Repairing of exit-hole in friction-stir-spot welded joints for 2024-T4 aluminum alloy by resistance welding

The exit-hole in friction stir spot welded(FSSWed) 2024-T4 aluminum alloy joints was successfully repaired by using a three-phase secondary rectification resistance spot welding machine, which is termed as filling exit-hole based on resistance welding(FEBRW). The filling dynamic behavior of force was recorded by a device monitoring. Optical microscope(OM), electron backscatter diffraction(EBSD), and tensile shear tests and finite element modelling were conducted to investigate the repairing stages and bonding mechanisms of the repaired joints in detail. Results showed that exit-hole was completely filled and repaired experiencing three stages. Metallurgical bonding was achieved between plug and exit-hole wall in two forms, including melting bonding in the middle of the joints and partial diffusion bonding on both the upper and bottom of the joints. The highest tensile shear strength of the repaired joints was 7.43 kN, which was 36.3% higher than that of the as welded joints. Resistance welding paves an efficient way to repair the exit-hole in FSSWed joints.

Analysis of interprovincial trade embodied carbon emissions in Beijing-Tianjin-Hebei and surrounding provinces: based on constructed MRIO Model

The interprovincial trade embodied carbon emissions plays an important role in the national emission reduction target among China's provinces. Furthermore, it will affect the smooth start-up of the national carbon trade market as well as the implementation of targets in 2030 for dealing with the climate change. Based on constructed MRIO model, this paper analyzes the embodied carbon emission trade flows among Beijing, Tianjin, Hebei and surrounding regions such as Shanxi, Shaanxi, and Inner Mongolia. The results indicate that six provinces have formed different patterns of carbon trade balance, where Beijing, Tianjin, and Hebei provinces are in a deficit position, while the other three provinces are in a surplus position.Beijing, Tianjin, and Hebei have transferred part of the carbon emissions to the other three provinces, which shows greater heterogeneity among various provinces and provincial different sectors. On basis of the conclusions, this paper puts forward some suggestions on provincial decomposition, responsibility distribution, and provincial collaborative reduction for national emission reduction targets.

Recent, development in low-constraint fracture toughness testing for structural integrity assessment of pipelines

Fracture toughness measurement is an integral part of structural integrity assessment of pipelines. Traditionally, a single-edge-notched bend （SE（B）） specimen with a deep crack is recommended in many existing pipeline structural integrity assessment procedures. Such a test provides high constraint and therefore conservative fracture toughness results. However, for girth welds in service, defects are usually subjected to primarily tensile loading where the constraint is usually much lower than in the three-point bend case. Moreover, there is increasing use of strain-based design of pipelines that allows applied strains above yield. Low-constraint toughness tests represent more realistic loading conditions for girth weld defects, and the corresponding increased toughness can minimize unnecessary conservatism in assessments. In this review, we present recent developments in low-constraint fracture toughness testing, specifically using single-edge- notched tension specimens, SENT or SE（T）. We focus our review on the test procedure development and automation, round-robin test results and some common concerns such as the effect of crack tip, crack size monitoring techniques, and testing at low temperatures. Examples are also given of the integration of fracture toughness data from SE（T） tests into structural integrity assessment.

Cutting CO_(2)emissions through demand side regulation:Implications from multi-regional input-output linear programming model

This study combines multi-regional inputoutput(MRIO)model with linear programming(LP)model to explore economic structure adjustment strategies for the reduction of carbon dioxide(CO_(2))emissions.A particular feature of this study is the identification of the optimal regulation sequence of final products in various regions to reduce CO_(2)emissions with the minimum loss in gross domestic product(GDP).By using China's MRIO tables 2017 with 28 regions and 42 economic sectors,results show that reduction in final demand leads to simultaneous reductions in GDP and CO_(2)emissions.Nevertheless,certain demand side regulation strategy can be adopted to lower CO_(2)emissions at the smallest loss of economic growth.Several key final products,such as metallurgy,nonmetal,metal,and chemical products,should first be regulated to reduce CO_(2)emissions at the minimum loss in GDP.Most of these key products concentrate in the coastal developed regions in China.The proposed MRIO-LP model considers the inter-relationship among various sectors and regions,and can aid policy makers in designing effective policy for industrial structure adjustment at the regional level to achieve the national environmental and economic targets.