期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
Incidence, risk factors, and cumulative risk of delirium among ICU patients: A case-control study 被引量:2
1
作者 yanbin Pan jianlong yan +3 位作者 Zhixia Jiang Jianying Luo Jingjing Zhang Kaihan yang 《International Journal of Nursing Sciences》 CSCD 2019年第3期247-251,共5页
Objectives: Delirium is a common acute cognitive impairment syndrome among intensive care unit (ICU) patients.This study was aimed to investigate the incidence,risk factors,and cumulative risk of delirium among ICU pa... Objectives: Delirium is a common acute cognitive impairment syndrome among intensive care unit (ICU) patients.This study was aimed to investigate the incidence,risk factors,and cumulative risk of delirium among ICU patients.Methods: A case-control study including clinical records of 452 patients were retrospectively analyzed.Delirium was assessed using the Confusion Assessment Method for the ICU and Richmond Agitation -Sedation Scale.Results: We found that 163 out of the 452 patients (36.1%) had delirium.Multivariate analysis showed that use of sedatives,length of ICU hospitalization,and physical restraint were independent risk factors for delirium.The additive effect of all three factors resulted to an odds ratio of 30.950.Conclusion: The incidence of delirium remained high.Thus,nurses shall strengthen the monitoring of delirium,regularly access the patient's level of calmness,and limit the use of physical restraint. 展开更多
关键词 DELIRIUM Intensive care units Risk factors Cumulative risk Case-control studies
下载PDF
氧化石墨烯改性碳纤维/环氧树脂复合材料的湿热性能及微观形貌 被引量:10
2
作者 刘文军 严建龙 +5 位作者 周川 李伟东 周玉敬 邱虹 白华 胡晓兰 《复合材料学报》 EI CAS CSCD 北大核心 2021年第5期1416-1425,共10页
采用湿法预浸技术和模压工艺制备了氧化石墨烯(GO)改性碳纤维/环氧树脂(CF/EP)复合材料,研究了GO在室温干态及湿热处理后对CF/EP复合材料动态热力学性能和层间剪切性能的影响,并通过微观形貌分析了复合材料的改性机制。结果表明,当GO添... 采用湿法预浸技术和模压工艺制备了氧化石墨烯(GO)改性碳纤维/环氧树脂(CF/EP)复合材料,研究了GO在室温干态及湿热处理后对CF/EP复合材料动态热力学性能和层间剪切性能的影响,并通过微观形貌分析了复合材料的改性机制。结果表明,当GO添加量分别为0.5%和0.8%时,GO-CF/EP复合材料的玻璃化转变温度(Tg)得到明显提高,由CF/EP复合材料的184.4℃分别提高到197.7℃和199.5℃;GO-CF/EP复合材料经湿热处理后,GO-CF/EP复合材料的Tg的保持率比CF/EP略低。GO添加量分别为0.05%和0.1%时,GO-CF/EP复合材料的层间剪切强度由CF/EP复合材料的59.7 MPa分别提高到70.2 MPa和72.2 MPa;GO-CF/EP复合材料进行湿热处理后,GO添加量为0.05%的GO-CF/EP复合材料和GO添加量为0.1%的GOCF/EP复合材料层间剪切强度较CF/EP复合材料高,但GO-CF/EP复合材料的湿热后层间剪切强度保持率均低于CF/EP复合材料。力学损耗分析表明,GO有效提高了CF与EP基体间的界面黏结作用。微观形貌分析表明,GO的存在可有效分散裂纹能量并使裂纹发生偏转,使GO-CF/EP复合材料抵抗裂纹扩展的能力提高。 展开更多
关键词 氧化石墨烯 碳纤维 树脂基复合材料 湿热性能 微观形貌
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部