Magneto-hydrodynamic simulation study of direct current multi-contact circuit breaker for equalizing breaking arc

This work is based on a direct current(DC)natural current commutation topology,which uses load-carrying branch contacts carrying rated current and multiple sets of series arcing branch contacts in parallel to achieve circuit breaking.The proposed topology can meet the new requirements of higher voltage DC switches in aviation,aerospace,energy and other fields.First,a magneto-hydrodynamic arc model is built using COMSOL Multiphysics,and the different arc breaking characteristics of the arcing branch contacts in different gas environments are simulated.Then,a voltage uniformity coefficient is used to measure the voltage sharing effect in the process of dynamic interruption.In order to solve the dispersion of arcing contact action,a structural control method is adopted to improve the voltage uniformity coefficient.The uniform voltage distribution can improve the breaking capacity and electrical life of the series connection structure.

The slope creep law for a soft rock in an open-pit mine in the Gobi region of Xinjiang, China

The lithology of the strata in the Gobi region of the Xinjiang autonomous region of China is mainly composed of mudstone,silty mudstone,and other soft rocks.Because of the low strength of the rock mass and the serious effects of physical weathering in this area,the slope stability in open-pit mines is poor,and creep deformation and instability can readily occur.Taking the Dananhu No.2 open-pit mine as a typical example,the creep test of a mudstone sample under different stress levels was studied.Then,based on a bottom friction experiment and a FLAC3D numerical simulation,the deformation and failure processes of the slope were analyzed.The stress–displacement curve and the displacement–time curve for the monitoring points were plotted to obtain the relationship between the stress and displacement for the slope of the soft rock.The results showed that the long-term strength of the mudstone was between 8.0 and 8.8 MPa,and that stable creep occurred when the slope was under low stress.The potential failure mode for this type of slope is that the front edge creeps along the weak layer and then a crack is formed at the trailing edge of the slope.When the crack penetrates the weak layer,cutting bedding and bedding sliding occur.The deformation process of the stable creep slope includes an initial deformation stage,an initial creep stage,a constant velocity creep stage and a deceleration creep stage.

Properties of intermediate-frequency vacuum arc in sinusoidal curved contact and butt contact

In this report,two new contact structures of a vacuum interrupter with a sinusoidal curved surface are proposed to improve the capability by increasing the surface area.The experimental investigation of vacuum arc at intermediate frequency(360-800 Hz)was conducted and the results were compared with a butt contact with the same contact diameter(41 mm)and the same material.By analyzing the arc behavior,arc voltage characteristics,arc energy,current interrupting capacity,ablation of the anode contact and condensation of the arc products at a 3 mm gap,the differences in their vacuum arc characteristics were determined.The correlations of their arc energy with the amplitude and the frequency of the current were also achieved.Analysis suggests that the ruled curved contact has strong application potentiality because of its low arc energy,low arc voltage noise and arc voltage peak,light ablation on the surface of the anode contact and high interrupting capacity.