Corrosion engineering on AlCoCrFeNi high-entropy alloys toward highly efficient electrocatalysts for the oxygen evolution of alkaline seawater

Seawater splitting is a prospective approach to yield renewable and sustainable hydrogen energy.Complex preparation processes and poor repeatability are currently considered to be an insuperable impediment to the promotion of the large-scale production and application of electrocatalysts.Avoiding the use of intricate instruments,corrosion engineering is an intriguing strategy to reduce the cost and presents considerable potential for electrodes with catalytic performance.An anode comprising quinary AlCoCrFeNi layered double hydroxides uniformly decorated on an AlCoCrFeNi high-entropy alloy is proposed in this paper via a one-step corrosion engineering method,which directly serves as a remarkably active catalyst for boosting the oxygen evolution reaction(OER)in alkaline seawater.Notably,the best-performing catalyst exhibited oxygen evolution reaction activity with overpotential values of 272.3 and 332 mV to achieve the current densities of 10 and100 mA·cm^(-2),respectively.The failure mechanism of the obtained catalyst was identified for advancing the development of multicomponent catalysts.

Effects of nanoscale Sn segregation on corrosion behavior of laser powder bed fusion Cu-15Ni-8Sn alloy

Corrosion resistance of laser powder bed fusion(LPBF)Cu-15Ni-8Sn alloys is crucial towards its practical application in marine engineering.In this work,corrosion behavior of LPBF Cu-15Ni-8Sn alloy was com-prehensively investigated.The results suggest that LPBF Cu-15Ni-8Sn alloy exhibits superior corrosion re-sistance than the conventional casting counterpart and their corrosion behavior is highly associated with Sn segregation.Generally,a triple-layer film will be formed on the surface of LPBF Cu-15Ni-8Sn alloy when being exposed to 3.5 wt%NaCl solution.To be more detailed,the abundance of nanoscale Sn-rich precipitates at the molten pool boundaries promotes the initial formation of a thick inner layer,where Ni and Sn tend to be distributed at inner and outer positions of the layer,respectively.In contrast,the inner layer on molten pools is much thinner ascribed to a lower Sn content,facilitating the earlier nucleation and growth of a compact middle layer that is mainly composed of numerous Cu-rich nanoparticles.At the outmost position,CuO,Cu(OH)_(2) and Ni(OH)_(2) constitute the major composition of the loose layer.The results of this study could contribute to the optimal design and processing of additively manufactured Cu-Ni-Sn alloys.