Precipitation was carried out to obtain manganese carbonate by adding a precipitating agent, sodium carbonate (NaCO<sub>3</sub>). This was followed by calcination of the manganese carbonate (MnCO<sub>...Precipitation was carried out to obtain manganese carbonate by adding a precipitating agent, sodium carbonate (NaCO<sub>3</sub>). This was followed by calcination of the manganese carbonate (MnCO<sub>3</sub>) to obtain manganese dioxide (MnO<sub>2</sub>). For precipitation tests, a pH ranging from 8 to 10, a time of one to two hours, and a temperature of 25°C and 50°C are the parameters that are considered. The calcination of MnCO<sub>3</sub> is carried out under the following conditions: time (1, 2, 3, and 4 hours) and temperature (370°C, 420°C, and 470°C). It should be noted that the temperature range selected for the calcination tests is based on thermodynamic data obtained using the HSC CHEMISTRY software. The results obtained show an effective recovery of manganese at 25°C, in one hour, with a pH of 8.5 with a precipitation yield and manganese content in the precipitate around 98.43% and 24.21%, respectively. During calcination tests, results show an increase in mass loss, for a constant calcination time, as temperature increases. On the other hand, increasing the calcination time at a given temperature causes an increase in mass loss. However, a significant decrease in mass loss is noted at 3 hours of calcination. The highest mass loss is obtained at a temperature of 470°C after 4 hours of calcination.展开更多
文摘Precipitation was carried out to obtain manganese carbonate by adding a precipitating agent, sodium carbonate (NaCO<sub>3</sub>). This was followed by calcination of the manganese carbonate (MnCO<sub>3</sub>) to obtain manganese dioxide (MnO<sub>2</sub>). For precipitation tests, a pH ranging from 8 to 10, a time of one to two hours, and a temperature of 25°C and 50°C are the parameters that are considered. The calcination of MnCO<sub>3</sub> is carried out under the following conditions: time (1, 2, 3, and 4 hours) and temperature (370°C, 420°C, and 470°C). It should be noted that the temperature range selected for the calcination tests is based on thermodynamic data obtained using the HSC CHEMISTRY software. The results obtained show an effective recovery of manganese at 25°C, in one hour, with a pH of 8.5 with a precipitation yield and manganese content in the precipitate around 98.43% and 24.21%, respectively. During calcination tests, results show an increase in mass loss, for a constant calcination time, as temperature increases. On the other hand, increasing the calcination time at a given temperature causes an increase in mass loss. However, a significant decrease in mass loss is noted at 3 hours of calcination. The highest mass loss is obtained at a temperature of 470°C after 4 hours of calcination.
