Modeling of multiphase flow in low permeability porous media:Effect of wettability and pore structure properties

Multiphase flow in low permeability porous media is involved in numerous energy and environmental applications.However,a complete description of this process is challenging due to the limited modeling scale and the effects of complex pore structures and wettability.To address this issue,based on the digital rock of low permeability sandstone,a direct numerical simulation is performed considering the interphase drag and boundary slip to clarify the microscopic water-oil displacement process.In addition,a dual-porosity pore network model(PNM)is constructed to obtain the water-oil relative permeability of the sample.The displacement efficiency as a recovery process is assessed under different wetting and pore structure properties.Results show that microscopic displacement mechanisms explain the corresponding macroscopic relative permeability.The injected water breaks through the outlet earlier with a large mass flow,while thick oil films exist in rough hydrophobic surfaces and poorly connected pores.The variation of water-oil relative permeability is significant,and residual oil saturation is high in the oil-wet system.The flooding is extensive,and the residual oil is trapped in complex pore networks for hydrophilic pore surfaces;thus,water relative permeability is lower in the water-wet system.While the displacement efficiency is the worst in mixed-wetting systems for poor water connectivity.Microporosity negatively correlates with invading oil volume fraction due to strong capillary resistance,and a large microporosity corresponds to low residual oil saturation.This work provides insights into the water-oil flow from different modeling perspectives and helps to optimize the development plan for enhanced recovery.

Effects of sediment characteristics on the sediment transport capacity of overland flow

The transport of sediments is a crucial part of soil erosion.Accurately calculating the sediment transport capacity is key to the construction of soil erosion process models.Research on Tc has focused mainly on the dynamics of a single particle of sediment and hydraulic variables.There have been few studies of the impact of soil aggregates on the Tc.To clarify how sediment characteristics,including those for single particles and aggregates,affect the Tc of overland flow with no raindrop import,flume experiments were implemented at slope gradients varying from 5.24%to 26.80%and flow discharges ranging from 0.68 to 5.41×10^(-3)m^(2)s^(-1).The experimental materials were five typical soils in China.The results indicated that the correlation between the measured Tc and sediment mechanical composition indexes of the five soils was indistinctive in this study.The sediment settling velocity with aggregates has a significant corre-lation with the measured Tc.New equations,including for the sediment settling velocity with aggregatesωud75,were established to calculate the Tc.The empirical equation that includedωud75,slope gradient and unit discharge performed greatly in predicting Tc(R^(2)=0.93,NSE=0.90).ωud75 can effectively improve the calculation accuracy of Tc.The new equation including flow and sediment properties obtained through dimensional analysis performed well in predicting Tc(R^(2)=0.99,NSE=0.91),and the calculation accuracy was better than that of the empirical model derived in this study.These findings indicate that the sediment settling velocity is an important variable in the equation for predicting sediment transport capacity of overland flow.