell migration was prepared using a nanosecond laser on hydroxyapatite coating.The developed surface promoted bone-forming cell movement compared with the unpatterned hydroxyapatite surface,and the cell adhesion and movement speed could be controlled by adjusting the pattern width.Live-cell microscopy,cell tracking,and serum protein analysis revealed the fundamental principle of this phenomenon.These findings are applicable to hydroxyapatite-coated biomaterials and can be implemented easily by laser patterning without complicated processes.The cell migration highway can promote and control cell movement while maintaining the existing advantages of hydroxyapatite coatings.Furthermore,it can be applied to the surface treatment of not only implant materials directly bonded to bone but also various implanted biomaterials implanted that require cell movement control.
基金supported by a Korean National Research Foundation(NRF)grant funded by the Korea government(MSIT)(No.2017M3A9G1027929)supported by both the National Research Council of Science&Technology 424(NST)grant by the Korean government(MSIP)(CAP-17-01-KIST Europe)KIST project(2E31121).
文摘Developing a universal culture platform that manipulates cell fate is one of the most important tasks in the investigation of the role of the cellular microenvironment.This study focuses on the application of topographical and electrical field stimuli to human myogenic precursor cell(hMPC)cultures to assess the influences of the adherent direction,proliferation,and differentiation,and induce preconditioning-induced therapeutic benefits.First,a topographical surface of commercially available culture dishes was achieved by femtosecond laser texturing.The detachable biphasic electrical current system was then applied to the hMPCs cultured on laser-textured culture dishes.Laser-textured topographies were remarkably effective in inducing the assembly of hMPC myotubes by enhancing the orientation of adherent hMPCs compared with flat surfaces.Furthermore,electrical field stimulation through laser-textured topographies was found to promote the expression of myogenic regulatory factors compared with nonstimulated cells.As such,we successfully demonstrated that the combined stimulation of topographical and electrical cues could effectively enhance the myogenic maturation of hMPCs in a surface spatial and electrical field-dependent manner,thus providing the basis for therapeutic strategies.