Brazing of WC–8Co cemented carbide to steel using Cu–Ni–Al alloys as filler metal: Microstructures and joint mechanical behavior

Three novel Cu-Ni-A1 brazing filler alloys with Cu/Ni weight ratio of 4：1 and 2.5-10 wt% Al were developed and characterized, and the wetting of three Cu-Ni-Al alloys on WC-8Co cemented carbide were investigated at 1190-1210 ℃ by the sessile drop technique. Vacuum brazing of the WC-8Co cemented carbide to SAE1045 steel using the three Cu-Ni-Al alloys as filler metal was further carried out based on the wetting test results. The interfacial interactions and joint mechanical behaviors involving microhardness, shear strength and fracture were analyzed and discussed. The experimental results show that all the three wetting systems present excellent wettability with final contact angles of less than 5 °and fast spreading. An obvious degeneration layer with continuous thin strip forms in the cemented carbide adjacent to the Cu-Ni-A1/WC-8Co interface. The variation of microhardness in the joint cross-section is closely related to the interactions （such as diffusion and solid solution） of WC-8Co/Cu-Ni-Al/steel sys- tem. Compared with the other two brazed joints, the WC-8Co/Cu-19Ni-SAl/steel brazed joint presents more reliable interlayer microstructure and mechanical property while brazing at the corresponding wetting temperatures for 5 rain, and its average shear strength is over 200 MPa after further optimizing the brazing temperature and holding time. The joint shear fracture path passes along the degeneration layer, Cu-Ni-A1/WC-8Co interface and brazing interlayer, showing a mixed ductile-brittle fracture.2018 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science ＆ Technology.

Efficient photocatalytic hydrogen evolution coupled with benzaldehyde production over 0D Cd_(0.5)Zn_(0.5)S/2D Ti_(3)C2 Schottky heterojunction

Converting water into hydrogen fuel and oxidizing benzyl alcohol to benzaldehyde simultaneously under visible light illumination is of great significance,but the fast recombination of photogenerated carriers in photocatalysts seriously decreases the conversion efficiency.Herein,a novel dual-functional 0D Cd_(0.5)Zn_(0.5)S/2D Ti_(3)C2 hybrid was fabricated by a solvothermally in-situ generated assembling method.The Cd_(0.5)Zn_(0.5)S nano-spheres with a fluffy surface completely and uniformly covered the ultrathin Ti_(3)C2 nanosheets,leading to the increased Schottky barrier(SB)sites due to a large contact area,which could accelerate the electron–hole separation and improve the light utilization.The optimized Cd_(0.5)Zn_(0.5)S/Ti_(3)C2 hybrid simultaneously presents a hydrogen evolution rate of 5.3 mmol/(g·h)and a benzaldehyde production rate of 29.3 mmol/(g·h),which are~3.2 and 2 times higher than those of pristine Cd_(0.5)Zn_(0.5)S,respectively.Both the multiple experimental measurements and the density functional theory(DFT)calculations further demonstrate the tight connection between Cd_(0.5)Zn_(0.5)S and Ti_(3)C2,formation of Schottky junction,and efficient photogenerated electron–hole separation.This paper suggests a dual-functional composite catalyst for photocatalytic hydrogen evolution and benzaldehyde production,and provides a new strategy for preventing the photogenerated electrons and holes from recombining by constructing a 0D/2D heterojunction with increased SB sites.