Fiber optic sensing and performance evaluation of a water conveyance tunnel with composite linings under super-high internal pressures

For long-distance water conveyance shield tunnels in operation,the high internal water pressure may cause excessive deformation of composite linings,affecting their structural integrity and serviceability.However,the deformation and failure characteristics of lining structures under internal water pressure are not well investigated in the literature,particularly for three-layer composite linings.This study presents an in situ experimental investigation on the response of two types of composite linings(i.e.separated and combined lining structures)subjected to internal pressures,in which a fiber optic nerve system(FONS)equipped with distributed strain and displacement sensing nerves was employed to monitor the performance of the two composite linings during testing.The experimental results clearly show that the damage of the tunnel lining under different internal pressures was mainly located in the self-compaction concrete layer.The separated lining structure responded more aggressively to the variations in internal pressures than the combined one.Moreover,two evaluation indices,i.e.radial displacement and effective stiffness coefficient,are proposed for describing the changes in the structural bearing performance.The effective stiffness coefficients of the two types of lining structures were reduced by 39.4%and 29.5%,respectively.Considering the convenience of field monitoring,it is suggested that the average strains at different layers can be used as characteristic parameters for estimating the health conditions of lining structures in service.The analysis results provide a practical reference for the design and health evaluation of water conveyance shield tunnels with composite linings.

Stability analysis of bank slope under conditions of reservoir impounding and rapid drawdown

Stability of an ancient landslide in a reservoir area is analyzed by using centrifugal model tests, soil laboratory tests and numerical analysis. Special attention is paid to variation in water level, simulation of large-scale heterogeneous prototype slope, and strength reduction of sliding zone soils after slope sliding. The results of centrifugal model test show that reservoir impounding can reduce sliding resistance at the slope toe, followed by toe collapsing and front cracking of slope. Rapid drawdown can produce hydrodynamic pressure towards reservoir at the front of slope. Deformation is observed in the middle and upper slope, which reduces the slope stability further and forms the pull-typed landslide trend. Reinforcement of slope toe is effective for preventing the progressive failure. The results of laboratory test show that slope toe sliding will lead to the redistribution of soil density and moisture content, which will reduce the shear strength of soil in sliding zone, and the cohesion of immersed soil is reduced gradually and finally vanishes with time. The numerical results show that the strength reduction method used in finite element method (FEM) is very effective in capturing the progressive failure induced by reservoir water level fluctuations, and the evolution of failure surface derived from numerical simulation is very similar to that observed in centrifugal model test.

Study of the insulation effect of freezing apparatuses

In-situ tests and numerical manipulations were conducted for comparison of superior/inferior quality of casing-tube-vacuumized insulation and polyurethane insulation of fi＇eezing apparatuses in relation to non-uniform cold distribution in the multi-coil fi＇eez- ing layout and the contradiction between large-coil diameter layout of the freezing holes and stability of the headfi＇ame base. Tests show that： （1） under current technology, vacuumized insulation is of short duration due to lack of appropriate applied vacuum; （2） after the freezing pipe is insulated with polyurethane, the temperature gradient is less than no insulation, and the temperature dif- ference between insulated and non-insulated apparatuses is stable as the freezing period increases. Finally, it is pointed out that polyurethane insulation is quite efficient in present technical freezing construction. Keywords： freezing pipe; insulation effect; polyurethane; energy conservation