镁造孔多孔NiTi合金的微波烧结制备与表征

为了获得轻质、高强和高阻尼的多孔NiTi合金,采用微波烧结协同镁造孔技术制备多孔NiTi合金。考察多孔NiTi合金的显微组织、力学性能、相变行为、超弹性和阻尼性能。结果表明:当烧结温度低于或等于900℃时,多孔NiTi合金主要由B2 NiTi相和少量B19'NiTi相组成。随着烧结温度的升高,多孔NiTi合金的孔隙率逐渐降低,而压缩强度先增加后下降,在900℃时获得最大值。随着造孔剂Mg的含量从1%增加到7%(质量分数),多孔NiTi合金的孔隙率从37.8%增加到47.1%,而压缩强度从2058 MPa降低至1146 MPa。与碳酸氢铵造孔多孔NiTi合金相比,镁造孔多孔NiTi合金的相变行为发生变化,而压缩强度、超弹性、形状记忆效应和阻尼性能均获得极大的提高。

Gut-lung crosstalk in pulmonary involvement with inflammatory bowel diseases

Pulmonary abnormalities,dysfunction or hyper-reactivity occurs in association with inflammatory bowel disease(IBD) more frequently than previously recognized.Emerging evidence suggests that subtle inflammation exists in the airways among IBD patients even in the absence of any bronchopulmonary symptoms,and with normal pulmonary functions. The pulmonary impairment is more pronounced in IBD patients with active disease than in those in remission. A growing number of case reports show that the IBD patients develop rapidly progressive respiratory symptoms after colectomy,with failure to isolate bacterial pathogens on repeated sputum culture,and often request oral corticosteroid therapy. All the above evidence indicates that the inflammatory changes in both the intestine and lung during IBD. Clinical or subclinical pulmonary inflammation accompanies the main inflammation of the bowel.Although there are clinical and epidemiological reports of chronic inflammation of the pulmonary and intestinal mucosa in IBD,the detailed mechanisms of pulmonaryintestinal crosstalk remain unknown. The lung has no anatomical connection with the main inflammatory site of the bowel. Why does the inflammatory process shift from the gastrointestinal tract to the airways? The clinical and subclinical pulmonary abnormalities,dysfunction,or hyper-reactivity among IBD patients need further evaluation. Here,we give an overview of the concordance between chronic inflammatory reactions in the airways and the gastrointestinal tract. A better understanding of the possible mechanism of the crosstalk among the distant organs will be beneficial in identifying therapeutic strategies for mucosal inflammatory diseases such as IBD and allergy.

Dynamic changes in peripheral blood-targeted miRNA expression profiles in patients with severe traumatic brain injury at high altitude

Background:The aim of this work is to detect and compare the peripheral blood mi RNA expression profiles in patients with severe traumatic brain injury(s TBI)2,12,24,48,and 72 h after injury at high altitude and to predict the target genes of differential expressed mi RNAs.Methods:Twenty s TBI patients from high-altitude areas were randomly selected according to the inclusion and exclusion criteria and were divided into five groups:the 2-h group,12-h group,24-h group,48-h group,and 72-h group.Peripheral blood mi RNA expression profiles were detected using real-time quantitative PCR(q RT-PCR).Results:The expression levels of mi R-18 a,mi R-203,mi R-146 a,mi R-149,mi R-23 b,and mi R-let-7 b in peripheral blood showed significant differences between the 2-h group and the 12-h group.The expression levels of mi R-203,mi R-146 a,mi R-149,mi R-23 b,and mi R-let-7 f in peripheral blood were up-regulated in the 24-h group.In the 48-h group,the expression levels of mi R-181 d,mi R-29 a,and mi R-18 b were upregulated.In the 72-h group,the expression levels of mi R-203,mi R-146 a,mi R-149,mi R-23 b,and mi R-let-7 f changed.The main target genes of the differentiation expressed mi RNAs were genes that regulate inflammatory responses,apoptosis,and DNA damage/repair.Conclusions:mi RNAs may be involved in the pathogenesis of s TBI by dynamically regulating the target genes that regulate inflammatory responses,apoptosis,and DNA damage/repair pathways.

Microstructure and properties of Y_2O_3-doped steel-cemented WC prepared by microwave sintering

Steel-cemented WC was prepared by ball milling, cold compacting and microwave sintering with Fe powder as the matrix, WC as the hard phase and the addition of rare earth Y2O3. The results show that the interface of the WC particles and Fe matrix exhibits excellent wettability and liquidity when the microwave sintering temperature reaches 1,280℃. The density and mechanical properties of the steel bonded WC carbides could be greatly improved, the hard phases become finer and more uniform dispersed owing to the addition of Y2O3. With the increase of the Y2O3 contents, the grain becomes uniform and fine first, and then gathers and grows up. The relative density, microhardness and bending strength all rise first, reaching the maximum values of 97.29 %, HV1024 and 1,267.60 MPa at 0.5 % Y2O3, respectively, and then decrease. Moreover, the relative density and mechanical properties of the steel-cemented WC with nano-Y2O3 are higher than that with micron-Y2O3, which indicates that the effect of nano-Y2O3 is better than that of the micron-Y2O3.

Changes of microcirculation in healthy volunteers and patients with septic shock in Xining

Objective: The purpose of this study is to investigate the characteristic of microcirculation in healthy volunteers and patients with septic shock in both Xining(2 260 m) and Nanjing(10 m). Methods: A total of 62 cases, 33 healthy volunteers, 22 cases in Xining,(2 260 m above sea level) and 11 cases in Nanjing(10 m above sea level); and 29 septic shock, 13 cases in Xining and 16 cases in Nanjing were collected. The total vessel density(TVD), perfused vessel density(PVD), proportion of perfused vessel(PPV) and microcirculation flow index(MFI) of both healthy volunteers and septic shock had been investigated by using sidestream dark field(SDF). Analyzed and managed the image data by using AVA3.0 software. Results: In the healthy volunteers in Xining area(22 cases),the volume of TVD(15.59 ± 2.58 mm/mm^2), PVD(15.58 ± 2.58 mm/mm^2) and PPV(96.60% ± 4.63%) were significant higher than the volume of TVD(10.0 ± 2.10 mm/mm^2), PVD(10.81 ± 2.38 mm/mm^2) and PPV(84.24% ± 8.00%) of the volunteers(11 cases) in Nanjing(11 cases). But the MFI(2.17 ± 0.31) of the healthy volunteers in the Xining was significant lower(P<0.05) than the MFI(3.21 ± 0.34) in the healthy volunteers of Nanjing. In the septic shock group(13 cases) in the Xining, the volume of TVD(5.44 ± 1.94 mm/mm^2), PVD(4.18 ± 1.61 mm/mm^2), PPV(42.14%± 5.38%) and MFI(1.05 ± 0.32) compared with the volume of the healthy volunteers in Xining, the TVD(15.59 ± 2.58 mm/mm^2), PVD(5.58 ± 2.58 mm/mm^2), PPV(96.60% ± 4.63%) and MFI(2.17 ± 0.30) were significant lower(P<0.05). In the healthy volunteers compare with septic shock group in Nanjing area, the TVD(6.80±1.72 vs 10.00±2.10, P<0.05), PVD(5.86±1.58 vs10.81±2.38,P<0.05), PPV(45.42±4.86 vs 84.24±4.86, P<0.05), MFI(1.28±0.28 vs 3.21±0.34 P<0.05), there was significant decreased. In the septic shock group in the Xining compared with the septic shock in Nanjing, there was no significant difference. 10 of 13 patients with septic shock were survived in Xining. 13 of 16 patients with septic shock were survived in Nanjing. Conclusion: The changes of physiological and pathophysiological characteristic in microcirculation induced by hypoxia would be useful for clinical treatment of septic shock at high altitude.

烧结NdFeB磁体表面Zn-Al/T8超疏水复合涂层的显微组织及耐蚀性

为提升烧结NdFeB磁体的耐蚀性,采用旋涂法和等离子体增强化学气相沉积技术在其表面制备Zn-Al/T8(2-全氟辛基乙基丙烯酸酯)超疏水复合涂层。结果表明,Zn-Al涂层主要由片层状的Zn和Al相组成,厚度大约为28μm。Zn-Al/T8复合涂层的接触角达到151.78°,而滚动角仅为5.13°,说明Zn-Al/T8复合涂层可提供一个超疏水表面。Zn-Al涂层和Zn-Al/T8复合涂层对烧结NdFeB的磁性能均无显著影响。Zn-Al涂层通过牺牲阳极来提高NdFeB磁体的耐蚀性,而Zn-Al/T8复合涂层通过超疏水表面进一步提升耐蚀性。Zn-Al/T8复合涂层较Zn-Al涂层具有更好的耐盐雾性能。Zn-Al/T8超疏水复合涂层是一种非常有前途的烧结NdFeB磁体保护涂层。

Preparation and characterization of TiO_2/acrylic resin composite coatings on sintered NdFeB permanent magnets by electrochemical deposition

The sintered Nd Fe B permanent magnets are widely used in various industries because of their excellent magnetic and comprehensive properties. However, they are seriously hindered to further developments and applications owing to its poor corrosion resistance. In this paper,TiO2/acrylic resin composite coatings were successfully prepared on the sintered Nd Fe B permanent magnets by electrochemical deposition for the first time, and the corrosion behaviors were investigated by using immersion testing and potentiodynamic polarization tests. It is found that the coating is a composite, being composed of polymerized acrylic resin as the matrix and nano-rutile TiO2particles（-200 nm） as the reinforcements. It is about25 lm in thickness and its surface and cross-section exhibit uniform and smooth with no pores, cracks, and other defects. Compared with those of the uncoated Nd Fe B magnets, the weight loss of the coated samples immersed in H2SO4 solution reduces by two orders of magnitude,corrosion current density decreases by four orders of magnitude, and the corrosion potential of the coated sample is shifted in the noble direction by 400 m V. The mechanisms of corrosive resistance enhancement were discussed.