The sensing of a flame can be performed by using wide-bandgap semiconductors, which offer a high signal-to-noise ratio since they only response the ultraviolet emission in the flame. Diamond is a robust semiconductor ...The sensing of a flame can be performed by using wide-bandgap semiconductors, which offer a high signal-to-noise ratio since they only response the ultraviolet emission in the flame. Diamond is a robust semiconductor with a wide-bandgap of 5.5 e V, exhibiting an intrinsic solar-blindness for deep-ultraviolet(DUV) detection. In this work, by using a submicron thick boron-doped diamond epilayer grown on a type-Ib diamond substrate, a Schottky photodiode device structure- based flame sensor is demonstrated. The photodiode exhibits extremely low dark current in both forward and reverse modes due to the holes depletion in the epilayer. The photodiode has a photoconductivity gain larger than 100 and a threshold wavelength of 330 nm in the forward bias mode. CO and OH emission bands with wavelengths shorter than 330 nm in a flame light are detected at a forward voltage of-10 V. An alcohol lamp flame in the distance of 250 mm is directly detected without a focusing lens of flame light.展开更多
The collective interaction between intense ion beams and plasmas is studied by simulations and experiments,where an intense proton beam produced by a short pulse laser is injected into a pre-ionized gas.It is found th...The collective interaction between intense ion beams and plasmas is studied by simulations and experiments,where an intense proton beam produced by a short pulse laser is injected into a pre-ionized gas.It is found that,depending on its current density,collective effects can significantly alter the propagated ion beam and the stopping power.The quantitative agreement that is found between theories and experiments constitutes the first validation of the collective interaction theory.The effects in the interaction between intense ion beams and background gas plasmas are of importance for the design of laser fusion reactors as well as for beam physics.展开更多
基金supported by Grant-in-Aid for Scientific Research in the Ministry of Education,Culture,Sports,Science and Technology of the Japanese Government(No.18360341)
文摘The sensing of a flame can be performed by using wide-bandgap semiconductors, which offer a high signal-to-noise ratio since they only response the ultraviolet emission in the flame. Diamond is a robust semiconductor with a wide-bandgap of 5.5 e V, exhibiting an intrinsic solar-blindness for deep-ultraviolet(DUV) detection. In this work, by using a submicron thick boron-doped diamond epilayer grown on a type-Ib diamond substrate, a Schottky photodiode device structure- based flame sensor is demonstrated. The photodiode exhibits extremely low dark current in both forward and reverse modes due to the holes depletion in the epilayer. The photodiode has a photoconductivity gain larger than 100 and a threshold wavelength of 330 nm in the forward bias mode. CO and OH emission bands with wavelengths shorter than 330 nm in a flame light are detected at a forward voltage of-10 V. An alcohol lamp flame in the distance of 250 mm is directly detected without a focusing lens of flame light.
基金We acknowledge the support of the LULI technical teams and support from Grant No.E1127 from Region Ile-de-France.S.N.C is supported by the National Science Foundation under Grant No.OISE-1064468This work was partly done within the LABEX Plas@Par project and supported by Grant No.11-IDEX-0004-02 and ANR-17-CE30-0026-Pinnacle from Agence Nationale de la Recherche+2 种基金It has received funding from the European Union's Horizon 2020 Research and Innovation programme under LASERLAB-EUROPE grant agreement No.654148 Laserlab-EuropeThis work has been carried out within the framework of the EUROfusion Consortium and has received funding,through the ToIFE,from the European Union's Horizon 2020 research and innovation programme under Grant Agreement No.633053The views and opinions expressed herein do not necessarily reflect those of the European Commission.This work was also supported in part by JSPS KAKENHI Grant No.15H03758.
文摘The collective interaction between intense ion beams and plasmas is studied by simulations and experiments,where an intense proton beam produced by a short pulse laser is injected into a pre-ionized gas.It is found that,depending on its current density,collective effects can significantly alter the propagated ion beam and the stopping power.The quantitative agreement that is found between theories and experiments constitutes the first validation of the collective interaction theory.The effects in the interaction between intense ion beams and background gas plasmas are of importance for the design of laser fusion reactors as well as for beam physics.