Harmonic nonlinear ultrasound can offer high sensitivity for residual stress measurements;however,it cannot be used for local stress measurements at a point in space and exhibits nonlinear distortions in the experimen...Harmonic nonlinear ultrasound can offer high sensitivity for residual stress measurements;however,it cannot be used for local stress measurements at a point in space and exhibits nonlinear distortions in the experimental system.This paper presents a feasibility study on the measurement of residual stress in a metal plate using a nonlinear Lamb wave-mixing technique.The resonant conditions for two Lamb waves to generate a mixing frequency wave are obtained via theoretical analysis.Finite element simulations are performed to investigate the nonlinear interactions between the two Lamb waves.Results show that two incident A0 waves interact in regions of material nonlinearity and generate a rightward S0 wave at the sum frequency.Residual stress measurement experiments are conducted on steel plate specimens using the collinear Lamb wave-mixing technique.By setting different delays for two transmitters,the generated sum-frequency component at different spatial locations is measured.Experimental results show that the spatial distribution of the amplitude of the sum-frequency component agrees well with the spatial distribution of the residual stress measured using X-rays.The proposed collinear Lamb wave-mixing method is effective for measuring the distribution of residual stress in metal plates.展开更多
Excitation parameter preferences are key factors a ecting the performance of magnetic frequency mixing detection.A uniform experimental design method was used to analyze this influence.Using fuzzy theory,a comprehensi...Excitation parameter preferences are key factors a ecting the performance of magnetic frequency mixing detection.A uniform experimental design method was used to analyze this influence.Using fuzzy theory,a comprehensive model is established for evaluating the e ect of magnetic frequency mixing.A polynomial is selected as the regression function to express explicitly the correlation between the excitation parameters and the frequency-mixing e ect.The excitation parameters were then optimized using genetic algorithm.Magnetic frequency mixing experiments were conducted to measure the surface hardness of some ferromagnetic materials.Frequency mixing is further enhanced under the optimal settings,resulting in an improvement in the measurement sensitivity.The results of this study support the application of the magnetic frequency mixing technique in non-destructive testing.展开更多
In this paper,three-dimensional finite-element modeling is conducted to investigate the nonlinear interactions between Lamb waves and microcracks.The simulation research focuses on the influence of microcrack orientat...In this paper,three-dimensional finite-element modeling is conducted to investigate the nonlinear interactions between Lamb waves and microcracks.The simulation research focuses on the influence of microcrack orientation on the propagation direction of generated sum-frequency Lamb waves.The simulation results show that the resonant conditions based on classical nonlinear theory are valid for such interactions,leading to the generation of transmitted and reflected sum-frequency SO waves(SFSWs).Moreover,the propagation directions of these two SFSWs exhibit different trends with respect to the orientations of microcracks.The transmitted SFSW can be used to detect microcracks,whereas the reflected one can be used to measure their orientations.展开更多
基金National Natural Science Foundation of China(Grant Nos.11972053,12274012)。
文摘Harmonic nonlinear ultrasound can offer high sensitivity for residual stress measurements;however,it cannot be used for local stress measurements at a point in space and exhibits nonlinear distortions in the experimental system.This paper presents a feasibility study on the measurement of residual stress in a metal plate using a nonlinear Lamb wave-mixing technique.The resonant conditions for two Lamb waves to generate a mixing frequency wave are obtained via theoretical analysis.Finite element simulations are performed to investigate the nonlinear interactions between the two Lamb waves.Results show that two incident A0 waves interact in regions of material nonlinearity and generate a rightward S0 wave at the sum frequency.Residual stress measurement experiments are conducted on steel plate specimens using the collinear Lamb wave-mixing technique.By setting different delays for two transmitters,the generated sum-frequency component at different spatial locations is measured.Experimental results show that the spatial distribution of the amplitude of the sum-frequency component agrees well with the spatial distribution of the residual stress measured using X-rays.The proposed collinear Lamb wave-mixing method is effective for measuring the distribution of residual stress in metal plates.
基金Supported by National Key Research and Development Program of China(Grant No.2017YFF0209703)National Natural Science Foundation of China(Grant Nos.11972053,11527801).
文摘Excitation parameter preferences are key factors a ecting the performance of magnetic frequency mixing detection.A uniform experimental design method was used to analyze this influence.Using fuzzy theory,a comprehensive model is established for evaluating the e ect of magnetic frequency mixing.A polynomial is selected as the regression function to express explicitly the correlation between the excitation parameters and the frequency-mixing e ect.The excitation parameters were then optimized using genetic algorithm.Magnetic frequency mixing experiments were conducted to measure the surface hardness of some ferromagnetic materials.Frequency mixing is further enhanced under the optimal settings,resulting in an improvement in the measurement sensitivity.The results of this study support the application of the magnetic frequency mixing technique in non-destructive testing.
基金supported by the National Key Research and Development Program of China(Grant No.2016YFF0203002)National Natural Science Foundation of China(Grant Nos.11572010,11572011).
文摘In this paper,three-dimensional finite-element modeling is conducted to investigate the nonlinear interactions between Lamb waves and microcracks.The simulation research focuses on the influence of microcrack orientation on the propagation direction of generated sum-frequency Lamb waves.The simulation results show that the resonant conditions based on classical nonlinear theory are valid for such interactions,leading to the generation of transmitted and reflected sum-frequency SO waves(SFSWs).Moreover,the propagation directions of these two SFSWs exhibit different trends with respect to the orientations of microcracks.The transmitted SFSW can be used to detect microcracks,whereas the reflected one can be used to measure their orientations.