The magnetic hysteresis loop was measured to know the magnetic property of molybdenite concentrate.In order to evaluate its microwave absorption capacity, the dielectric properties of molybdenite concentrate was inves...The magnetic hysteresis loop was measured to know the magnetic property of molybdenite concentrate.In order to evaluate its microwave absorption capacity, the dielectric properties of molybdenite concentrate was investigated using cavity perturbation method at 915 MHz dependent on densities and temperatures.The parameter data were fitted using regression fit and a model related to the same density and temperature ranges was developed.A nonlinear surface fitting was used to present visually the effect of dielectric parameters on the microwave penetrate depth of molybdnite concentrate.The crystal products of MoO 3 obtained from microwave roasting at different temperatures were examined by scanning electron microscopy (SEM) and X-ray diffraction (XRD).The results show both the dielectric constants and loss factors increase in the increase of apparent densities and temperatures with different growth rates in the experimental range.Due to the distinguished trend of dielectric performance dependent on temperatures, two parts in the heating scenario for the molybdenite concentrate samples were divided.The microwave penetration depth is inversely proportional to both apparent densities and temperatures.The nonlinear fitting surfaces indicate the increase of dielectric loss provides an enough decrease in microwave penetration depth.In contrast, the dielectric constant has a positive effect for it.Pure MoO 3 was produced at 800 ℃ by using microwave energy.This work can be helpful to design and simulate microwave system for efficient beneficiation of molybdenite concentrate and to prepare molybdenum products from this concentrate.展开更多
Mercury-containing catalysts are widely used for acetylene hydrochlorination in China. Surface chemical characteristics of the fresh low-level mercury catalysts and spent low-level mercury catalysts were compared usin...Mercury-containing catalysts are widely used for acetylene hydrochlorination in China. Surface chemical characteristics of the fresh low-level mercury catalysts and spent low-level mercury catalysts were compared using multiple characterization methods. Pore blockage and active site coverage caused by chlorine-containing organics are responsible for catalyst deactivation. The reactions of chloroethylene and acetylene with chlorine free radical can generate chlorine-containing organic species. SiO_2 and functional groups on activated carbon contribute to the generation of carbon deposition. No significant reduction in the total content of mercury was observed after catalyst deactivation, while there was mercury loss locally. The irreversible loss of HgCl_2 caused by volatilization, reduction and poisoning of elements S and P also can lead to catalyst deactivation. Si, Al, Ca and Fe oxides are scattered on the activated carbon. Active components are still uniformly absorbed on activated carbon after catalyst deactivation.展开更多
Dielectric properties were measured using cavity perturbation method. The temperature rising behaviors of molybdenite concentrate were investigated in the field of microwave. This process was conducted to show the mic...Dielectric properties were measured using cavity perturbation method. The temperature rising behaviors of molybdenite concentrate were investigated in the field of microwave. This process was conducted to show the microwave absorption properties of molybdenite concentrate and the feasibility of microwave roasting molybdenite concentrate to prepare high purity MOO3. The dielectric constant,dielectric loss,and loss tangent increase from 3. 51 to 5. 04,0. 22 to 0. 51 and 0. 065 to 0. 102 respectively. They are proportional to the apparent density of molybdenite concentrate in the range of 0. 9-1. 4 g/cm3. The results show that the molybdenite concentrate has good microwave absorption capacity in the conventional density range. The temperature rising curves show that the apparent heating rate of the molybdenite concentrate increases with the increase in microwave power and decreases with the increase in the sample mass and thickness. The temperature of concentrate sample of 100 g reaches approximately 800 ℃ after 5 min of microwave treatment at 0. 5 kW of power. Our findings show that it is feasible to prepare high-purity MOO3from molybdenite concentrate by microwave roasting.展开更多
The methylene blue(MB)removal abilities of raw activated carbon and iron/cerium modified raw activated carbon(Fe–Ce-AC)by adsorption were researched and compared.The characteristics of Fe–Ce-AC were examined by ...The methylene blue(MB)removal abilities of raw activated carbon and iron/cerium modified raw activated carbon(Fe–Ce-AC)by adsorption were researched and compared.The characteristics of Fe–Ce-AC were examined by N2adsorption,zeta potential measurement,FTIR,Raman,XRD,XPS,SEM and EDS.After modification,the following phenomena occurred:The BET surface area,average pore diameter and total pore volume decreased;the degree of graphitization also decreased.Moreover,the presence of Fe3O4led to Fe–Ce-AC having magnetic properties,which makes it easy to separate from dye wastewater in an external magnetic field and subsequently recycle.In addition,the equilibrium isotherms and kinetics of MB adsorption on raw activated carbon and Fe–Ce-AC were systematically examined.The equilibrium adsorption data indicated that the adsorption behavior followed the Langmuir isotherm,and the pseudo-second-order model matched the kinetic data well.Compared with raw activated carbon,the maximum monolayer adsorption capacity of Fe–Ce-AC increased by27.31%.According to the experimental results,Fe–Ce-AC can be used as an effective adsorbent for the removal of MB from dye wastewater.展开更多
Tin oxide(SnO2) hollow microspheres with narrow size distribution were prepared by a facile one-pot microwave-assisted spray pyrolysis method. The effect of temperature on microstructural and optical properties was ...Tin oxide(SnO2) hollow microspheres with narrow size distribution were prepared by a facile one-pot microwave-assisted spray pyrolysis method. The effect of temperature on microstructural and optical properties was investigated by X-ray diffraction(XRD), scanning electron microscope(SEM), high resolution transmission electron microscope(HRTEM), and UV-Vis spectrophotometer(UV-Vis), respectively.The SnO2 particles obtained at and above 700?C are tetragonal rutile structure with high purity and smooth surface morphology, which consist of well-interconnected SnO2 nanocrystallines and the shell thickness was about 26 nm. UV-Vis absorption values were quite low in visible light region and high in ultraviolet region, indicating the possible utilization for optical purpose of the as-prepared SnO2. The band gaps were 3.88 and 4.07 e V for SnO2 synthesized at 700 and 800?C, respectively. As compared to traditional electrical heating or flame modes, microwave heating introduced here demonstrates a highefficiency, environmentally benign, and time-and energy-saving technology to synthesize advanced powders.展开更多
The incremental improved Back-Propagation (BP) neural network prediction model using the Levenberg-Marquardt algorithm based on optimizing theory is put forward, which can solve the problems existing in the process ...The incremental improved Back-Propagation (BP) neural network prediction model using the Levenberg-Marquardt algorithm based on optimizing theory is put forward, which can solve the problems existing in the process of calcinations for ammonium diuranate (ADU) by microwave heating, such as long testing cycle, high testing quan- tity, difficulty of optimization for process parameters. Many training data probably were offered by the way of increment batch and the limitation of the system mem- ory could make the training data infeasible when the sample scale was large. The prediction model of the nonlinear system is built, which can effectively predict the experiment of microwave calcining of ADU, and the incremental improved BP neural network is very useful in overeoining the local minimum problem, finding the global optimal solution and accelerating the convergence speed.展开更多
基金Sponsored by the National Natural Science Foundation-Yunnan Joint Fund Project of China(Grant No.U1402274)the National Natural Science Foundation of China(Grant No.51564033)+1 种基金the Yunnan Applied Basic Research Project(Grant No.2016FA023)the State Key Laboratory of Complex Nonferrous M etal Resources Clean Utilization,Kunming University of Science and Technology(Grant No.CNM RCUXT1403)
文摘The magnetic hysteresis loop was measured to know the magnetic property of molybdenite concentrate.In order to evaluate its microwave absorption capacity, the dielectric properties of molybdenite concentrate was investigated using cavity perturbation method at 915 MHz dependent on densities and temperatures.The parameter data were fitted using regression fit and a model related to the same density and temperature ranges was developed.A nonlinear surface fitting was used to present visually the effect of dielectric parameters on the microwave penetrate depth of molybdnite concentrate.The crystal products of MoO 3 obtained from microwave roasting at different temperatures were examined by scanning electron microscopy (SEM) and X-ray diffraction (XRD).The results show both the dielectric constants and loss factors increase in the increase of apparent densities and temperatures with different growth rates in the experimental range.Due to the distinguished trend of dielectric performance dependent on temperatures, two parts in the heating scenario for the molybdenite concentrate samples were divided.The microwave penetration depth is inversely proportional to both apparent densities and temperatures.The nonlinear fitting surfaces indicate the increase of dielectric loss provides an enough decrease in microwave penetration depth.In contrast, the dielectric constant has a positive effect for it.Pure MoO 3 was produced at 800 ℃ by using microwave energy.This work can be helpful to design and simulate microwave system for efficient beneficiation of molybdenite concentrate and to prepare molybdenum products from this concentrate.
基金Supported by the National Science Fund for Excellent Young Scholars of China(No.51522405)
文摘Mercury-containing catalysts are widely used for acetylene hydrochlorination in China. Surface chemical characteristics of the fresh low-level mercury catalysts and spent low-level mercury catalysts were compared using multiple characterization methods. Pore blockage and active site coverage caused by chlorine-containing organics are responsible for catalyst deactivation. The reactions of chloroethylene and acetylene with chlorine free radical can generate chlorine-containing organic species. SiO_2 and functional groups on activated carbon contribute to the generation of carbon deposition. No significant reduction in the total content of mercury was observed after catalyst deactivation, while there was mercury loss locally. The irreversible loss of HgCl_2 caused by volatilization, reduction and poisoning of elements S and P also can lead to catalyst deactivation. Si, Al, Ca and Fe oxides are scattered on the activated carbon. Active components are still uniformly absorbed on activated carbon after catalyst deactivation.
基金Supported by the National Natural Science Foundation-Yunnan Joint Fund Project of China(U1402274)the National Natural Science Foundation of China(51564033)Yunnan Applied Basic Research Project(2016FA023)
文摘Dielectric properties were measured using cavity perturbation method. The temperature rising behaviors of molybdenite concentrate were investigated in the field of microwave. This process was conducted to show the microwave absorption properties of molybdenite concentrate and the feasibility of microwave roasting molybdenite concentrate to prepare high purity MOO3. The dielectric constant,dielectric loss,and loss tangent increase from 3. 51 to 5. 04,0. 22 to 0. 51 and 0. 065 to 0. 102 respectively. They are proportional to the apparent density of molybdenite concentrate in the range of 0. 9-1. 4 g/cm3. The results show that the molybdenite concentrate has good microwave absorption capacity in the conventional density range. The temperature rising curves show that the apparent heating rate of the molybdenite concentrate increases with the increase in microwave power and decreases with the increase in the sample mass and thickness. The temperature of concentrate sample of 100 g reaches approximately 800 ℃ after 5 min of microwave treatment at 0. 5 kW of power. Our findings show that it is feasible to prepare high-purity MOO3from molybdenite concentrate by microwave roasting.
基金the Specialized Research Fund for the National Natural Science Foundation of China (Nos.21567013, 51504119)the National High Technology Research and Development Program (863) of China (No. 2015AA020201)+1 种基金the Yunnan Applied Basic Research Project (No.2015FB129)the Yunnan Provincial Science and Technology Innovation Talents Scheme Technological Leading Talent (No.2013HA002)
文摘The methylene blue(MB)removal abilities of raw activated carbon and iron/cerium modified raw activated carbon(Fe–Ce-AC)by adsorption were researched and compared.The characteristics of Fe–Ce-AC were examined by N2adsorption,zeta potential measurement,FTIR,Raman,XRD,XPS,SEM and EDS.After modification,the following phenomena occurred:The BET surface area,average pore diameter and total pore volume decreased;the degree of graphitization also decreased.Moreover,the presence of Fe3O4led to Fe–Ce-AC having magnetic properties,which makes it easy to separate from dye wastewater in an external magnetic field and subsequently recycle.In addition,the equilibrium isotherms and kinetics of MB adsorption on raw activated carbon and Fe–Ce-AC were systematically examined.The equilibrium adsorption data indicated that the adsorption behavior followed the Langmuir isotherm,and the pseudo-second-order model matched the kinetic data well.Compared with raw activated carbon,the maximum monolayer adsorption capacity of Fe–Ce-AC increased by27.31%.According to the experimental results,Fe–Ce-AC can be used as an effective adsorbent for the removal of MB from dye wastewater.
基金supported by the project from the National Natural Science Foundation of China(Nos.51264015 and 51404116)the Yunnan Provincial Science and Technology Innovation Talents Scheme-Technological Leading Talent(No.2013HA002)
文摘Tin oxide(SnO2) hollow microspheres with narrow size distribution were prepared by a facile one-pot microwave-assisted spray pyrolysis method. The effect of temperature on microstructural and optical properties was investigated by X-ray diffraction(XRD), scanning electron microscope(SEM), high resolution transmission electron microscope(HRTEM), and UV-Vis spectrophotometer(UV-Vis), respectively.The SnO2 particles obtained at and above 700?C are tetragonal rutile structure with high purity and smooth surface morphology, which consist of well-interconnected SnO2 nanocrystallines and the shell thickness was about 26 nm. UV-Vis absorption values were quite low in visible light region and high in ultraviolet region, indicating the possible utilization for optical purpose of the as-prepared SnO2. The band gaps were 3.88 and 4.07 e V for SnO2 synthesized at 700 and 800?C, respectively. As compared to traditional electrical heating or flame modes, microwave heating introduced here demonstrates a highefficiency, environmentally benign, and time-and energy-saving technology to synthesize advanced powders.
基金supported by the National Natural Science Foundation of China (No.50734007)Technology Project of Yunnan Province (No.2007GA002)
文摘The incremental improved Back-Propagation (BP) neural network prediction model using the Levenberg-Marquardt algorithm based on optimizing theory is put forward, which can solve the problems existing in the process of calcinations for ammonium diuranate (ADU) by microwave heating, such as long testing cycle, high testing quan- tity, difficulty of optimization for process parameters. Many training data probably were offered by the way of increment batch and the limitation of the system mem- ory could make the training data infeasible when the sample scale was large. The prediction model of the nonlinear system is built, which can effectively predict the experiment of microwave calcining of ADU, and the incremental improved BP neural network is very useful in overeoining the local minimum problem, finding the global optimal solution and accelerating the convergence speed.