Flexible, Porous, and Metal–Heteroatom?Doped Carbon Nanofibers as Efficient ORR Electrocatalysts for Zn–Air Battery

Developing an e cient and durable oxygen reduction electrocatalyst is critical for clean-energy technology, such as fuel cells and metal–air batteries. In this study, we developed a facile strategy for the preparation of flexible, porous, and well-dispersed metal–heteroatom-doped carbon nanofibers by direct carbonization of electrospun Zn/Co-ZIFs/PAN nanofibers(Zn/Co-ZIFs/PAN). The obtained Zn/Co and N co-doped porous carbon nanofibers carbonized at 800 °C(Zn/Co–N@PCNFs-800) presented a good flexibility, a continuous porous structure, and a superior oxygen reduction reaction(ORR) catalytic activity to that of commercial 20 wt% Pt/C, in terms of its onset potential(0.98 V vs. RHE), half-wave potential(0.89 V vs. RHE), and limiting current density(-5.26 mA cm^(-2)). In addition, we tested the suitability and durability of Zn/Co–N@PCNFs-800 as the oxygen cathode for a rechargeable Zn–air battery. The prepared Zn–air batteries exhibited a higher power density(83.5 mW cm^(-2)), a higher specific capacity(640.3 mAh g^(-1)), an excellent reversibility, and a better cycling life than the commercial 20 wt% Pt/C + RuO_2 catalysts. This design strategy of flexible porous non-precious metal-doped ORR electrocatalysts obtained from electrospun ZIFs/polymer nanofibers could be extended to fabricate other novel, stable, and easy-to-use multi-functional electrocatalysts for clean-energy technology.

Investigation on the Tribology of Co Implanted Stainless Steel Using Metal Vapor Vacuum Arc Ion Source

AISI 304 stainless steel was ion implanted with Co, and the tribological property on the surface of the stainless steelwas investigated. The Co ion implantation was carried out using a metal vapor vacuum arc (Mevva) broad-beam ionsource with an extraction voltage of 40 kV, implantation doses of 3×10^(17)/cm^2 and 5×10^(17)/cm^2, and ion currentdensities of 13, 22 and 32μA/cm^2. The results showed that the near-surface hardness of Co-implanted stainless steelsample was increased by 50% or more, and it increased with increasing ion current density at first and then declined.The friction coefficient decreased from 0.74 to 0.20 after Co implantation. The wear rate after Co implantationreduced by 25% or more as compared to the unimplanted sample. The wear rate initially decreased with increasingion current density and then an increase was observed. Within the range of experimental parameters, there existsa critical ion current density for the Co-implanted stainless steel, at which the wear rate decreased with increasingretained dose, going through a minimum and then increased. The critical ion current density in this paper is about22μA/cm^2.

Fish scale-derived scaffolds with MSCs loading for photothermal therapy of bone defect

Tissue engineering scaffolds have presented effective value in bone repair.However,the integration of the diverse components,complex structures,multifunction to impart the scaffolds with improved applicability is still a challenge.Here,we propose a novel fish-derived scaffold combined with photothermal therapy and mesenchymal stem cells(MSCs)to promote bone regeneration.The fish-derived scaffold is composed of the decellularized fish scale and gelatin methacrylate synthesized from fish gelatin(fGelMA),which can promote the proliferation and osteogenesis of MSCs with no obvious immunological rejection.Furthermore,the black phosphorus(BP)nanosheets are incorporated into the fGelMA hydrogel network,which can endow the hydrogel with the capacity of photothermal conversion stimulated by near-infrared(NIR)light.The fish-derived scaffold can promote the osteogenesis process of MSCs with higher expression of osteogenic markers and higher mineralization assisted by the NIR light in vitro.The regeneration of mice calvarial defect has also been accelerated by the scaffold with photothermal therapy and MSCs.These results suggest that the fish-derived scaffold,photothermal therapy,MSCs-based regenerative therapy is a promising clinical strategy in bone regeneration.

Behavior Model Construction for Client Side of Modern Web Applications

Most of the behavior models with respect to Web applications focus on sequencing of events,without regard for the changes of parameters or elements and the relationship between trigger conditions of events and Web pages.As a result,these models are not sufficient to effectively represent the dynamic behavior of the Web2.0 application.Therefore,in this paper,to appropriately describe the dynamic behavior of the client side of Web applications,we define a novel Client-side Behavior Model(CBM)for Web applications and present a user behavior trace-based modeling method to automatically generate and optimize CBMs.To verify the effectiveness of our method,we conduct a series of experiments on six Web applications according to three types of user behavior traces.The experimental results show that our modeling method can construct CBMs automatically and effectively,and the CBMs built are more precise to represent the dynamic behavior of Web applications.