Quasi-static and compressive fatigue tests on the closed cell Al-Si-Ca alloy foam specimens with three different aspect ratios were performed. It turned out that the onset of cyclic shortening of foam with a lower asp...Quasi-static and compressive fatigue tests on the closed cell Al-Si-Ca alloy foam specimens with three different aspect ratios were performed. It turned out that the onset of cyclic shortening of foam with a lower aspect ratio took place earlier and the fatigue strength was lower compared with the specimen with a higher aspect ratio, although all the dimensions of specimen satisfied the seven times the cell size criterion, while the quasi-static stress-strain curves were almost same having same Young＇s modulus, yield stress and plateau stress. Therefore, the seven times the cell size criterion for the quasi-static compression behavior was not applicable to the fatigue analysis of Al-Si-Ca alloy foam.展开更多
The permanent residual strain in aluminum （Al） alloy foams induced by compressive fatigue gradually increases with the increasing number of loading cycles. Consequently, the progressive shortening of Al-alloy foam d...The permanent residual strain in aluminum （Al） alloy foams induced by compressive fatigue gradually increases with the increasing number of loading cycles. Consequently, the progressive shortening of Al-alloy foam degrades the dynamic material performance by the failure and ratcheting of multi-cells in the foam. In this paper, the dynamic properties of Al-alloy foams damaged by compressive fatigue were studied. The beam specimens with various residual strains were made by cyclic compression-compression stress. The dynamic bending modulus and loss factor were evaluated by using a beam transfer function method. As a result, the dynamic bending stiffness of Al-alloy foam turned out to be decreased due to damage while the loss factor was improved because of the increasing energy dissipation of such factors as cracked cell walls formed during the shortening process of the foam. The loss factor shows a manifest dependence on the fatigue residual strain.展开更多
基金supported by Chungnam Automotive Technology Education Center(NURI)and BK 21.
文摘Quasi-static and compressive fatigue tests on the closed cell Al-Si-Ca alloy foam specimens with three different aspect ratios were performed. It turned out that the onset of cyclic shortening of foam with a lower aspect ratio took place earlier and the fatigue strength was lower compared with the specimen with a higher aspect ratio, although all the dimensions of specimen satisfied the seven times the cell size criterion, while the quasi-static stress-strain curves were almost same having same Young＇s modulus, yield stress and plateau stress. Therefore, the seven times the cell size criterion for the quasi-static compression behavior was not applicable to the fatigue analysis of Al-Si-Ca alloy foam.
基金Chungnam Automotive Technology Education Center (NURI).
文摘The permanent residual strain in aluminum （Al） alloy foams induced by compressive fatigue gradually increases with the increasing number of loading cycles. Consequently, the progressive shortening of Al-alloy foam degrades the dynamic material performance by the failure and ratcheting of multi-cells in the foam. In this paper, the dynamic properties of Al-alloy foams damaged by compressive fatigue were studied. The beam specimens with various residual strains were made by cyclic compression-compression stress. The dynamic bending modulus and loss factor were evaluated by using a beam transfer function method. As a result, the dynamic bending stiffness of Al-alloy foam turned out to be decreased due to damage while the loss factor was improved because of the increasing energy dissipation of such factors as cracked cell walls formed during the shortening process of the foam. The loss factor shows a manifest dependence on the fatigue residual strain.
