Stable overall water splitting in an asymmetric acid/ alkaline electrolyzer comprising a bipolar membrane sandwiched by bifunctional cobalt-nickel phosphide nanowire electrodes

Water splitting has been proposed to be a promising approach to producing clean hydrogen fuel.The two half-reactions of water splitting,that is,the hydrogen evolution reaction(HER)and oxygen evolution reaction(OER),take place kinetically fast in solutions with completely different pH values.Enabling HER and OER to simultaneously occur under kinetically favorable conditions while using exclusively low-cost,earth-abundant electrocatalysts is highly desirable but remains a challenge.Herein,we demonstrate that using a bipolar membrane(BPM)we can accomplish HER in a strongly acidic solution and OER in a strongly basic solution,with bifunctional self-supported cobaltnickel phosphide nanowire electrodes to catalyze both reactions.Such asymmetric acid/alkaline water electrolysis can be achieved at 1.567 V to deliver a current density of 10 mA/cm2 with ca.100%Faradaic efficiency.Moreover,using an“irregular”BPM with unintentional crossover the voltage needed to afford 10 mA/cm2 can be reduced to 0.847 V,due to the assistance of electrochemical neutralization between acid and alkaline.Furthermore,we show that BPM-based asymmetric water electrolysis can be accomplished in a circulated single-cell electrolyzer delivering 10 mA/cm2 at 1.550 V and splitting water very stably for at least 25 hours,and that water electrolysis is enabled by a solar panel operating at 0.908 V(@13 mA/cm2),using an“irregular”BPM.BPMbased asymmetric water electrolysis is a promising alternative to conventional proton and anion exchange membrane water electrolysis.

Easy preparation of multifunctional ternary PdNiP/C catalysts toward enhanced small organic molecule electro-oxidation and hydrogen evolution reactions

The small organic molecule electro-oxidation(OMEO) and the hydrogen evolution(HER) are two important half-reactions in direct liquid fuel cells(DLFCs) and water electrolyzers,respectively,whose performance is largely hindered by the low activity and poor stability of electrocatalysts.Herein,we demonstrate that a simple phosphorization treatment of commercially available palladium-nickel(PdNi) catalysts results in multifunctional ternary palladium nickel phosphide(PdNiP) catalysts,which exhibit substantially enhanced electrocatalytic activity and stability for HER and OMEO of a number of molecules including formic acid,methanol,ethanol,and ethylene glycol,in acidic and/or alkaline media.The improved performance results from the modification of electronic structure of palladium and nickel by the introduced phosphorus and the enhanced corrosion resistance of PdNiP.The simple phosphorization approach reported here allows for mass production of highly-active OMEO and HER electrocatalysts,holding substantial promise for their large-scale application in direct liquid fuel cells and water electrolyzers.

Conformal and continuous deposition of bifunctional cobalt phosphide layers on p-silicon nanowire arrays for improved solar hydrogen evolution

Vertically aligned p-silicon nanowire （SiNW） arrays have been extensively investigated in recent years as promising photocathodes for solar-driven hydrogen evolution. However, the fabrication of SiNW photocathodes with both high photoelectrocatalytic activity and long-term operational stability using a simple and affordable approach is a challenging task. Herein, we report conformal and continuous deposition of a di-cobalt phosphide （C02P） layer on lithography- patterned highly ordered SiNW arrays via a cost-effective drop-casting method followed by a low-temperature phosphorization treatment. The as-deposited C02P layer consists of crystalline nanoparticles and has an intimate contact with SiNWs, forming a well-defined SiNW@Co2P core/shell nanostructure. The conformal and continuous Co2P layer functions as a highly efficient catalyst capable of substantially improving the photoelectrocatalytic activity for the hydrogen evolution reaction （HER） and effectively passivates the SiNWs to protect them from photo-oxidation, thus prolonging the lifetime of the electrode. As a consequence, the SiNW@Co2P photocathode with an optimized C02P layer thickness exhibits a high photocurrent density of -21.9 mA·cm^-2 at 0 V versus reversible hydrogen electrode and excellent operational stability up to 20 h for solar-driven hydrogen evolution, outperforming many nanostructured silicon photocathodes reported in the literature. The combination of passivation and catalytic functions in a single continuous layer represents a promising strategy for designing high-performance semiconductor photoelectrodes for use in solar-driven water splitting, which may simplify fabrication procedures and potentially reduce production costs.