The effect of heat treatment on microstructure, equilibrium hydrogen sorption pressure and plateau slope of LaNi3.8Al0.75Mn0.45 alloy was investigated. X-ray diffraction (XRD) analysis indicates that annealed alloys h...The effect of heat treatment on microstructure, equilibrium hydrogen sorption pressure and plateau slope of LaNi3.8Al0.75Mn0.45 alloy was investigated. X-ray diffraction (XRD) analysis indicates that annealed alloys have single phase and the same hexagonal structure as that of LaNi5 alloy (CaCu5 type, P6/mmm). The cell parameters of alloys fluctuate with the increasing annealing temperature. The equilibrium hydrogen pressure and plateau slope are a parabola function with annealing temperature for LaNi3.8Al0.75Mn0.45 alloy. By this relationship, an appropriate heat treatment temperature for LaNi3.8Al0.75Mn0.45 alloy is determined to about 1220-1230 K by mathematic simulation process. However, the maximum hydrogen storage capacity of alloys does not affected by the annealing temperature.展开更多
The effect of Mn substitution on phase structure, hydrogen hydriding/dehydriding properties (plateau pressure and slope) and reaction heat enthalpy of LaNi4.25-xAl0.75Mnx alloys (x=0, 0.25, 0.35, 0.45, 0.55 and 0.65) ...The effect of Mn substitution on phase structure, hydrogen hydriding/dehydriding properties (plateau pressure and slope) and reaction heat enthalpy of LaNi4.25-xAl0.75Mnx alloys (x=0, 0.25, 0.35, 0.45, 0.55 and 0.65) were studied. The experimental results show that all LaNi4.25-xAl0.75Mnx alloys have single phase and have the same hexagonal structure as that of LaNi5 alloy (CaCu5 type, P6/mmm). With increasing Mn substitution content, the cell parameters of LaNi4.25-xAl0.75Mnx alloy greatly increase, but the maximum hydrogen storage capacity and the equilibrium absorption pressure of LaNi4.25-xAl0.75Mnx alloy decrease from 1.38 wt.% to 1.18 wt.% and from 1.61 to 0.0712 MPa, respectively. Moreover, the hydrogen pressure plateau slope factor σ increases from 0.014 to 0.18, but the hysteresis factor is nearly constant. The heat enthalpy absolute value |ΔHplat| increases from 46.7 kJ·mol-1 H2 to 56.1 kJ·mol-1 H2 as the Mn content x increases from 0 to 0.65.展开更多
文摘The effect of heat treatment on microstructure, equilibrium hydrogen sorption pressure and plateau slope of LaNi3.8Al0.75Mn0.45 alloy was investigated. X-ray diffraction (XRD) analysis indicates that annealed alloys have single phase and the same hexagonal structure as that of LaNi5 alloy (CaCu5 type, P6/mmm). The cell parameters of alloys fluctuate with the increasing annealing temperature. The equilibrium hydrogen pressure and plateau slope are a parabola function with annealing temperature for LaNi3.8Al0.75Mn0.45 alloy. By this relationship, an appropriate heat treatment temperature for LaNi3.8Al0.75Mn0.45 alloy is determined to about 1220-1230 K by mathematic simulation process. However, the maximum hydrogen storage capacity of alloys does not affected by the annealing temperature.
文摘The effect of Mn substitution on phase structure, hydrogen hydriding/dehydriding properties (plateau pressure and slope) and reaction heat enthalpy of LaNi4.25-xAl0.75Mnx alloys (x=0, 0.25, 0.35, 0.45, 0.55 and 0.65) were studied. The experimental results show that all LaNi4.25-xAl0.75Mnx alloys have single phase and have the same hexagonal structure as that of LaNi5 alloy (CaCu5 type, P6/mmm). With increasing Mn substitution content, the cell parameters of LaNi4.25-xAl0.75Mnx alloy greatly increase, but the maximum hydrogen storage capacity and the equilibrium absorption pressure of LaNi4.25-xAl0.75Mnx alloy decrease from 1.38 wt.% to 1.18 wt.% and from 1.61 to 0.0712 MPa, respectively. Moreover, the hydrogen pressure plateau slope factor σ increases from 0.014 to 0.18, but the hysteresis factor is nearly constant. The heat enthalpy absolute value |ΔHplat| increases from 46.7 kJ·mol-1 H2 to 56.1 kJ·mol-1 H2 as the Mn content x increases from 0 to 0.65.