Ba0.8Sr0.2FeO3-δhas been surface-modified by the lithium-ion conductor Li1.4Al0.4Ti1.6(PO4)3via a facile mechanical fusion method. The annealing temperature during coating process shows a strong impact on the surface...Ba0.8Sr0.2FeO3-δhas been surface-modified by the lithium-ion conductor Li1.4Al0.4Ti1.6(PO4)3via a facile mechanical fusion method. The annealing temperature during coating process shows a strong impact on the surface morphology and chemical composition of Li(Ni0.6 Co0.2 Mn0.2)O2. The 600-?C annealed material exhibits the best cyclic stability at high charging cut-off voltage of 4.5 V(versus Li+/Li) with the capacity retention of 90.9% after 100 cycles, which is much higher than that of bare material(79%). Moreover, the rate capability and thermal stability are also improved by Li1.4Al0.4Ti1.6(PO4)3coating. The enhanced performance can be attributed to the improved stability of interface between Ba0.8Sr0.2FeO3-δand electrolyte by Li1.4Al0.4Ti1.6(PO4)3modification. The results of this work provide a possible method to design reliable cathode materials to achieve high energy density and long cycle life.展开更多
基金Project supported by the National Key Research and Development Program of China(Grant No.2017YFB0102004)the National Natural Science Foundation of China(Grant No.51822211)the State Grid Technology Project,China(Grant No.DG71-17-010)
文摘Ba0.8Sr0.2FeO3-δhas been surface-modified by the lithium-ion conductor Li1.4Al0.4Ti1.6(PO4)3via a facile mechanical fusion method. The annealing temperature during coating process shows a strong impact on the surface morphology and chemical composition of Li(Ni0.6 Co0.2 Mn0.2)O2. The 600-?C annealed material exhibits the best cyclic stability at high charging cut-off voltage of 4.5 V(versus Li+/Li) with the capacity retention of 90.9% after 100 cycles, which is much higher than that of bare material(79%). Moreover, the rate capability and thermal stability are also improved by Li1.4Al0.4Ti1.6(PO4)3coating. The enhanced performance can be attributed to the improved stability of interface between Ba0.8Sr0.2FeO3-δand electrolyte by Li1.4Al0.4Ti1.6(PO4)3modification. The results of this work provide a possible method to design reliable cathode materials to achieve high energy density and long cycle life.
