Shock compression and spallation damage of a face-center cubic phase high-entropy alloy(HEA)Al_(0.1)CoCrFeNi were investigated via plate impact experiments along with free surface velocity measurements.Postmortem samp...Shock compression and spallation damage of a face-center cubic phase high-entropy alloy(HEA)Al_(0.1)CoCrFeNi were investigated via plate impact experiments along with free surface velocity measurements.Postmortem samples were characterized with transmission electron microscopy and electron backscatter diffraction.The Hugoniot equation of state and spall strength at different impact strengths were determined.There exists a power-law relation between spall strength and strain rate.The spall strength of Al_(0.1)CoCrFeNi HEA is about 50%higher than those of previously studied HEAs and comparable to those widely applied structural stainless steels at the same shock stress.Dislocation glide and stacking faults are the important deformation mechanisms in the Al_(0.1)CoCrFeNi HEA.Nanotwins are only observed at high shock stress.Damage in the Al_(0.1)CoCrFeNi HEA is ductile in nature.Voids are nucleated preferentially in grain interiors,and the intragranular voids show a strong dependence on grain boundary misorientation and peak stress.展开更多
Multiple ballistic impacts are carried out on a 2024-T4 aluminum alloy by spherical steel projectiles(5-mm diameter)at~400 m s^(-1),to investigate its dynamic deformation and damage.The ballistic impact process is cap...Multiple ballistic impacts are carried out on a 2024-T4 aluminum alloy by spherical steel projectiles(5-mm diameter)at~400 m s^(-1),to investigate its dynamic deformation and damage.The ballistic impact process is captured with high-speed photography.Postmortem samples are characterized with optical imaging,three-dimensional laser scanning,microhardness testing and electron backscatter diffraction.With increasing number of impacts,crater diameter increases slightly,but crater depth and crater volume increase significantly,and strain accumulation leads to microhardness increase overall.Crater parameters all follow power-law relations with the number of impacts.Twin-like deformation bands and macroscopic deformation twins are produced by impact as a result of spontaneous dislocation self-pinning under high strain rate,large shear deformation.Under multiple impacts,shear strain accumulation in the arc-shaped region of the crater induces deformation twinning when it exceeds a critical value(~1.1-1.6).It is highly possible that the deformation twins are related to deformation bands,since they both share one set of the{111}pole with the initial matrix grain.A finite element method model is optimized to reproduce experimental observations and interpret deformation mechanisms.展开更多
基金financially supported in part by the Sichuan Province Key R&D Program(No.2022YFG0033)the National Natural Science Foundation of China(Nos.11627901 and11902274)。
文摘Shock compression and spallation damage of a face-center cubic phase high-entropy alloy(HEA)Al_(0.1)CoCrFeNi were investigated via plate impact experiments along with free surface velocity measurements.Postmortem samples were characterized with transmission electron microscopy and electron backscatter diffraction.The Hugoniot equation of state and spall strength at different impact strengths were determined.There exists a power-law relation between spall strength and strain rate.The spall strength of Al_(0.1)CoCrFeNi HEA is about 50%higher than those of previously studied HEAs and comparable to those widely applied structural stainless steels at the same shock stress.Dislocation glide and stacking faults are the important deformation mechanisms in the Al_(0.1)CoCrFeNi HEA.Nanotwins are only observed at high shock stress.Damage in the Al_(0.1)CoCrFeNi HEA is ductile in nature.Voids are nucleated preferentially in grain interiors,and the intragranular voids show a strong dependence on grain boundary misorientation and peak stress.
基金supported by the Scientific Challenge Project of China(Grant No.TZ2018001)the National Natural Science Foundation of China(Grant Nos.11627901,11802252)the Science and Technology Program of Sichuan Province(Grant No.2020YFG0415)。
文摘Multiple ballistic impacts are carried out on a 2024-T4 aluminum alloy by spherical steel projectiles(5-mm diameter)at~400 m s^(-1),to investigate its dynamic deformation and damage.The ballistic impact process is captured with high-speed photography.Postmortem samples are characterized with optical imaging,three-dimensional laser scanning,microhardness testing and electron backscatter diffraction.With increasing number of impacts,crater diameter increases slightly,but crater depth and crater volume increase significantly,and strain accumulation leads to microhardness increase overall.Crater parameters all follow power-law relations with the number of impacts.Twin-like deformation bands and macroscopic deformation twins are produced by impact as a result of spontaneous dislocation self-pinning under high strain rate,large shear deformation.Under multiple impacts,shear strain accumulation in the arc-shaped region of the crater induces deformation twinning when it exceeds a critical value(~1.1-1.6).It is highly possible that the deformation twins are related to deformation bands,since they both share one set of the{111}pole with the initial matrix grain.A finite element method model is optimized to reproduce experimental observations and interpret deformation mechanisms.