Coal,one of the fossil fuels which is burned for heat,contributes a quarter of the world’s primary energy and two-fifths of its electricity.According to the World Energy Model(WEM)provided by the International Energy...Coal,one of the fossil fuels which is burned for heat,contributes a quarter of the world’s primary energy and two-fifths of its electricity.According to the World Energy Model(WEM)provided by the International Energy Agency(IEA),the total primary energy demand from coal reached 3750 Mtoe in 2017,and its growth rate will decrease a lot in the future 10–20 years.Nevertheless,coal will remain as the main primary energy in the next few decades.展开更多
Co-gasification of industrial sludge(IS)and coal was an effective approach to achieve harmless and sustainable utilization of IS.The long-term and stable operation of a co-gasification largely depends on fluidity of c...Co-gasification of industrial sludge(IS)and coal was an effective approach to achieve harmless and sustainable utilization of IS.The long-term and stable operation of a co-gasification largely depends on fluidity of coal-ash slag.Herein,the effects of IS addition on the crystallization and viscosity of Shuangmazao(SMZ)coal were investigated by means of high temperature stage coupled with an optical microscope(HTSOM),a scanning electron microscopy coupled with an energy dispersive Xray spectrometry(SEM-EDS),X-ray diffraction(XRD),a Fourier transform infrared spectrometer(FTIR),and FactSage software.The results showed that when the proportion of IS was less than 60%,with the addition of IS,the slag existed in an amorphous form.This was due to the high content of SiO_(2) and Al_(2)O_(3) in SMZ ash and blended ash,which had a high glass-forming ability(GFA).The slag formed at a high temperature had a higher polymerization degree and viscosity,which led to a decrease in the migration ability between ions,and ultimately made the slag difficult to crystallize during the cooling.When the proportion of IS was higher than 60%,the addition of IS increased the CaO and FeO content in the system.As network modifiers,CaO and FeO could provide O^(2−)at a high temperature,which reacted with silicate network structure and continuously destroyed the complexity of network structure,thus reducing the polymerization degree and viscosity of slag.At this time,the migration ability between ions was enhanced,and needle-shaped/rod-shaped crystals were precipitated during the cooling process.Finally,the viscosity calculated by simulation and Einstein-Roscoe empirical formula demonstrated that the addition of IS could significantly improve the fluidity of coal ash and meet the requirements of the liquid slag-tapping gasifier.The purpose of this work was to provide theoretical support for slag flow mechanisms during the gasifier slagging-tapping process and the resource treatment of industrial solid waste.展开更多
文摘Coal,one of the fossil fuels which is burned for heat,contributes a quarter of the world’s primary energy and two-fifths of its electricity.According to the World Energy Model(WEM)provided by the International Energy Agency(IEA),the total primary energy demand from coal reached 3750 Mtoe in 2017,and its growth rate will decrease a lot in the future 10–20 years.Nevertheless,coal will remain as the main primary energy in the next few decades.
基金supported by the project of Key Research Plan of Ningxia(2019BEB04030 and 2019BCH01001)the project of CHN Energy Ningxia Coal Industry Co.,Ltd.(NXMY2112).
文摘Co-gasification of industrial sludge(IS)and coal was an effective approach to achieve harmless and sustainable utilization of IS.The long-term and stable operation of a co-gasification largely depends on fluidity of coal-ash slag.Herein,the effects of IS addition on the crystallization and viscosity of Shuangmazao(SMZ)coal were investigated by means of high temperature stage coupled with an optical microscope(HTSOM),a scanning electron microscopy coupled with an energy dispersive Xray spectrometry(SEM-EDS),X-ray diffraction(XRD),a Fourier transform infrared spectrometer(FTIR),and FactSage software.The results showed that when the proportion of IS was less than 60%,with the addition of IS,the slag existed in an amorphous form.This was due to the high content of SiO_(2) and Al_(2)O_(3) in SMZ ash and blended ash,which had a high glass-forming ability(GFA).The slag formed at a high temperature had a higher polymerization degree and viscosity,which led to a decrease in the migration ability between ions,and ultimately made the slag difficult to crystallize during the cooling.When the proportion of IS was higher than 60%,the addition of IS increased the CaO and FeO content in the system.As network modifiers,CaO and FeO could provide O^(2−)at a high temperature,which reacted with silicate network structure and continuously destroyed the complexity of network structure,thus reducing the polymerization degree and viscosity of slag.At this time,the migration ability between ions was enhanced,and needle-shaped/rod-shaped crystals were precipitated during the cooling process.Finally,the viscosity calculated by simulation and Einstein-Roscoe empirical formula demonstrated that the addition of IS could significantly improve the fluidity of coal ash and meet the requirements of the liquid slag-tapping gasifier.The purpose of this work was to provide theoretical support for slag flow mechanisms during the gasifier slagging-tapping process and the resource treatment of industrial solid waste.