The ratio of P- to S-wave velocities (Vp/Vs) is regarded as one of the most diagnostic properties of natural rocks. It has been used as a discriminant of composition for the continental crust and provides valuable c...The ratio of P- to S-wave velocities (Vp/Vs) is regarded as one of the most diagnostic properties of natural rocks. It has been used as a discriminant of composition for the continental crust and provides valuable constraints on its formation and evolution processes. Furthermore, the spatial and temporal changes in Vp/Vs before and after earthquakes are probably the most promising avenue to understanding the source mechanics and possibly predicting earthquakes. Here we calibrate the variations in Vp/Vs in dry, anisotropic crustal rocks and provide a set of basic information for the interpretation of future seismic data from the Wenchuan earthquake Fault zone Scientific Drilling (WFSD) project and other surveys. Vp/Vs is a constant (Ф0) for an isotropic rock. However, most of crustal rocks are anisotropic due to lattice-preferred orientations of anisotropic minerals (e.g., mica, amphibole, plagioclase and pyroxene) and cracks as well as thin compositional layering. The Vp/Vs ratio of an anisotropic rock measured along a selected pair of propagation-vibration directions is an apparent value (Фy) that is significantly different from the value for its isotropic counterpart (Ф0). The usefulness of apparent Vp/Vs ratios as a diagnostic of crustal composition depends largely on rock seismic anisotropy. A 5% of P- and S-wave velocity anisotropy is sufficient to make it impossible to determine the crustal composition using the conventional criteria (Vp/Vs≤1.756 for felsic rocks, 1.756〈Vp/Vs≤1.809 for intermediate rocks, 1.809〈Vp/Vs≤1.944 for mafic rocks, and Vp/V2〉1.944 fluidfilled porous/fractured or partially molten rocks) if the information about the wave propagation-polarization directions with respect to the tectonic framework is unknown. However, the variations in Vp/Vs measured from borehole seismic experiments can be readily interpreted according to the orientations of the ray path and the polarization of the shear waves with respect to the present-day principal stress directions (i.e., the orientation of cracks) and the frozen fabric (i.e., foliation and lineation).展开更多
Lame modulus (λ) and shear modulus (μ) are among the most important, intrinsic, elastic constants of rocks. Using 7. and μ could be much more advantageous than using P- and S-wave velocities (Vp and Vs). Here...Lame modulus (λ) and shear modulus (μ) are among the most important, intrinsic, elastic constants of rocks. Using 7. and μ could be much more advantageous than using P- and S-wave velocities (Vp and Vs). Here we quantified these equivalent isotropic elastic moduli for 115 representative rocks from the ultrahigh pressure (UHP) metamorphic terrane of the Dabie-Sulu orogenic belt (China) and their variations with pressure (P), temperature (T), density (p), Vp, Vs and mineralogical composition. Both moduli increase nonlinearly and linearly with increasing pressure at low (〈200-300 MPa) and high (〉200-300 MPa) pressures, respectively. In the regime of high pressures, 7. and IX decrease quasi-linearly with increasing temperature with temperature derivatives dλ/dT and dμ/dT generally in the range of -10×10-3 to -1×10-3 GPa/℃. Dehydration of water-bearing minerals such as serpentine in peridotites and chlorite in retrograde eciogites results in an abrupt drop in 7. while μ remains almost unchanged. In Z-p, μ-p and 7.-IX plots, the main categories of UHP rocks can be characterized. Serpentinization leads to significant decreases in μ and 7. as serpentine has extremely low values of Z, μ and p. Eclogites, common mafic rocks (mafic gneiss, metagabbro and amphibolite), and felsic rocks (orthogneiss and paragneiss) have high, moderate and low μ and λ values, respectively. For pyroxenes and olivines, λ increases but μ decreases with increasing Fe/Mg ratios. For plagioclase feldspars, both Z and μ exhibit a significant positive correlation with anorthite content. SiO2-rich felsic rocks and quartzites are deviated remarkably from the general trend lines of the acid-intermediate-mafic rocks in Vs-p, μ-p, λ-Vp,λ-Vs and μ-λ diagrams because quartz has extremely low λ (-8.1 GPa) and p (2.65 g/cm3) but moderate μ (44.4 GPa) values. Increasing the contents of garnet, rutile, ilmenite and magnetite results in a significant increase in the λ and μ values of the UHP metamorphic rocks. However, either λ or μ is insensitive to the compositional variations for pyralspite (pyrope-almandine-spessartine) solution series. The results provide potentially improved constraints on characterization of crustal composition based on the elastic properties of rocks and in situ seismic data from deep continental roots.展开更多
Although the Indus-Tsangpo Suture(ITS) is the most spectacular thrust system of continent-continent collision in the world, fundamental questions about its strength evolution and deformation behavior transition remain...Although the Indus-Tsangpo Suture(ITS) is the most spectacular thrust system of continent-continent collision in the world, fundamental questions about its strength evolution and deformation behavior transition remain unanswered. Here we reported, for the first time, frictional melting-induced pseudotachylytes in the intensively deformed felsic rocks along the ITS zone in southern Tibet. This study reveals that pseudotachylytes induced profound weakness of the boundary fault between Indian and Asian plates. The intrinsically low strength of the foliated microlites crystallized from frictional melt or glass(i.e., pseudotachylyte) at seismogenic depths compared with the surrounding coarse-grained quartzofeldspathic rocks in the brittle and semi-brittle regime is sufficient to explain the localization of shear strain, the development of ductile shear zones embedded in strong wall rocks, and the transition from the strong to weak fault behaviors without invoking the presence of high fluid pressure or low friction coefficient metasomatic materials(e.g., smectite or lizardite) within the faults.展开更多
基金funded by the Natural Sciences and Engineering Council of Canada and the Geological Survey of China
文摘The ratio of P- to S-wave velocities (Vp/Vs) is regarded as one of the most diagnostic properties of natural rocks. It has been used as a discriminant of composition for the continental crust and provides valuable constraints on its formation and evolution processes. Furthermore, the spatial and temporal changes in Vp/Vs before and after earthquakes are probably the most promising avenue to understanding the source mechanics and possibly predicting earthquakes. Here we calibrate the variations in Vp/Vs in dry, anisotropic crustal rocks and provide a set of basic information for the interpretation of future seismic data from the Wenchuan earthquake Fault zone Scientific Drilling (WFSD) project and other surveys. Vp/Vs is a constant (Ф0) for an isotropic rock. However, most of crustal rocks are anisotropic due to lattice-preferred orientations of anisotropic minerals (e.g., mica, amphibole, plagioclase and pyroxene) and cracks as well as thin compositional layering. The Vp/Vs ratio of an anisotropic rock measured along a selected pair of propagation-vibration directions is an apparent value (Фy) that is significantly different from the value for its isotropic counterpart (Ф0). The usefulness of apparent Vp/Vs ratios as a diagnostic of crustal composition depends largely on rock seismic anisotropy. A 5% of P- and S-wave velocity anisotropy is sufficient to make it impossible to determine the crustal composition using the conventional criteria (Vp/Vs≤1.756 for felsic rocks, 1.756〈Vp/Vs≤1.809 for intermediate rocks, 1.809〈Vp/Vs≤1.944 for mafic rocks, and Vp/V2〉1.944 fluidfilled porous/fractured or partially molten rocks) if the information about the wave propagation-polarization directions with respect to the tectonic framework is unknown. However, the variations in Vp/Vs measured from borehole seismic experiments can be readily interpreted according to the orientations of the ray path and the polarization of the shear waves with respect to the present-day principal stress directions (i.e., the orientation of cracks) and the frozen fabric (i.e., foliation and lineation).
基金supported by the Sino Probe-deep exploration in Ministry of land and Resources of China(Sino Probe-07)the knowledge Innovation Program from Guangzhou Institute of Geochemistry,the Chinese Academy of Sciences(GIGCX-09-02)+1 种基金This is contribution No.IS-1386 from GIGCASthe Natural Sciences and Engineering Council of Canada and the Chinese Academy of Geological Sciences for the discovery and research grants(No.1212011121274)
文摘Lame modulus (λ) and shear modulus (μ) are among the most important, intrinsic, elastic constants of rocks. Using 7. and μ could be much more advantageous than using P- and S-wave velocities (Vp and Vs). Here we quantified these equivalent isotropic elastic moduli for 115 representative rocks from the ultrahigh pressure (UHP) metamorphic terrane of the Dabie-Sulu orogenic belt (China) and their variations with pressure (P), temperature (T), density (p), Vp, Vs and mineralogical composition. Both moduli increase nonlinearly and linearly with increasing pressure at low (〈200-300 MPa) and high (〉200-300 MPa) pressures, respectively. In the regime of high pressures, 7. and IX decrease quasi-linearly with increasing temperature with temperature derivatives dλ/dT and dμ/dT generally in the range of -10×10-3 to -1×10-3 GPa/℃. Dehydration of water-bearing minerals such as serpentine in peridotites and chlorite in retrograde eciogites results in an abrupt drop in 7. while μ remains almost unchanged. In Z-p, μ-p and 7.-IX plots, the main categories of UHP rocks can be characterized. Serpentinization leads to significant decreases in μ and 7. as serpentine has extremely low values of Z, μ and p. Eclogites, common mafic rocks (mafic gneiss, metagabbro and amphibolite), and felsic rocks (orthogneiss and paragneiss) have high, moderate and low μ and λ values, respectively. For pyroxenes and olivines, λ increases but μ decreases with increasing Fe/Mg ratios. For plagioclase feldspars, both Z and μ exhibit a significant positive correlation with anorthite content. SiO2-rich felsic rocks and quartzites are deviated remarkably from the general trend lines of the acid-intermediate-mafic rocks in Vs-p, μ-p, λ-Vp,λ-Vs and μ-λ diagrams because quartz has extremely low λ (-8.1 GPa) and p (2.65 g/cm3) but moderate μ (44.4 GPa) values. Increasing the contents of garnet, rutile, ilmenite and magnetite results in a significant increase in the λ and μ values of the UHP metamorphic rocks. However, either λ or μ is insensitive to the compositional variations for pyralspite (pyrope-almandine-spessartine) solution series. The results provide potentially improved constraints on characterization of crustal composition based on the elastic properties of rocks and in situ seismic data from deep continental roots.
基金supported by the National Natural Science Foundation of China(No.40921001 and No.40921001)the Geological Survey of China(No.1212010818094)to Xuthe Natural Sciences and Engineering Research Council of Canada to Ji
文摘Although the Indus-Tsangpo Suture(ITS) is the most spectacular thrust system of continent-continent collision in the world, fundamental questions about its strength evolution and deformation behavior transition remain unanswered. Here we reported, for the first time, frictional melting-induced pseudotachylytes in the intensively deformed felsic rocks along the ITS zone in southern Tibet. This study reveals that pseudotachylytes induced profound weakness of the boundary fault between Indian and Asian plates. The intrinsically low strength of the foliated microlites crystallized from frictional melt or glass(i.e., pseudotachylyte) at seismogenic depths compared with the surrounding coarse-grained quartzofeldspathic rocks in the brittle and semi-brittle regime is sufficient to explain the localization of shear strain, the development of ductile shear zones embedded in strong wall rocks, and the transition from the strong to weak fault behaviors without invoking the presence of high fluid pressure or low friction coefficient metasomatic materials(e.g., smectite or lizardite) within the faults.