Geotechnical,Mineralogical and Chemical Characterization of the Missole II Clayey Materials of Douala Sub-Basin(Cameroon)for Construction Materials

Geotechnical tests conducted on clayey materials of Missole II, Douala sub-basin of Cameroon showed that these materials present: fines particles (55 to 78 wt.%), sand (22 to 44 wt.%), and plasticity index of 13.8 to 21.6%. The X-ray diffraction (XRD) and the chemical analysis revealed a kaolinite amount of 46 to 56 wt.%, 19 to 27 wt.% of illite, 12 to 19 wt.% of quartz, 3 to 5 wt.% of goethite, 2 to 5 wt.% of hematite, 1.5 to 5 wt.% of anatase, 2 to 3 wt.% of feldspar-K with 52.87 to 63.11 wt.% of SiO2, 18.08 to 24.31 wt.% of Al2O3, 3.28 to 11.45 wt.% of Fe2O3 and a small content of bases (<2 wt.%). The results of geotechnical tests combined to those of the XRD and the chemical analysis showed that the Missole II clayey materials are suitable for the manufacture of bricks, tiles and sandstones.

Hydrothermal Alteration of Basaltic Rocks at Eruptive Vents on Mount Cameroon Volcano, West Africa

The study of changes in rocks due to interaction with hydrothermal fluids at active volcanoes provides insights into wall rock alteration associated with ore deposits formed in the geological past. Therefore, the nature of mineral alteration and chemical changes experienced by wall rocks can be investigated at eruptive sites on active volcanoes and the results used to better constrain ore-forming processes. In this study, we investigated the alteration at eruptive sites at Mount Cameroon volcano. These eruptive vents lie along NE-SW-trending fissures that define the Mount Cameroon rift. The vents are surrounded by cones composed largely of pyroclastic materials and to a lesser extent lava. Fumaroles (volcanic gases) rising through the vents during and after the 1999 eruption have resulted in the alteration of the pyroclastic robble along the fissures and the inner walls of the cones. Consequently, altered basaltic materials are covered with thin films of reddish, yellowish to whitish secondary minerals. These coatings result from an interaction between the surfaces of the basaltic glass with volcanically-derived acidic fluids. Petrographic investigations and XRD analysis of the basalts have identified primary mineral phases, such as olivine, pyroxene (mainly augite) and feldspars. Alteration products revealed include ubiquitous silica as well as gypsum, magnetite, feldspar, alunite and jarosite. Jarosite occurrence indicates that SO2 is the primary volcanically-derived acid source involved in coating formation. High contents of sulfur identified in the basalts indicate that melts at Mount Cameroon can be sulfur saturated as backed by previous melt inclusion data. Whole rock geochemical analysis shows a gain in silica in the altered samples and this ties with the mass balance calculations although minor gains of Al2O3, , MgO, MnO, CaO and K2O are shown by some samples.

Hydrogeochemical Characteristics and Quality Assessment of Surface Water in an Agricultural Area in Equatorial Africa: The Mungo River Basin, South West Cameroon, Central Africa

The Mungo River and its tributaries represent the major sources of water supply for agriculture and drinking purposes for the Douala city and the south western agricultural region of Cameroon. In this study, the surface water hydrochemistry was investigated at 12 locations to determine the hydrochemical and heavy metals characteristics and to assess the suitability for drinking and irrigational purposes. Results of water samples collected along the main channel and tributaries showed that the major ions were dominated by Ca2+ > Na+ > Mg2+ > K+ > NH4+ and > HCO3- > SO42- > Cl- > F- > PO43- , with concentrations varying between 0 to 60 mg/l. Heavy metal concentrations were relatively weak, dominated by Fe > Mn > As > Cd > Zn > Se. The main hydrochemical facies types revealed primarily 52% Ca-Na-HCO3 and 48% Ca-Mg-HCO3. Base on Gibbs diagram and relative ion ratios, the hydrochemical characteristics are derived from weathering of silicate rocks and atmospheric source. The influence of anthropogenic factors including agro-industrial activities on the hydrochemical characteristics was less marked. The chemical composition of the water samples was compared with the drinking water standards and only the concentration of Fe was above the WHO guide limits in a single sample at Passi. The evaluation of the water quality for irrigation showed that 95% of water samples are suitable for irrigation in almost all soil types. According to the water quality index (HPI, HEI and Cd), this water is considered of excellent quality for consumption. The results provide a preliminary database for sustainable management of water resource in the Mungo River basin.

Ore Texture,Mineralogy and Whole Rock Geochemistry of the Iron Mineralization from Edea North Area,Nyong Complex,Southern Cameroon:Implication for Origin and Enrichment Process

This study presents the ore texture, mineralogy and whole rock geochemistry of iron occurrence from the Edea North area located at the upper limit of the Nyong Unit, part of the Congo craton. This iron mineralization is of magnetite quartzite type enclosed by metamorphic rocks of the granulite facies. Two main facies have been identified over the study area including the banded and the massive facies. The mineralogical set of these facies is in majority represented by magnetite, quartz and pyroxene martite in addition to minor biotite, apatite, and amphibole. Magnetite presents as irregular and elongated minerals which can contain quartz inclusions of various shapes and sizes, as blasts clustering, around pyroxenes and isolated xenomorphic magnetite minerals in the silicate phases. Quartz varies from fine to coarse-grained and ribbon quartz. This indicates re-crystallization and deformation during metamorphism. Electron microprobe analysis on magnetite and martite show Fe2O3 contents that vary between 96.11 and 99.76. Whole rock chemical data showed that Fe-contents are as high as 62.9 wt%. The SiO2 content varies between 33.8 wt% and 51.2 wt%. Iron oxides and SiO2 are negatively correlated. Moreover, the low positive correlations between Al2O3 and HFSE, and LILE suggest a contribution of clastic materials in the protolith of studied materials. The samples show low contents of V, Cr, Ba, Zr with respect to igneous rocks. This may infer a sedimentary origin for the studied rocks;furthermore, these materials may have undergone hydrothermal alteration. The REE patterns reveal enrichment in LREE compared to HREE. Some samples show positive Eu (1.82) and other negative anomalies Eu (0.54 to 0.97). The lack of Ce anomalies suggests that the depositional environment of the Edea North iron occurrence was anoxic or suboxic. Overall, the Edea North iron occurrence may have undergone significant input from hydrothermal sources with imprints of the clastic during its deposition.

Morpho-Structural Mapping Constraints from Geophysical and Test Pit Investigations: Case Study of the Bomkoul Locality in Douala Sedimentary Basin, Cameroon, Central Africa

A survey using the electrical resistivity and test pit methods is carried out in the Douala subbasin in order to investigate the sub-surface layering and evaluate the thickness of each layer through the variation of the resistivity with the depth. Applying the Schumberger array, a total of 48 vertical electrical sounding is conducted along 8 profiles directed W-E and using traditional method, 25 test pits with depth between 15 and 19 meters are done. Qualitative interpretation is carried out through the resistivity and test pit maps. The test pit maps reveal the presence of the following layers: The first layer of thickness varies from 0.2 to 2.0 m (average of 1.9 m). The thickness of the second layer varies between 0.2 and 4.0 m with an average of 2.8 m. The thickness of the third layer is between 2.0 and 4.0 m with an average of 3.8 m. That of the fourth and fifth layers ranges respectively between 4.0 and 6.0 m (average of 5.4 m) and between 2.0 and 6.0 m with an average of 4.4 m. Isoresistivities maps from resistivities computed for different AB/2 values (1.5;4.4;13.5;19;27.5;58 m) are generally characterized by the apparent resistivities which define many domains in function of the AB/2 values. The superficial layer is characterized by electric resistivity values ranging from 720 to 2073 Ωm for AB/2 = 1.5 m and probably represents pedologic materials. For other values of AB/2, resistivity varies from 253 to 32,381 Ωm (AB/2 = 4.4 m), 0.1 to 1838 (AB/2 = 13.2 m) with an average of 341 Ωm, 0.3 to 1608 Ωm (AB/2 = 19 m) with an average of 279 Ωm, 6.4 to 1427 Ωm (AB/2 = 27.5 m) with an average 291 Ωm, and 19.7 to 3555 Ωm (AB/2 = 58 m) with an average of 850 Ωm. These different values of resistivity represent the sedimentary materials.