[Objectives]This study aimed to analyze the sustainable use of agricultural land in the Chengdu metropolitan area from 2006 to 2016.[Methods]Using Odum's emergy theory,an index system was constructed to evaluate t...[Objectives]This study aimed to analyze the sustainable use of agricultural land in the Chengdu metropolitan area from 2006 to 2016.[Methods]Using Odum's emergy theory,an index system was constructed to evaluate the sustainable use of agricultural land,including total emergy input-output ratio,industrial emergy input-output ratio,environmental load index and sustainable use index of agricultural land based on emergy,to reflect the sustainable use of agricultural land in the Chengdu metropolitan area.The data base was a unified standard that was converted from various types of energy stored and flowing in the agricultural land system of the Chengdu metropolitan area,that is,emergy.[Results]From 2006 to 2016,the total emergy input-output ratio of agricultural land in the metropolitan area fluctuated and decreased,lower than the national average.The industrial emergy input-output ratio was generally in a fluctuating downward trend.The environmental load index of agricultural land in the metropolitan area was lower than the national average.However,it has been on the rise since 2012.During the corresponding period,the sustainable use index of the region also showed a downward trend.[Conclusions]The utilization rate of emergy in this area was low.The dependence of industrial emergy input-output ratio on industrial subsidiary energy and the degree of agricultural mechanization are constantly improving.The environmental resources in this area still have room for accommodation and have not been fully utilized.The sustainable use of agricultural land has been declining.展开更多
Understanding the economic feasibility of cross-laminated timber(CLT),an emerging and sustainable alternative to concrete and steel,is critical for the rapid expansion of the mass timber industry.However,previous stud...Understanding the economic feasibility of cross-laminated timber(CLT),an emerging and sustainable alternative to concrete and steel,is critical for the rapid expansion of the mass timber industry.However,previous studies on economic performance of CLT have not fully considered the variations in the feedstock,plant capacities,manu-facturing parameters,and capital and operating costs.This study fills this gap by developing a techno-economic analysis of producing CLT panels in the Southern United States.The effects of those variations on minimum sell-ing price(MSP)of CLT panels are explored by Monte Carlo simulation.The results show that,across all the plant capacities from 30,000 to 150,000 m^(3)/year,the MSP ranges from$345 to$609/m^(3) with a±6%–9%range caused by the variations in feedstocks,key manufacturing parameters,capital and operating cost.The MSP decreases sig-nificantly along the increasing capacities.A sensitivity analysis exhibits that the lumber price,lumber preparing loss,plant capacity,and the installed costs of layering and gluing,finishing,and miscellaneous,are the top driving factors to CLT MSP.Supported by Geographic Information System,this study also studies the transportation cost of delivering CLT to customers under three CLT demanding levels(1%,5%,15%).The results show that the trans-portation cost is 1%–8%of the MSP.Lower demanding level or higher plant capacity can increase the transporta-tion cost due to average longer delivering distance.When considering the delivered cost that sums MSP and transportation cost,larger plant capacity does not necessarily generate lower delivered cost.展开更多
Effects of quenching temperature and cooling conditions(water cooling and 10%NaCl cooling)on microstructure and mechanical properties of a 0.2%Ti low alloy martensitic wear-resistant steel used for die casting ejector...Effects of quenching temperature and cooling conditions(water cooling and 10%NaCl cooling)on microstructure and mechanical properties of a 0.2%Ti low alloy martensitic wear-resistant steel used for die casting ejector plate were investigated.The results show that lath martensite can be obtained after austenitizing in the range of 860-980℃and then water cooling.With an increase in austenitizing temperature,the precipitate content gradually decreases.The precipitates are mainly composed of TiC and Ti4C2S2,and their total content is between 1.15wt.%and 1.64wt.%.The precipitate phase concentration by water-cooling is higher than that by10%NaCl cooling due to the lower cooling rate of water cooling.As the austeniting temperature increases,the hardness and tensile strength of both water cooled and 10%NaCl cooled steels firstly increase and then decrease.The experimental steel exhibits the best comprehensive mechanical properties after being austenitized at 900℃,cooled by 10%NaCl,and then tempered at 200℃.Its hardness,ultimate tensile strength,and wear rate reach551.4 HBW,1,438.2 MPa,and 0.48×10^(-2)mg·m^(-1),respectively.展开更多
基金Humanities and Social Science Project of Education Department of Sichuan Province(CR1402)Construction Plan for Scientific Research and Innovation Teams in Universities of Sichuan Province(14TD0039)Innovation and Entrepreneurship Training Program for Undergraduates(201814389023).
文摘[Objectives]This study aimed to analyze the sustainable use of agricultural land in the Chengdu metropolitan area from 2006 to 2016.[Methods]Using Odum's emergy theory,an index system was constructed to evaluate the sustainable use of agricultural land,including total emergy input-output ratio,industrial emergy input-output ratio,environmental load index and sustainable use index of agricultural land based on emergy,to reflect the sustainable use of agricultural land in the Chengdu metropolitan area.The data base was a unified standard that was converted from various types of energy stored and flowing in the agricultural land system of the Chengdu metropolitan area,that is,emergy.[Results]From 2006 to 2016,the total emergy input-output ratio of agricultural land in the metropolitan area fluctuated and decreased,lower than the national average.The industrial emergy input-output ratio was generally in a fluctuating downward trend.The environmental load index of agricultural land in the metropolitan area was lower than the national average.However,it has been on the rise since 2012.During the corresponding period,the sustainable use index of the region also showed a downward trend.[Conclusions]The utilization rate of emergy in this area was low.The dependence of industrial emergy input-output ratio on industrial subsidiary energy and the degree of agricultural mechanization are constantly improving.The environmental resources in this area still have room for accommodation and have not been fully utilized.The sustainable use of agricultural land has been declining.
文摘Understanding the economic feasibility of cross-laminated timber(CLT),an emerging and sustainable alternative to concrete and steel,is critical for the rapid expansion of the mass timber industry.However,previous studies on economic performance of CLT have not fully considered the variations in the feedstock,plant capacities,manu-facturing parameters,and capital and operating costs.This study fills this gap by developing a techno-economic analysis of producing CLT panels in the Southern United States.The effects of those variations on minimum sell-ing price(MSP)of CLT panels are explored by Monte Carlo simulation.The results show that,across all the plant capacities from 30,000 to 150,000 m^(3)/year,the MSP ranges from$345 to$609/m^(3) with a±6%–9%range caused by the variations in feedstocks,key manufacturing parameters,capital and operating cost.The MSP decreases sig-nificantly along the increasing capacities.A sensitivity analysis exhibits that the lumber price,lumber preparing loss,plant capacity,and the installed costs of layering and gluing,finishing,and miscellaneous,are the top driving factors to CLT MSP.Supported by Geographic Information System,this study also studies the transportation cost of delivering CLT to customers under three CLT demanding levels(1%,5%,15%).The results show that the trans-portation cost is 1%–8%of the MSP.Lower demanding level or higher plant capacity can increase the transporta-tion cost due to average longer delivering distance.When considering the delivered cost that sums MSP and transportation cost,larger plant capacity does not necessarily generate lower delivered cost.
文摘Effects of quenching temperature and cooling conditions(water cooling and 10%NaCl cooling)on microstructure and mechanical properties of a 0.2%Ti low alloy martensitic wear-resistant steel used for die casting ejector plate were investigated.The results show that lath martensite can be obtained after austenitizing in the range of 860-980℃and then water cooling.With an increase in austenitizing temperature,the precipitate content gradually decreases.The precipitates are mainly composed of TiC and Ti4C2S2,and their total content is between 1.15wt.%and 1.64wt.%.The precipitate phase concentration by water-cooling is higher than that by10%NaCl cooling due to the lower cooling rate of water cooling.As the austeniting temperature increases,the hardness and tensile strength of both water cooled and 10%NaCl cooled steels firstly increase and then decrease.The experimental steel exhibits the best comprehensive mechanical properties after being austenitized at 900℃,cooled by 10%NaCl,and then tempered at 200℃.Its hardness,ultimate tensile strength,and wear rate reach551.4 HBW,1,438.2 MPa,and 0.48×10^(-2)mg·m^(-1),respectively.
