期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
含Mg夹杂物对低合金高强度钢CGHAZ韧性的影响 被引量:4
1
作者 吉梅锋 胡锋 +1 位作者 张莉芹 吴开明 《钢铁研究学报》 CAS CSCD 北大核心 2021年第12期1278-1288,共11页
采用Ca、Mg处理工艺研究不同夹杂物粒子对200 kJ/cm大线能量焊接低合金高强度钢CGHAZ冲击韧性的影响,对各个试样CGHAZ的显微组织,晶粒尺寸和冲击功进行观察和分析。试验结果表明,在低合金高强度钢CGHAZ中,Mg处理钢的冲击性能明显高于Ca... 采用Ca、Mg处理工艺研究不同夹杂物粒子对200 kJ/cm大线能量焊接低合金高强度钢CGHAZ冲击韧性的影响,对各个试样CGHAZ的显微组织,晶粒尺寸和冲击功进行观察和分析。试验结果表明,在低合金高强度钢CGHAZ中,Mg处理钢的冲击性能明显高于Ca处理钢,主要原因是含Mg夹杂物粒子析出能力比含Ca夹杂物粒子强,在焊接过程中,含Mg夹杂物粒子对CGHAZ组织的钉扎作用更加显著;同时提高针状铁素体的含量,延长裂纹扩展路径,提高断裂时吸收的能量,使样品韧性得到提升。 展开更多
关键词 大线能量焊接 夹杂物 焊接热影响粗晶区 冲击韧性
原文传递
Evaluation on Salt Tolerance of 25 Species of Poplar Cuttings in Lab 被引量:1
2
作者 ji meifeng YIN jiandao +2 位作者 LIU Zhenying HUO jia’nan GUO Rui 《Chinese Forestry Science and Technology》 2011年第3期39-49,共11页
The growth and morphological characteristics of 25 species of poplar were investigated. The cuttings were cultivated in Hoagland Nutrient Solution, which was made with sodium chloride (NaCl) solutions of concentration... The growth and morphological characteristics of 25 species of poplar were investigated. The cuttings were cultivated in Hoagland Nutrient Solution, which was made with sodium chloride (NaCl) solutions of concentration of 1.00, 3.00, 4.00, 5.00, 6.00, and 8.00 g/L, respectively. Under such salt stress, the new branch length and biomass accumulation of cuttings decreased as the salt concentration increased. The root/shoot ratio of most of species showed an escalation and then reduction tendency. Under low concentration of salt (NaCl ≤4.00 g/L), the root/shoot ratio of 11 species increased, compared to NaCl =1.00 g/L. After salt treatments, with the increase of salinity concentration, the content of chlorophyll of 8 species decreased. Based on the analysis of growth and morphological appearance, it turned out that 6 species had high salt-tolerant, 7 species were moderate salt-tolerant, 7 species were low salt-tolerant and 5 species failed to resist salt stress. 展开更多
关键词 POPLAR salt stress hydroponic experiment salt tolerance
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部