The effect of hot band annealing processes,namely simulating batch annealing and continuous annealing,on microstructure,texture,grain boundary character and r-value of ferritic stainless steel was investigated.The hot...The effect of hot band annealing processes,namely simulating batch annealing and continuous annealing,on microstructure,texture,grain boundary character and r-value of ferritic stainless steel was investigated.The hot band displayed a highly elongated ribbon-like structure and a pronounced deformation texture.The fully recrystallized grains were observed after continuous annealing while the ＂typical＂ hot rolled structure was remained after batch annealing.Also,the α-fibre texture formed during hot rolling almost disappeared after continuous annealing and a weak γ-fibre texture was obtained.By contract,the α-fibre texture remained very stable after batch annealing.After cold rolling and recrystallization annealing,the favorable γ-fibre texture was achieved in the continuous annealed steel.Instead of forming the γ-fibre texture,the recrystallization texture was notably shifted toward {223}〈582〉 in the batch annealed steel.Finally,the improvement in drawability with high r-value and low Δr-value were also displayed in sheet through the initial continuous annealing process.展开更多
A new resource-saving duplex stainless steel with composition of 19Cr-6Mn-1.0Mo-0.5Ni-0.5W-0.5Cu-0.2N has been developed,and the microstructure,mechanical properties and corrosion properties have been investigated.The...A new resource-saving duplex stainless steel with composition of 19Cr-6Mn-1.0Mo-0.5Ni-0.5W-0.5Cu-0.2N has been developed,and the microstructure,mechanical properties and corrosion properties have been investigated.The results show that the alloy has a balanced ferrite-austenite relation,and the ferrite content rises with the solution treatment temperature.The designed alloy is free of precipitation of sigma phase when aged at 650,750 and 850 ℃ for 3 h,respectively,whereas a few Cr23C6 precipitates are found after being aged at 750 ℃ for 8 h.Charpy impact tests indicate that the impact energy of the alloy is 68,200 and 220 J at-40,0 and 25 ℃,respectively.The designed alloy solution treated at 1050 ℃ for 30 min has a much higher yield strength and similar corrosion resistance compared with those of AISI 304 austenitic stainless steel.Moreover,the production cost of the alloy is about $ 1000 per ton which is lower than that of AISI 304.展开更多
基金Item Sponsored by National Natural Science Foundation of China(50734002)
文摘The effect of hot band annealing processes,namely simulating batch annealing and continuous annealing,on microstructure,texture,grain boundary character and r-value of ferritic stainless steel was investigated.The hot band displayed a highly elongated ribbon-like structure and a pronounced deformation texture.The fully recrystallized grains were observed after continuous annealing while the ＂typical＂ hot rolled structure was remained after batch annealing.Also,the α-fibre texture formed during hot rolling almost disappeared after continuous annealing and a weak γ-fibre texture was obtained.By contract,the α-fibre texture remained very stable after batch annealing.After cold rolling and recrystallization annealing,the favorable γ-fibre texture was achieved in the continuous annealed steel.Instead of forming the γ-fibre texture,the recrystallization texture was notably shifted toward {223}〈582〉 in the batch annealed steel.Finally,the improvement in drawability with high r-value and low Δr-value were also displayed in sheet through the initial continuous annealing process.
基金Item Sponsored by Key Project of Science and Technology Commission of Shanghai Municipality of China(065211026)Innovation Fund of Education Commission of Shanghai Municipality of China(09yz20)
文摘A new resource-saving duplex stainless steel with composition of 19Cr-6Mn-1.0Mo-0.5Ni-0.5W-0.5Cu-0.2N has been developed,and the microstructure,mechanical properties and corrosion properties have been investigated.The results show that the alloy has a balanced ferrite-austenite relation,and the ferrite content rises with the solution treatment temperature.The designed alloy is free of precipitation of sigma phase when aged at 650,750 and 850 ℃ for 3 h,respectively,whereas a few Cr23C6 precipitates are found after being aged at 750 ℃ for 8 h.Charpy impact tests indicate that the impact energy of the alloy is 68,200 and 220 J at-40,0 and 25 ℃,respectively.The designed alloy solution treated at 1050 ℃ for 30 min has a much higher yield strength and similar corrosion resistance compared with those of AISI 304 austenitic stainless steel.Moreover,the production cost of the alloy is about $ 1000 per ton which is lower than that of AISI 304.
