期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
加压循环流化床富氧燃烧中试研究 被引量:5
1
作者 孔润娟 李伟 +1 位作者 任强强 刘志成 《洁净煤技术》 CAS 北大核心 2021年第2期225-230,共6页
二氧化碳捕集和封存技术(CCUS)是减少温室气体排放,实现全球环境可持续发展的有效技术手段。加压富氧燃烧技术是一种低成本CCUS技术。循环流化床燃烧技术(CFB)是目前商业化程度最好的清洁煤燃烧技术之一,加压循环流化床富氧燃烧耦合了... 二氧化碳捕集和封存技术(CCUS)是减少温室气体排放,实现全球环境可持续发展的有效技术手段。加压富氧燃烧技术是一种低成本CCUS技术。循环流化床燃烧技术(CFB)是目前商业化程度最好的清洁煤燃烧技术之一,加压循环流化床富氧燃烧耦合了加压富氧燃烧和循环流化床燃烧的诸多优点,具有很强的工业应用前景。但加压循环流化床富氧燃烧系统结构复杂,燃烧工况的切换和烟气再循环导致其在启动、控制、运行等方面面临巨大挑战。目前对于加压循环流化床富氧燃烧的研究大多处于理论建模、机理研究和小试试验阶段。为了更深入地探究加压循环流化床富氧燃烧的启动和运行方法,中国科学院工程热物理研究所在MW级加压循环流化床富氧燃烧中试试验平台上进行了中试研究,实现了加压富氧燃烧的稳定运行,获得了中试尺度加压富氧燃烧运行模式,以及启动和运行过程中温度、压力、给煤量和风量的变化曲线。加压富氧燃烧工况运行中整体O_(2)体积分数为29%,压力为0.30 MPa,功率为0.84 MW,尾部烟气中CO_(2)体积分数达91%,可较好地实现CO_(2)产品的捕集和压缩纯化。中试尺度加压富氧燃烧启动和运行的主要流程为:启动阶段-常压O_(2)/N_(2)燃烧阶段-常压富氧燃烧-加压富氧燃烧阶段,各阶段切换平稳。 展开更多
关键词 加压富氧燃烧 循环流化床锅炉 中试试验 运行模式
下载PDF
25 MW循环流化床富氧燃烧系统经济性分析
2
作者 孔润娟 李伟 《煤质技术》 2021年第2期20-25,31,共7页
富氧燃烧技术被认为是最具发展前景的CO_(2)捕集封存技术之一,但存在空分系统和CO_(2)压缩纯化系统2个能耗单元,限制富氧燃烧技术的工业化应用。研究利用Aspen Plus建立25 MW循环流化床富氧燃烧系统全流程模型,从空气分离系统、循环流... 富氧燃烧技术被认为是最具发展前景的CO_(2)捕集封存技术之一,但存在空分系统和CO_(2)压缩纯化系统2个能耗单元,限制富氧燃烧技术的工业化应用。研究利用Aspen Plus建立25 MW循环流化床富氧燃烧系统全流程模型,从空气分离系统、循环流化床富氧燃烧和换热系统、二氧化碳压缩纯化系统简介经济学模型,并对其进行模型验证。模拟结果表明:富氧燃烧时烟气中CO_(2)、H_(2)O和SO_(2)排放量均高于空气燃烧,而NO排放量远低于空气燃烧;通过能效分析和经济性评估发现,在相同炉膛尺寸下,净发电功率随富氧燃烧氧气浓度的升高而增加,氧气浓度从30%增加到50%时净发电功率从17.3 MW增至30.3 MW;综合考虑碳税和碳销售分别为163¥/t和160¥/t时,富氧燃烧电站系统的供电成本远低于空气燃烧,且随氧气浓度的升高而降低,如当氧气浓度为50%时,供电成本比氧气浓度为30%时下降了13.4%。高浓度富氧燃烧在能效和经济性上具有明显优势。 展开更多
关键词 循环流化床 富氧燃烧 经济性分析 高氧气浓度 过程模拟 经济学模型 空气燃烧 能效分析
下载PDF
Energy Efficiency Analysis of Oxy-Fuel Circulating Fluidized Bed Combustion System with High Oxygen Concentration
3
作者 kong runjuan LI Wei +1 位作者 WANG Haigang REN Qiangqiang 《Journal of Thermal Science》 SCIE EI CAS CSCD 2023年第5期1737-1749,共13页
The low net efficiency of oxy-fuel circulating fluidized bed(CFB)combustion is mainly due to the addition of air separation unit(ASU)and carbon dioxide compression and purification unit(CPU).High oxygen concentration ... The low net efficiency of oxy-fuel circulating fluidized bed(CFB)combustion is mainly due to the addition of air separation unit(ASU)and carbon dioxide compression and purification unit(CPU).High oxygen concentration is one of the effective methods to improve the net efficiency of oxy-fuel combustion technology in CFB.In this research,a series of calculation and simulation were carried out based on Aspen Plus platform to provide valuable information for further investigation on the CFB oxy-fuel combustion system with high oxygen concentration(40%,50%).A CFB oxy-fuel combustion system model with high oxygen concentration was established including ASU,CPU and CFB oxy-fuel combustion and heat exchange unit.Based on the simulation data,energy and exergy efficiency were analyzed to obtain the following results.The cross-sectional area of furnace and tail flue of 50%CFB oxy-fuel combustion boiler are 43%and 56%of the original size respectively,reducing the construction and investment cost effectively.With the increase of oxygen concentration,the net efficiency of power generation increased significantly,reaching 24.85%and increasing by 6.09%under the condition of 50%oxy-fuel combustion.The total exergy loss increases with the increase of oxygen concentration.In addition,the exergy loss of radiation heat transfer is far higher than convection heat transfer. 展开更多
关键词 circulating fluidized bed oxy-fuel combustion high oxygen concentration process simulation
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部