This work studies the amount of gaseous and particle emissions and deposits on heat exchanger surfaces in a boiler firedwith commercially available pellets and with pellets primed with magnesium oxide and magnesium hy...This work studies the amount of gaseous and particle emissions and deposits on heat exchanger surfaces in a boiler firedwith commercially available pellets and with pellets primed with magnesium oxide and magnesium hydroxide.The combustionexperiments were performed on a residential boiler of 20 kW.Substrates placed in the heat exchanger was analysed with SEM-EDX-mapping to evaluate the chemical composition of the deposits.The results show that particle emissions(PM 2.5)using the additivesincreased by about 50%and the mass of the deposits in the flue gas heat exchanger(excluding loose fly ash)increased by about25%compared to the combustion of pellets without additives.The amount of additives was found to be eight times higher than theamount of the main alkali metals potassium(K)and sodium(Na)which leads to the assumption that the additives were overdosedand therefore caused the problems reported.The SEM analysis of the substrates placed in the flue gas heat exchanger indicate that thedeposits of sodium(Na),potassium(K),chlorine(Cl)and sulphur(S)decrease using the additives.If this was due to theexpected chemical reactions or due to the loose fly ash covering the substrates after the test,could not be determined in this study.展开更多
基金performed within the project SWX-Energi and financed by the European UnionRegion Dalarna+1 种基金Region Gvleborgand Dalarna University
文摘This work studies the amount of gaseous and particle emissions and deposits on heat exchanger surfaces in a boiler firedwith commercially available pellets and with pellets primed with magnesium oxide and magnesium hydroxide.The combustionexperiments were performed on a residential boiler of 20 kW.Substrates placed in the heat exchanger was analysed with SEM-EDX-mapping to evaluate the chemical composition of the deposits.The results show that particle emissions(PM 2.5)using the additivesincreased by about 50%and the mass of the deposits in the flue gas heat exchanger(excluding loose fly ash)increased by about25%compared to the combustion of pellets without additives.The amount of additives was found to be eight times higher than theamount of the main alkali metals potassium(K)and sodium(Na)which leads to the assumption that the additives were overdosedand therefore caused the problems reported.The SEM analysis of the substrates placed in the flue gas heat exchanger indicate that thedeposits of sodium(Na),potassium(K),chlorine(Cl)and sulphur(S)decrease using the additives.If this was due to theexpected chemical reactions or due to the loose fly ash covering the substrates after the test,could not be determined in this study.
