In the procedure of the steady-state hierarchical optimization with feedback for large-scale industrial processes, a sequence of set-point changes with different magnitudes is carried out on the optimization layer. To...In the procedure of the steady-state hierarchical optimization with feedback for large-scale industrial processes, a sequence of set-point changes with different magnitudes is carried out on the optimization layer. To improve the dynamic performance of transient response driven by the set-point changes, a filter-based iterative learning control strategy is proposed. In the proposed updating law, a local-symmetric-integral operator is adopted for eliminating the measurement noise of output information,a set of desired trajectories are specified according to the set-point changes sequence, the current control input is iteratively achieved by utilizing smoothed output error to modify its control input at previous iteration, to which the amplified coefficients related to the different magnitudes of set-point changes are introduced. The convergence of the algorithm is conducted by incorporating frequency-domain technique into time-domain analysis. Numerical simulation demonstrates the effectiveness of the proposed strategy,展开更多
Thermal mechanical cyclic strain tests were carried out under in-phase andout-of-phase conditions on a Nickel-base Superalloy GH4133 in the temperature range of 571-823 degC. Based on analyzing the present models of T...Thermal mechanical cyclic strain tests were carried out under in-phase andout-of-phase conditions on a Nickel-base Superalloy GH4133 in the temperature range of 571-823 degC. Based on analyzing the present models of TMF (thermal mechanical fatigue) life prediction, a newmodel for predicting nickel-base superalloy TMF lifetime was proposed. TMF life of superalloy GH4133was calculated accurately based on the new model. Experimental TMF life has been compared with thecalculated results and all results fall in the scatter band of 1.5. The calculating results showthat the new model is not only simple, but also precise. This model will play great roles as lifeprediction of the metal materials and the engineering components subjected to non-isothermal serviceconditions.展开更多
Low-cycle fatigue experiments of tension-compression, torsion andtension-torsion with holding time were performed. The interaction law of creep and fatigue undermultiaxial stress at high temperature was investigated, ...Low-cycle fatigue experiments of tension-compression, torsion andtension-torsion with holding time were performed. The interaction law of creep and fatigue undermultiaxial stress at high temperature was investigated, and the micro-mechanism of equilibriumdiagrams was analyzed. A united equation of fatigue life under multiaxial stress was proposed.展开更多
The adsorption of methanol in the acid sites of zeolites has attracted a great deal of attention because of its relevance to the industrial methanol to gasoline conversion process. In this work, the B3LYP hybrid densi...The adsorption of methanol in the acid sites of zeolites has attracted a great deal of attention because of its relevance to the industrial methanol to gasoline conversion process. In this work, the B3LYP hybrid density functional method was used to investigate the adsorption behavior of methanol on Bronsted acid sites in B, Al, Ga and Fe isomorphously substituted ZSM-5 zeolites. The optimized structures reveal a physisorbed methanol interacting with the zeolite framework through two hydrogen bonds. The order of the computed adsorption energy correlates with the acid strength of the isomorphously substituted ZSM-5: B-ZSM-5《Fe-ZSM-5<Ga-ZSM-5<Al-ZSM-5. The adsorption difference between methanol and ammonia is compared.展开更多
基金This work was supported by the National Natural Science Foundation of China (No. 60274055)
文摘In the procedure of the steady-state hierarchical optimization with feedback for large-scale industrial processes, a sequence of set-point changes with different magnitudes is carried out on the optimization layer. To improve the dynamic performance of transient response driven by the set-point changes, a filter-based iterative learning control strategy is proposed. In the proposed updating law, a local-symmetric-integral operator is adopted for eliminating the measurement noise of output information,a set of desired trajectories are specified according to the set-point changes sequence, the current control input is iteratively achieved by utilizing smoothed output error to modify its control input at previous iteration, to which the amplified coefficients related to the different magnitudes of set-point changes are introduced. The convergence of the algorithm is conducted by incorporating frequency-domain technique into time-domain analysis. Numerical simulation demonstrates the effectiveness of the proposed strategy,
文摘Thermal mechanical cyclic strain tests were carried out under in-phase andout-of-phase conditions on a Nickel-base Superalloy GH4133 in the temperature range of 571-823 degC. Based on analyzing the present models of TMF (thermal mechanical fatigue) life prediction, a newmodel for predicting nickel-base superalloy TMF lifetime was proposed. TMF life of superalloy GH4133was calculated accurately based on the new model. Experimental TMF life has been compared with thecalculated results and all results fall in the scatter band of 1.5. The calculating results showthat the new model is not only simple, but also precise. This model will play great roles as lifeprediction of the metal materials and the engineering components subjected to non-isothermal serviceconditions.
基金This work is supported by National Natural Science Foundation of China (No. 10172010)
文摘Low-cycle fatigue experiments of tension-compression, torsion andtension-torsion with holding time were performed. The interaction law of creep and fatigue undermultiaxial stress at high temperature was investigated, and the micro-mechanism of equilibriumdiagrams was analyzed. A united equation of fatigue life under multiaxial stress was proposed.
基金This work is supported by the National Natural Science Foundation of China(No.20073057)
文摘The adsorption of methanol in the acid sites of zeolites has attracted a great deal of attention because of its relevance to the industrial methanol to gasoline conversion process. In this work, the B3LYP hybrid density functional method was used to investigate the adsorption behavior of methanol on Bronsted acid sites in B, Al, Ga and Fe isomorphously substituted ZSM-5 zeolites. The optimized structures reveal a physisorbed methanol interacting with the zeolite framework through two hydrogen bonds. The order of the computed adsorption energy correlates with the acid strength of the isomorphously substituted ZSM-5: B-ZSM-5《Fe-ZSM-5<Ga-ZSM-5<Al-ZSM-5. The adsorption difference between methanol and ammonia is compared.
