As deep learning techniques such as Convolutional Neural Networks(CNNs)are widely adopted,the complexity of CNNs is rapidly increasing due to the growing demand for CNN accelerator system-on-chip(SoC).Although convent...As deep learning techniques such as Convolutional Neural Networks(CNNs)are widely adopted,the complexity of CNNs is rapidly increasing due to the growing demand for CNN accelerator system-on-chip(SoC).Although conventional CNN accelerators can reduce the computational time of learning and inference tasks,they tend to occupy large chip areas due to many multiply-and-accumulate(MAC)operators when implemented in complex digital circuits,incurring excessive power consumption.To overcome these drawbacks,this work implements an analog convolutional filter consisting of an analog multiply-and-accumulate arithmetic circuit along with an analog-to-digital converter(ADC).This paper introduces the architecture of an analog convolutional kernel comprised of low-power ultra-small circuits for neural network accelerator chips.ADC is an essential component of the analog convolutional kernel used to convert the analog convolutional result to digital values to be stored in memory.This work presents the implementation of a highly low-power and area-efficient 12-bit Successive Approximation Register(SAR)ADC.Unlink most other SAR-ADCs with differential structure;the proposed ADC employs a single-ended capacitor array to support the preceding single-ended max-pooling circuit along with minimal power consumption.The SARADCimplementation also introduces a unique circuit that reduces kick-back noise to increase performance.It was implemented in a test chip using a 55 nm CMOS process.It demonstrates that the proposed ADC reduces Kick-back noise by 40%and consequently improves the ADC’s resolution by about 10%while providing a near rail-to-rail dynamic rangewith significantly lower power consumption than conventional ADCs.The ADC test chip shows a chip size of 4600μm^(2)with a power consumption of 6.6μW while providing an signal-to-noise-and-distortion ratio(SNDR)of 68.45 dB,corresponding to an effective number of bits(ENOB)of 11.07 bits.展开更多
基金This work was supported by the National Research Foundation of Korea(NRF)grant funded by theKorea government(MSIT)(No.2022R1A5A8026986)and supported by Institute of Information&communications Technology Planning&Evaluation(IITP)grant funded by the Korea government(MSIT)(No.2020-0-01304,Development of Self-learnable Mobile Recursive Neural Network Processor Technology)+3 种基金It was also supported by the MSIT(Ministry of Science and ICT),Korea,under the Grand Information Technology Research Center support program(IITP-2022-2020-0-01462)supervised by the“IITP(Institute for Information&communications Technology Planning&Evaluation)”supported by the National Research Foundation of Korea(NRF)grant funded by the Korea government(MSIT)(No.2021R1F1A1061314)In addition,this work was conducted during the research year of Chungbuk National University in 2020.
文摘As deep learning techniques such as Convolutional Neural Networks(CNNs)are widely adopted,the complexity of CNNs is rapidly increasing due to the growing demand for CNN accelerator system-on-chip(SoC).Although conventional CNN accelerators can reduce the computational time of learning and inference tasks,they tend to occupy large chip areas due to many multiply-and-accumulate(MAC)operators when implemented in complex digital circuits,incurring excessive power consumption.To overcome these drawbacks,this work implements an analog convolutional filter consisting of an analog multiply-and-accumulate arithmetic circuit along with an analog-to-digital converter(ADC).This paper introduces the architecture of an analog convolutional kernel comprised of low-power ultra-small circuits for neural network accelerator chips.ADC is an essential component of the analog convolutional kernel used to convert the analog convolutional result to digital values to be stored in memory.This work presents the implementation of a highly low-power and area-efficient 12-bit Successive Approximation Register(SAR)ADC.Unlink most other SAR-ADCs with differential structure;the proposed ADC employs a single-ended capacitor array to support the preceding single-ended max-pooling circuit along with minimal power consumption.The SARADCimplementation also introduces a unique circuit that reduces kick-back noise to increase performance.It was implemented in a test chip using a 55 nm CMOS process.It demonstrates that the proposed ADC reduces Kick-back noise by 40%and consequently improves the ADC’s resolution by about 10%while providing a near rail-to-rail dynamic rangewith significantly lower power consumption than conventional ADCs.The ADC test chip shows a chip size of 4600μm^(2)with a power consumption of 6.6μW while providing an signal-to-noise-and-distortion ratio(SNDR)of 68.45 dB,corresponding to an effective number of bits(ENOB)of 11.07 bits.
